1 / 30

MACH2 WeSpeakMachine

How to install a WISE-4051 Device. Presented By: Mark Brown Kors Engineering. MACH2 www.WeSpeakMachine.com. Lines Muted Raise Hand for Questions Recording of Webinar to be Emailed Short Survey at the end. MACH2 www.WeSpeakMachine.com. Agenda. What is a WISE-4051 ?.

katzm
Download Presentation

MACH2 WeSpeakMachine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to install a WISE-4051 Device Presented By: Mark Brown Kors Engineering MACH2 www.WeSpeakMachine.com

  2. Lines Muted Raise Hand for Questions Recording of Webinar to be Emailed Short Survey at the end MACH2 www.WeSpeakMachine.com

  3. Agenda • What is a WISE-4051? • What can I use the WISE-4051 for? • How do I wirea WISE-4051? • How do I program a WISE-4051? • How do I configure Kepware to talk to it? MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  4. What is a WISE-4051? • A stand-alone devise that allows us to monitor equipment that does not have a PLC, or has a PLC that does not have a way to connect to the plant’s network. • Has 8 digital input (DI) points. • Each digital input drives an internal counter. • Lives on a Wi-Fi network, allows the Mach2 server to read the counters. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  5. What can the device be used for? • Our most typical use: Your existing machine provides a dry contact input that closes, then opens, each time the machine completes a “cycle”. This input is used as Mach2’s “CycleCounter”. • One WISE device can be used to monitor multiple machines, or multiple points within the same machine. • It can also monitor any other status that you would like from your existing machine through additional dry contact inputs. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  6. Getting Started… • Things you’ll need: • A WISE-4051 (duh). • A 24VDC power source. • A small, flat blade screwdriver (3/32”). • A cell phone, or other device to connect via Wi-Fi (no special app is required, simply a web browser). • From the network the WISE is going to be attached to: • A dedicated IP address. • The subnet mask & gateway. • The network’s SSID. • The network’s security “Type” (Open, WPA/WPA2). • The network’s security key (password). MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  7. How to Wire a WISE-4051 (Power) MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  8. How to Wire a WISE-4051 (Input Signals) • Connect dry contacts from your machine (WorkCenter): MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  9. How to Program a WISE-4051 • (Attaching to the Device) • Remove power. • On the back side of the WISE, set DIP “Switch 1” of “Bank 1”down. • Re-apply power. • On your cell phone (or PC), enable the Wi-Fi interface (make sure you’re set up for DHCP mode). • Select the SSID: WISE-4051_XXX • Open a browser, enter the configuration page’s URL: http:192.168.1.1/configand you should see this popup: MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  10. How to Program a WISE-4051 • (Logging In) • In “Account”, enter root (case sensitive). root 00000000 • In “Password”, enter 00000000 (8 zeros). • Press “Login”. (This will take you to the general Information screen in the next section to begin the configuration process.) MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  11. How to Program a WISE-4051 • (Information Setup) • Select “Configuration” in the left column. • Select the “Information” tab on the top. • If you like, you can enter descriptions in the listed blanks (not mandatory). • Select “Submit”. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  12. How to Program a WISE-4051 • (Wi-Fi Setup) • Select the “Wireless” tab on the top. • Under “WLAN Mode”, select • “Infrastructure Mode ”. • Enter your SSID . • Enter your Security Type. • Enter your Security Key, (then scroll down). MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  13. How to Program a WISE-4051 • (Wi-Fi Setup) • Enter the IP assigned. • Enter the Subnet Mask . • Enter the Gateway. • Select “IP Mode”: “Static”. • Select “Submit”. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  14. How to Program a WISE-4051 • (Counter Setup) • Select “I/O Status” on the left. • Select the “Configuration” tab. • Under “Channel”, select “All”. • Under “Mode”, select “Counter”. • Check the box “Digital Filter” to enable it. • Set “Min Low Signal Width” = 500 .* • Set “Min High Signal Width” = 500 .* • Check the box “Keep Last Value”. • Select “Submit”. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  15. How to Program a WISE-4051 • (Counter Setup) • Scroll down to see the results of your selections: MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  16. How to Program a WISE-4051 • (Counter Testing) • Select the “Status” tab. • Confirm that the “Mode” for each counter is set to “Counter”. • Confirm that each channel’s slider is set to “Start” (this enables the counter to increment). • Observe that each time one of the dry contacts cycle, the associated counter’s “Status” increments by 1. • Each counter can be reset to “0” by pressing the associated “Reset” button MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  17. How to Program a WISE-4051 • (Releasing it to the wild) • Power the device down. • Set all the DIP switches back to the “Up” position. • Reapply power. The original SSID (WISE-4051_XXX) will no longer be visible from your phone, but now the WISE will appear on your network on the newly entered IP. • Within a few seconds, you should get an indication on the unit that it is communicating by observing the LED indicators. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  18. How to Program a WISE-4051 • (Releasing it to the wild…) • Status/Com: • Blinking Green when module starts to work. • Blinking Yellow when communicating. • AP/Infra: Green = On in “AP Mode”. • Off in “Station Mode” (Infrastructure). • Signal Indicator: Signal strength in “Station Mode”. • TX: Blinks when it is transmitting data. • RX: Blinks when it is receiving data. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  19. How to Install a WISE-4051 • (Input / Counter Modbus Addressing) MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  20. How to Install a WISE-4051 • (Kepware Configuration) • Open the Kepware Configurator. • Select “Click to add a channel”. • Scroll down and select “Modbus TCP/IP Ethernet”. • Select “Next. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  21. How to Install a WISE-4051 • (Kepware Configuration) • Set a Name for the channel. (typically the WorkCenter’s PLC name, but for this example, we’ll use “Training”). • Select “Next”. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  22. How to Install a WISE-4051 • (Kepware Configuration) • Accept the default settings by selecting “Next” for the next several screens until you see this screen. • Review your settings, and if everything looks Ok, select “Finish”. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  23. How to Install a WISE-4051 • (Kepware Configuration) • Select “Click to add a device”. • Enter a name (for this example we’ll use “WISE”, typically we would use “PLC”). • Select “Next”. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  24. How to Install a WISE-4051 • (Kepware Configuration) • Enter the desired IP, leaving the other text in place. • Select “Next”. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  25. How to Install a WISE-4051 • (Kepware Configuration) • Accept the default settings by selecting “Next” for the next several (9-10) screens until you see this screen:”. • Review your entries, then select “Finish” at the bottom. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  26. How to Install a WISE-4051 • (Kepware Configuration) • You’ll be taken to this screen, (notice your IP is listed): • Select “WISE”. • “Select “Click to add a static tag”. MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  27. How to Install a WISE-4051 • (Kepware Configuration) • Enter a “Name” for the new point (CycleCounter): • Enter an “Address” (40001, 40003, 40005, etc.): • Leave the “Data Type” at the default setting (Word): • Select “Read Only”: • Select “OK”: MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  28. How to Install a WISE-4051 MACH2 www.WeSpeakMachine.com Brochure Screens Confidential

  29. Upcoming Mach2 Training Webinar Benefits of using a Mach2 Thick Client July 25th, 2019 2:00 PM – 3:00 PM EST Presented By: Mike Arnott Register on www.KorsEngineering.com Evites to also be sent shortly MACH2 www.WeSpeakMachine.com

  30. QUESTIONS ? Mark Brown Mark@KorsEngineering.com Support Page: www.KorsEngineering.com/Support Phone: (248) 706-1540 MACH2 www.WeSpeakMachine.com

More Related