1 / 38

Ideal Diode Equation

Ideal Diode Equation. Topics of This Lecture. Ideal Diode Equation Its origins Current versus Voltage (I-V) characteristics How to calculate the magnitude of the variables in the equation using real data What the limitations of this equation are How it is used in PSpice simulations.

konane
Download Presentation

Ideal Diode Equation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ideal Diode Equation

  2. Topics of This Lecture • Ideal Diode Equation • Its origins • Current versus Voltage (I-V) characteristics • How to calculate the magnitude of the variables in the equation using real data • What the limitations of this equation are • How it is used in PSpice simulations

  3. P-N junctions • The voltage developed across a p-n junction caused by • the diffusion of electrons from the n-side of the junction into the p-side and • the diffusion of holes from the p-side of the junction into the n-side

  4. Built-in Voltage

  5. Reminder • Drift currents only flow when there is an electric field present. • Diffusion currents only flow when there is a concentration difference for either the electrons or holes (or both).

  6. Symbol for Diode

  7. Biasing a Diode • When Va > 0V, the diode is forward biased • When Va < 0V, the diode is reverse biased

  8. When the applied voltage (Va) is zero • The diode voltage and current are equal to zero on average • Any electron that diffuses through the depletion region from the n-side to the p-side is counterbalanced by an electron that drifts from the p-side to the n-side • Any hole that diffuses through the depletion region from the p-side to the n-side is counterbalanced by an hole that drifts from the n-side to the p-side • So, at any one instant (well under a nanosecond), we may measure a diode current. This current gives rise to one of the sources of electronic noise.

  9. Modified from B. Van Zeghbroech, Principles of Semiconductor Devices http://ece-www.colorado.edu/~bart/book/ Schematically

  10. Applied voltage is less than zero • The energy barrier between the p-side and n-side of the diode became larger. • It becomes less favorable for diffusion currents to flow • It become more favorable for drift currents to flow • The diode current is non-zero • The amount of current that flows across the p-n junction depends on the number of electrons in the p-type material and the number of holes in the n-type material • Therefore, the more heavily doped the p-n junction is the smaller the current will be that flows when the diode is reverse biased

  11. Schematically Modified from B. Van Zeghbroech, Principles of Semiconductor Devices http://ece-www.colorado.edu/~bart/book/

  12. Plot of I-V of Diode with Small Negative Applied Voltage

  13. Applied Voltage is greater than zero • The energy barrier between the p-side and n-side of the diode became smaller with increasing positive applied voltage until there is no barrier left. • It becomes less favorable for drift currents to flow • There is no electric field left to force them to flow • There is nothing to prevent the diffusion currents to flow • The diode current is non-zero • The amount of current that flows across the p-n junction depends on the gradient of electrons (difference in the concentration) between the n- and p-type material and the gradient of holes between the p- and n-type material • The point at which the barrier becomes zero (the flat-band condition) depends on the value of the built-in voltage. The larger the built-in voltage, the more applied voltage is needed to remove the barrier. • It takes more applied voltage to get current to flow for a heavily doped p-n junction

  14. Schematically Modified from B. Van Zeghbroech, Principles of Semiconductor Devices http://ece-www.colorado.edu/~bart/book/

  15. Plot of I-V of Diode with Small Positive Applied Voltage

  16. Ideal Diode Equation • Empirical fit for both the negative and positive I-V of a diode when the magnitude of the applied voltage is reasonably small.

  17. Ideal Diode Equation Where ID and VD are the diode current and voltage, respectively q is the charge on the electron n is the ideality factor: n = 1 for indirect semiconductors (Si, Ge, etc.) n = 2 for direct semiconductors (GaAs, InP, etc.) k is Boltzmann’s constant T is temperature in Kelvin kT/q is also known as Vth, the thermal voltage. At 300K (room temperature), kT/q = 25.9mV

  18. Simplification • When VD is negative • When VD is positive

  19. To Find n and IS • Using the curve tracer, collect the I-V of a diode under small positive bias voltages • Plot the I-V as a semi-log • The y-intercept is equal to the natural log of the reverse saturation current • The slope of the line is proportional to 1/n

  20. Example

  21. Questions • How does the I-V characteristic of a heavily doped diode differ from that of a lightly doped diode? • Why does the I-V characteristics differ? • For any diode, how does the I-V characteristic change as temperature increases? • For the same doping concentration, how does the I-V characteristic of a wide bandgap (EG) semiconductor compare to a narrow bandgap semiconductor (say GaAs vs. Si)?

  22. What the Ideal Diode Equation Doesn’t Explain • I-V characteristics under large forward and reverse bias conditions • Large current flow when at a large negative voltage (Breakdown voltage, VBR) • ‘Linear’ relationship between ID and VD at reasonably large positive voltages (Va > ff)

  23. VBR or VZ Slope = 1/RS Slope = 1/rz Von

  24. Nonideal (but real) I-V Characteristic • Need another model • Modifications to Ideal Diode Equation are used in PSpice • We will see this in the list of parameters in the device model • We will use a different model • It is called the Piecewise Model

  25. PSpice • Simplest diode model in PSpice uses only the ideal diode equation • More complex diode models in PSpice include: • Parasitic resistances to account for the linear regions • Breakdown voltage with current multipliers to map the knee between Io and the current at breakdown • Temperature dependences of various parameters • Parasitic capacitances to account for the frequency dependence

  26. Capture versus Schematics • It doesn’t matter to me which you use • I find Schematics easier, but the lab encourages the use of Capture

  27. PSpice Schematics

  28. Device Parameters

  29. PSpice Capture

  30. Editing Device Model • The device parameters can be changed, but will only be changes for the file that you are currently working on. • In Schematics, the changes only apply to the specific part that you had highlighted when you made the changes. • In Capture, the changes apply to all components in the file that share the same part model. • To simulate the Ideal Diode Equation, you can delete the other parameters or set them to zero or a very large number, depending on what would be appropriate to remove their effect from the simulation

  31. Important Points of This Lecture • There are several different techniques that can be used to determine the diode voltage and current in a circuit • Ideal diode equation • Results are acceptable when voltages applied to diode are comparable or smaller than the turn-on voltage and more positive than about 75-90% of the breakdown voltage • Piecewise model • Results are acceptable when voltage applied to the diode are large in magnitude when comparable to the turn-on voltage and the breakdown voltage.

  32. Embedded in the Ideal Diode Equation are dependences on • Temperature • Doping concentration of p and n sides • Semiconductor material • Bandgap energy • Direct vs. indirect bandgap • PSpice diode model using Ideal Diode Eq. • User can edit diode model • Diode model can also be more complex to include deviations from Ideal Diode Eq. such as frequency dependence of operation

More Related