1 / 5

How Thyristors operate?

How Thyristors operate?. If not gated, R=  in case -V RRM < V AK < +V RRM If V AK > 0 and gated (V GK =2…5 V) it starts conducting (R=0) and stays so even if the gate voltage disappears (latch) Once in conduction it turns automatically off (no command): If reverse biased ( V AK <0)

keziah
Download Presentation

How Thyristors operate?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How Thyristors operate? • If not gated, R= in case -VRRM < VAK < +VRRM • If VAK > 0 and gated (VGK =2…5 V) it starts conducting (R=0) and stays so even if the gate voltage disappears (latch) • Once in conduction it turns automatically off (no command): • If reverse biased (VAK <0) • If the current reaches zero (IK =0) for more than tq Vs Vload =“Firing angle” “Firing angle” for a diode rectifier: 0…180 (single phase) 30…150 (3-phase)

  2. 3-phase Fully Ctrl Bridge Rectifier (1) h Line A Id=const A x T1 T5 T3 a’ Neutral b’ Vxy c’ 0 h T4 T6 T2 C y B h ia Armature winding of DC motors for 4-quadrant operation (elevators) = 30  T1 T3 T5  Vx T4 T6 T2 Vy  Vxy ia

  3. 3-phase Fully Ctrl Bridge Rectifier (2) Volt-time area loss due to overlap Volt-time area loss due to delayed firing Volt-time area loss due to the firing delay  Adjustable Loss of mean voltage from Vx Loss from Vxy Ideal diode rectifier

  4. 3-phase Fully Ctrl Bridge Rectifier (3) h A Id=const x T1 T3 ia VBA a’ b’ ib 0 h B Voltage drop due to overlap is the same as in the 3-phase diode rectifier Calculation of  Easiest way to find it is by considering the following loop: VBA Area = 2 Id *h   • During this time, Vba causes the change of : • ia from Id to 0 • ib from 0 to Id  

  5. 3-phase Fully Ctrl Bridge Rectifier (4) Line Current Waveforms +Id  +30 120 -Id 0 T/2 T Exactly the same waveform as for the diode rectifier but displaced by  > Id (peak) RMS input current: Displacement factor DPF = cos () Distortion factor DF = Power factor PF is very poor at low output voltage  near 90

More Related