1 / 7

Multi-Piece Rim Assembly Component Matching

Multi-Piece Rim Assembly Component Matching. DOT Identifications. Found on weather side of each component Stamped into components Visually inspect each component to identify markings Ensure component compatibility using markings found on components and OSHA wall chart. I.D. Stampings.

kenley
Download Presentation

Multi-Piece Rim Assembly Component Matching

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Multi-Piece Rim Assembly Component Matching

  2. DOT Identifications • Found on weather side of each component • Stamped into components • Visually inspect each component to identify markings • Ensure component compatibility using markings found on components and OSHA wall chart

  3. I.D. Stampings Example of Markings

  4. Compatibility Information Review OSHA Wall Chart to Ensure Component Compatibility

  5. If Mismatched ComponentsAre Identified • Evacuate trajectory zones - - do not handle assembly • Immediately report to supervisor

  6. Trajectory Zones

  7. Supervisor Actions • Ensure trajectory zones are evacuated • Barricade effected areas • Install temporary barriers • Contact tire specialist to mitigate and remove hazard

More Related