1 / 32

Sonorant Acoustics

Sonorant Acoustics. March 20, 2013. On the Horizon. Today: acoustics of sonorants Friday: more sonorant and stop acoustics plus an introduction to the motor theory of perception. Extremes. Not all music stays within a couple of octaves of middle C. Check this out:

kirima
Download Presentation

Sonorant Acoustics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sonorant Acoustics March 20, 2013

  2. On the Horizon • Today: acoustics of sonorants • Friday: more sonorant and stop acoustics • plus an introduction to the motor theory of perception

  3. Extremes • Not all music stays within a couple of octaves of middle C. • Check this out: • Source: “Der Rache Hölle kocht in meinem Herze”, from Die Zauberflöte, by Mozart. • Sung by: Sumi Jo • This particular piece of music contains an F6 note • The frequency of F6 is 1397 Hz. • (Most sopranos can’t sing this high.)

  4. Implications • Are there any potential problems with singing this high? • F1 (the first formant frequency) of most vowels is generally below 1000 Hz--even for females • There are no harmonics below 1000 Hz for the vocal tract “filter” to amplify • a problem with the sound source •  It’s apparently impossible for singers to make F1-based vowel distinctions when they sing this high. • But they have a trick up their sleeve...

  5. Singer’s Formant • Discovered by Johan Sundberg (1970) • another Swedish phonetician • Classically trained vocalists typically have a high frequency resonance around 3000 Hz when they sing. • This enables them to be heard over the din of the orchestra • It also provides them with higher-frequency resonances for high-pitched notes • Check out the F6 spectrum.

  6. more info at: http://www.ncvs.org/ncvs/tutorials/voiceprod/tutorial/singer.html How do they do it? • Evidently, singers form a short (~3 cm), narrow tube near their glottis by making a constriction with their epiglottis • This short tube resonates at around 3000 Hz • Check out the video evidence.

  7. Overtone Singing • F0 stays the same (on a “drone”), while singer shapes the vocal tract so that individual harmonics (“overtones”) resonate. • What kind of voice quality would be conducive to this?

  8. Vowels and Sonorants • So far, we’ve talked a lot about the acoustics of vowels: • Source: periodic openings and closings of the vocal folds. • Filter: characteristic resonant frequencies of the vocal tract (above the glottis) • Today, we’ll talk about the acoustics of sonorants: • Nasals • Laterals • Approximants • The source/filter characteristics of sonorants are similar to vowels… with a few interesting complications.

  9. Damping • One interesting acoustic property exhibited by (some) sonorants is damping. • Recall that resonance occurs when: • a sound wave travels through an object • that sound wave is reflected... • ...and reinforced, on a periodic basis • The periodic reinforcement sets up alternating patterns of high and low air pressure • = a standing wave

  10. Resonance in a closed tube t i m e

  11. Damping, schematized • In a closed tube: • With only one pressure pulse from the loudspeaker, the wave will eventually dampen and die out. • Why? • The walls of the tube absorb some of the acoustic energy, with each reflection of the standing wave.

  12. Damping Comparison • A heavily damped wave wil die out more quickly... • Than a lightly damped wave:

  13. Damping Factors • The amount of damping in a tube is a function of: • The volume of the tube • The surface area of the tube • The material of which the tube is made • More volume, more surface area = more damping • Think about the resonant characteristics of: • a Home Depot • a post-modern restaurant • a movie theater • an anechoic chamber

  14. An Anechoic Chamber

  15. Resonance and Recording • Remember: any room will reverberate at its characteristic resonant frequencies • Hence: high quality sound recordings need to be made in specially designed rooms which damp any reverberation • Examples: • Classroom recording (29 dB signal-to-noise ratio) • “Soundproof” booth (44 dB SNR) • Anechoic chamber (90 dB SNR)

  16. Spectrograms classroom “soundproof” booth

  17. Spectrograms anechoic chamber

  18. Inside Your Nose • In nasals, air flows through the nasal cavities. • The resonating “filter” of nasal sounds therefore has: • increased volume • increased surface area •  increased damping • Note: • the exact size and shape of the nasal cavities varies wildly from speaker to speaker.

  19. Nasal Variability • Measurements based on MRI data (Dang et al., 1994)

  20. Damping Effects, part 1 • Damping by the nasal cavities decreases the overall amplitude of the sound coming out through the nose. [m] [m]

  21. Damping Effects, part 2 • How might the power spectrum of an undamped wave: • Compare to that of a damped wave? • A: Undamped waves have only one component; • Damped waves have a broader range of components.

  22. Here’s Why 100 Hz sinewave + 90 Hz sinewave + 110 Hz sinewave

  23. The Result 90 Hz + 100 Hz + 110 Hz • If the 90 Hz and 110 Hz components have less amplitude than the 100 Hz wave, there will be less damping:

  24. Damping Spectra light medium

  25. Damping Spectra heavy • Damping increases the bandwidth of the resonating filter. • Bandwidth = the range of frequencies over which a filter will respond at .707 of its maximum output. •  Nasal formants will have a larger bandwidth than vowel formants.

  26. Bandwidth in Spectrograms F3 of F3 of [m] The formants in nasals have increased bandwidth, in comparison to the formants in vowels.

  27. Nasal Formants • The values of formant frequencies for nasal stops can be calculated according to the same formula that we used for to calculate formant frequencies for an open tube. • fn = (2n - 1) * c • 4L • The simplest case: uvular nasal . • The length of the tube is a combination of: • distance from glottis to uvula (9 cm) • distance from uvula to nares (12.5 cm) • An average tube length (for adult males): 21.5 cm

  28. The Math 12.5 cm • fn = (2n - 1) * c • 4L • L = 21.5 cm • c = 35000 cm/sec • F1 = 35000 • 86 • = 407 Hz • F2 = 1221 Hz • F3 = 2035 Hz 9 cm

  29. The Real Thing • Check out Peter’s production of an uvular nasal in Praat. • And also Dustin’s neutral vowel! • Note: the higher formants are low in amplitude • Some reasons why: • Overall damping • “Nostril-rounding” reduces intensity • Resonance is lost in the side passages of the sinuses. • Nasal stops with fronter places of articulation also have anti-formants.

  30. Anti-Formants • For nasal stops, the occlusion in the mouth creates a side cavity. • This side cavity resonates at particular frequencies. • These resonances absorb acoustic energy in the system. • They form anti-formants

  31. Anti-Formant Math • Anti-formant resonances are based on the length of the vocal tract tube. • For [m], this length is about 8 cm. 8 cm • fn = (2n - 1) * c • 4L L = 8 cm AF1 = 35000 / 4*8 = 1094 Hz AF2 = 3281 Hz etc.

  32. Spectral Signatures • In a spectrogram, acoustic energy lowers--or drops out completely--at the anti-formant frequencies. anti-formants

More Related