1 / 32

US Concrete Products: Cement and Aggregates for Long-Term Durability

Learn about US Concrete Products' high-quality cement and aggregates, meeting ASTM standards for durability. Find out how our products optimize material use and ensure long-term performance.

johncarson
Download Presentation

US Concrete Products: Cement and Aggregates for Long-Term Durability

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Presentation Summary • Company History • Concrete Basics • USCP’s Product Line / Highlights • Manufacturing Plant • Questions

  2. US Concrete Products • Started in 2000 • Principals’ background with the Sakrete Company • Did all company specialty product mix designs

  3. Concrete Basics • Its as simple at 1-2-3 • 1 part cement meeting ASTM C 150, 2 parts concrete sand meeting ASTM C 33, 3 parts coarse aggregate meeting ASTM C 33

  4. ASTM Designations – Why they are important • Cement meeting ASTM C 150 assures the proper chemical make up for consistency in performance and long term durability • Foreign imported cements can be cheaper but you don’t know exactly what you are getting from shipment to shipment

  5. ASTM Designations – Why they are important • Aggregates meeting ASTM C 33 gradation requirements assures the proper particle size distribution • Proper particle sized distribution is critical to produce concrete with long term durability

  6. ASTM C 33 – Concrete Sand Sieve (Specification E 11) Percent Passing 9.5-mm (3⁄8-in.) 100 4.75-mm (No. 4) 95 to 100 2.36-mm (No. 8) 80 to 100 1.18-mm (No. 16) 50 to 85 600-μm (No. 30) 25 to 60 300-μm (No. 50) 5 to 30 150-μm (No. 100) 0 to 10

  7. ASTM C 33 – #8 or 3/8” Aggregate Sieve (Specification E 11) Percent Passing 12.5-mm (1/2-in.) 100 9.5-mm (3/8-in.) 85-100 4.75-mm (No. 4) 10-30 2.36-mm (No. 8) 0-10 1.18-mm (No. 16) 0-5 600-μm (No. 30) 300-μm (No. 50) 150-μm (No. 100)

  8. Total Particle Size Distribution • 7 different sizes total between 3/8” #50 sieve • Cement fills the voids between the particle sizes

  9. Total Particle Size Distribution – Why is this important? • The matrix created helps assure the long term durability of the concrete • Assures water addition is not excessive – too much fine aggregate needs more water • Optimizes the use of materials

  10. Typical Sand Gradation – Competitors use Sieve (Specification E 11) Percent Passing 9.5-mm (3⁄8-in.) 100 4.75-mm (No. 4) 100 2.36-mm (No. 8) 100 1.18-mm (No. 16) 50 to 85 600-μm (No. 30) 30 to 40 300-μm (No. 50) 0 to 10 150-μm (No. 100) 0

  11. Why do they use this gradation? • Most of the major suppliers have their sand dried by another company • The sand used is conveyed pneumatically • Multiple particle sizes as defined by ASTM C 33 would segregate in the pnuematic conveying process

  12. How do we know this? • USCP dries aggregate for major competitors

  13. What are full depth concrete repair materials? • Full-Depth Repairs • 4.0 Material Considerations • Typical full-depth repair operations utilize concrete mixes containing 390-502kg/m3 (658-846 lbs/yd3) of either cement Type I or Type III cement. A set-accelerator is frequently used to permit opening in 4 to 6 hours. . . . Regardless of the mix design used, the concrete mixture for full-depth repairs should have the following properties: • 6.5 ± 1.5 percent of entrained air in the concrete (less air may be permissible in nonfreeze areas). • 50 to 100 mm (2 to 4 in.) slump • Mixes using Type III cement may require slightly more mix water than a similar mix with Type I portland cement. However, too much extra water may cause the concrete to suffer from high shrinkage during curing. A water-reducing admixture will disperse cement particles and reduce the water necessary for workability. Above can be found at http://www.fhwa.dot.gov/pavement/full4.htm . Pvement Technology on FHA website.

  14. Deck Mix line for full depth repair • Engineered concrete in pre-packaged form • Single component • Graded coarse & fine aggregates for proper particle-size distribution • ASTM C33 concrete sand with gravel meeting ASTM #8 (3/8”) • AE - 80lb. bag, .61 cu.ft. • FP – 50lb. Bag, .42 cu.ft. (neat) .52 cu.ft (ext) • Air-entrained • Corrosion inhibitor

  15. Full Depth Repair Deck Mix AE & FP • Deck Mix AE – Air Entrained Concrete with Corrosion Inhibitor • Deck Mix FP – Air Entrained with Corrosion Inhibitor, designed specifically for form and pump applications

  16. Just add water Contains gravel Air entrained 6” slump at time of placement Water/Cement ratio of .37 Shrinkage Compensated Corrosion Inhibitor Features of Deck Mix AE & FP:

  17. Technical Information-Deck Mix Ae • Length Change (ASTM C 157 - dry cured): -0.028% @ 28 days • 6.5% Air Entrainment (+/- 1.25%) • Compressive strength (ASTM C 39 - 6”x12” Cylinders) : 1 day 7 days 28 days 2000 psi 4000 psi 6000+psi • Bond strength (ASTM C 882) : 1 day 7 days 28 days 350 psi 890 psi 1800+psi

  18. What is HP Cement? • A very fast setting portland cement based system • 30 minute final setting time • Free of sulfates (Gypsum) and high alumina cement

  19. What Makes HP Cement Unique? • Very low heat of hydration • Very low shrinkage • Excellent durability and resistance to freeze thaw cycling • Economical • Includes a corrosion inhibitor

  20. Benefits from a low exotherm: • Eliminates thermal cracking • Setting times are less affected by ambient temperatures • Predictability of setting times

  21. HP Concrete • Full depth fast setting concrete • Just add water • 6”+ slump • Manufactured with 3/8” pea gravel • Excellent resistance to freeze thaw cycling • Coatings(100% Solids) applied within 24 – 48 hours

  22. HP Concrete Mix Properties • 6-8” slump • 6.5% air content • .38 water/cement ratio

  23. HP Concrete - Technical Information: • Compressive Strength (ASTM C 39) : 2 Hours1 Day7 Days28 Days 2750 psi 4500 psi 5000 psi 6000 + psi • Flexural Strength(ASTM C 293): 28 days 800 psi

  24. HP Concrete - Technical Information: • Freeze thaw cycling - (ASTM C 666): 25 cycles50 cycles100 cycles300 cycles Loss -.02% -0.025% -0.028% -0.08% RDM 100% 100% 104% 101%

  25. HP Concrete - Technical Information: • Length change (ASTM C 157 – dry cured): 1 day28 days 56 days 150 days 0.0011% -0.023% -0.023% -0.025%

  26. Project References – HP Concrete: Logan Airport • Runway Repairs • Gate Areas • Centerline Lighting Replacement

  27. Project References: HP Concrete • MAA - BWI Main Terminal Parking Deck Full-Depth Repairs VStructural / Parsons Engineering • Quest Communications Garage Full-Depth Column Repairs Consolidated Waterproofing / SK & A

  28. Project References: Deck Mix AE • DHL Service Center – New York, NY Full-Depth Repairs Structural Preservation / McMullen • Watergate at Landmark – Wash, DC Balcony Overlays and Full-Depth Concrete Protection & Restoration / TCE

  29. Reliable • Consistent • Flexable

  30. بزرگترین بانک پاورپوینت ایرانwww.txtzoom.comبانک هوشمند اسناد متنی

More Related