Explain Open & Close Silver Bezel Setting of Any Size Stone

1. Explain Open & Close Silver Bezel Setting of Any Size Stone Bio link https://jindalgemsblog.wordpress.com/2021/02/13/stone-silver-bezel-setting/

2. You may have some jewelry pieces embedded with precious stones. These stones are removed before repairing your silver jewelry. It is easy to remove these heat sensitive stones from jewellery while repairing it with heat. Do you have any idea about how you can separate silver bezel setting from these stones?

3. Fine Silver Bezel Setting Process Opening and closing a silver bezel setting of Any Size Stone can be difficult without proper knowledge of the process. Here in this guide, we have mentioned steps to learn the process in simple steps.

4. Step 1: Close examination will make it easy for you to know whether there are small gaps or openings between the bezel and stone. You should always make it a point to take this step as your first before opening the bezel setting. If you find these gaps or settings, then focus on them and open them. If you do not find these gaps, then try to find out the places where you can find some space to slide thin blade or a scalpel. The metal is soft that you are working with, so always be cautious while doing so. You should also follow the useful tips for bezel setting.

5. Step 2: If you are done with creating a gap between the stone and bezel setting using a blade, then you should use some tools to take the next step. You may use polished bezel lifter and place its tip into the gap you. You can push the other side against the bezels inside and you can leave the flat side resting. You can slide the tool along the bezels edge and outward. It will help remove the stone.

6. Step 3: You may need sticky wax to get stone out of the bezel setting. You should mark the stone’s bottom and its irregular shaping. This way you can easily reset the stone in proper way. You can also make marks in bezel. You should know more about bezel set cabochon stone.

7. Step 4: Now, you can repair the jewellery pieces and clean it. Resetting is the next step one you are done with restoring. You must use sticky wax to carefully pick up the stone, as this step is quite important. Use mark on the stone as directs that will help you to adjust it properly. One you decide to proceed after completing the entire process of lining up, you will be able to place the stone in this setting. This is about opening the bezel setting and placing the stone. Now, you should understand how to close the bezel. You can also work on bezel set faceted stone by learning these tips.

8. Step 5: You may need roller to close a bezel. This is quite useful tool that allows you to control pressure. With this tool, you will be able to know where the pressure is required the most and you can do it perfectly. This tool also presses and smoothes metal against the stone at the same time. You should position this tool against the bezel’s top edge; it prevents it from touching the stone. You can create a tight fist after rolling the edge over the bezel. You can close the bezel’s ends first and then its sides. This can be a tricky part and you have to be very careful while working with roller.

9. You can just polish the jewellery piece again and make it looks amazing. This is all about fine silver bezel settings. These steps can make the things easier and fun for you and requires less effort. Source link https://jindalgemsblog.wordpress.com