FURNITURE 32MM SYSTEM - PowerPoint PPT Presentation

slide1 n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
FURNITURE 32MM SYSTEM PowerPoint Presentation
Download Presentation
FURNITURE 32MM SYSTEM

play fullscreen
1 / 6
FURNITURE 32MM SYSTEM
302 Views
Download Presentation
keefe-rocha
Download Presentation

FURNITURE 32MM SYSTEM

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. FURNITURE 32MM SYSTEM A BRIEF INTRODUCTION

  2. Furniture 32mm System Introduction 32mm System is an industrial standard which has been agreed by furniture and furniture fittings manufacturers worldwide. It originates from the center to center spacing of the drill pattern. Basic Rules System hole diameter: Ø5mm Hole spacing: 32mm 3. Distance between center of hole line and front edge of side panel: 37mm Distance between rear hole center line and rear edge of side panel: 37mm  The first and last hole in a hole line should be the same distance from the top and bottom edges of side panel

  3. Furniture 32mm System Introduction 32mm System Advantages • Suitable for mass production, improve production effectiveness, reduce cost • Reduce new product design and development cycle time by using standardized furniture fittings • Improve hole position accuracy, improve furniture quality • Furniture fittings interchangeable from different manufacturers • Make KD(knock-down) furniture and DIY easier Furniture fittings designed to 32mm system 1. Metal shelf support Shelf support diameter is designed equal to side panel drilling hole diameter: Ø5mm

  4. Furniture 32mm System Introduction 2. Concealed hinge Mounting plate 2 fixing holes center distance: 32mm Hole center line to the front edge of side panel distance: 37mm 3. Side panel drilling hole: Ø5mm

  5. Furniture 32mm System Introduction 3. Drawer runner 1. Fixing hole center to the front edge of side panel distance: 37mm 2. Fixing hole spacing patten is: 32mm system 3. Side panel drilling hole: Ø5mm

  6. The End The End !