1 / 9

ARB’s Intent to Establish Evaporative Emission Standards for Pleasure Craft

ARB’s Intent to Establish Evaporative Emission Standards for Pleasure Craft. NMMA/ARB Meeting Feb. 7, 2006. Why is ARB Considering Evaporative Emission Standards for Pleasure Craft?. California needs significant additional emission reductions to attain ambient air quality standards.

kiddr
Download Presentation

ARB’s Intent to Establish Evaporative Emission Standards for Pleasure Craft

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ARB’s Intent to Establish Evaporative Emission Standards for Pleasure Craft NMMA/ARB Meeting Feb. 7, 2006

  2. Why is ARB Considering Evaporative Emission Standards for Pleasure Craft? • California needs significant additional emission reductions to attain ambient air quality standards. • There is a large population of pleasure craft within California (estimated at 850,000). • Evaporative emissions from pleasure craft are estimated to be 22 tons per day (annual average). • Cost effective solutions may be available.

  3. Potential Control Technologies to be Evaluated • Active and passively purged carbon canisters • Low permeation fuel hoses • Low permeation fuel tanks • Insulation

  4. ARB’s Baseline Evaporative Emissions Testing • ARB conducted baseline evaporative emissions testing on nine pleasure craft • Diurnal, hot soak, and some refueling data were generated • Running loss data is needed to complete the emissions inventory

  5. ARB’s Evaporative Emissions Testing (Continued) Note: Complete boats and PWC were tested in SHEDs.

  6. NMMA’s Evaporative Emissions Testing • ARB is willing to consider industry generated data to help determine potential standards • ARB is requesting that NMMA share its evaporative emissions data

  7. Next Steps for Rule Development(Tentative) • Initial Workshop • March 2006 • Emissions Inventory Development • Spring 2006 – Spring 2007 • Control Technology Evaluation • Summer 2006 – Summer 2007 • Development of Staff Proposal • Summer 2007 – Winter 2007 • Board Hearing • Early 2008

  8. Comments?

  9. Contacts Monitoring and Laboratory Division (For Questions Concerning the Rule Development) • Jim Watson • Manager, Engineering Development and Testing Section • (916) 327-1282, jwatson@arb.ca.gov • Donald Ridgley • Project Lead,Engineering Development and Testing Section • (916) 322-8913, dridgley@arb.ca.gov Planning and Technical Support Division (For Questions Concerning the Emissions Inventory) • David Chou • Manager, Off-Road Modeling and Assessment Section • (626) 450-6136, cchou@arb.ca.gov

More Related