1 / 31

Chapter 6 - BENDING

Chapter 6 - BENDING. First, V & M diagrams (statics), then flexure formula for stress!!. Chapter 6 – Sections 1 and 2. There are three ways to construct shear and moment diagrams: By taking cuts and summing forces and moments, i.e. Note: Get equations for V and M, just plot equations.

jared
Download Presentation

Chapter 6 - BENDING

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 6 - BENDING First, V & M diagrams (statics), then flexure formula for stress!!

  2. Chapter 6 – Sections 1 and 2 • There are three ways to construct shear and moment diagrams: • By taking cuts and summing forces and moments, i.e. Note: Get equations for V and M, just plot equations

  3. 2. By Inspection: Do not get actual equations, good if just after Vmax and Mmax

  4. 3. By Direct Integration: Good if w(x) is a complicated function, i.e. w(x) = 4sin3xw(x) = 5X3 + 3X2 + 2X +9

  5. EXAMPLES: Use the approach that makes most sense. Inspection most common.

More Related