1 / 10

ＰＣ　Setup Method

ＰＣ　Setup Method. ＊ pls connect PC via Lan cable to DVR ＊ click Intranet icon, then click the “content”. ＰＣ　設定方法. ＊ pls find the window of “ Intemet Protocol (TCP/IP)”, then click “content” 。. ＰＣ　設定方法. ＊ then set IP as ： １９２．１６８．５０．１ and gate ： ２５５．２５５．２５５．０. ＰＣ　設定方法.

iris-ball
Download Presentation

ＰＣ　Setup Method

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ＰＣ　Setup Method ＊pls connect PC via Lan cable to DVR ＊click Intranet icon, then click the “content”

  2. ＰＣ　設定方法 ＊pls find the window of “ Intemet Protocol (TCP/IP)”, then click “content”。

  3. ＰＣ　設定方法 ＊then set IP as： １９２．１６８．５０．１ and gate： ２５５．２５５．２５５．０

  4. ＰＣ　設定方法 ＊then open the file ：　 ethDownloader_V3.5

  5. ＰＣ　設定方法 ＊Target IP: 192.168.50.2 ＊Image Path: Then select the firmware file “iDVR400T2.4.61.116ENCU.img”

  6. SDVR-PRO3204 setup method ＊under Live mode, press the “menu” key on the panel ＊ then keyin password “1234”, then “Enter”

  7. SDVR-PRO3204 ＊select “System”, then select”Network”

  8. SDVR-PRO3204 ＊Select “NEXT” ＊then set “IP Address” as： 192.168.50.2 then press “confirm”, then exit from the menu

  9. V004HB　設定方法 （picture 1） ＊once IP is set and exit from menu, then will show the message of “confirm”。Select “OK”, then hold at the same time the key “SCR”+”Exit” until you see the message like picture 2. Picture 2

  10. ＰＣ　Setup method （一） ＊then in “ethDownloader_V3.5”, press “Download(Enter key)”。 ＊then the Firmware is updated as picture 2 Image Written 100% Reboot Please ok Then restart, then the update is done （picture 2）

More Related