1 / 25

Loran-C Receiver

Loran-C Receiver. Team Deathstar September 7, 2004. Capstone Fall 2004. Group Members. Matt Anderson (ECE) Chris Birschbach (ECE) Christy Corner (EE) Matt Hayman (EE) Erin Mowbray (ECE). Background: What is Loran-C?.

imelda
Download Presentation

Loran-C Receiver

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Loran-C Receiver Team Deathstar September 7, 2004 Capstone Fall 2004

  2. Group Members • Matt Anderson (ECE) • Chris Birschbach (ECE) • Christy Corner (EE) • Matt Hayman (EE) • Erin Mowbray (ECE)

  3. Background: What is Loran-C? • Loran-C is a navigation system that was developed by the US Coast Guard. • The system is comprised of transmission stations located around the world. • The Loran-C signal is transmitted from these stations at specified intervals. • By measuring the time delay between transmissions a user can determine their position relative to the towers.

  4. Loran-C Signal

  5. Loran-C Signal continued • The Loran-C signal is transmitted on a 100kHz carrier.

  6. Project Purpose • Our group will design a receiver that will be able to capture and decode the Loran-C signal maintained by the United States Coast Guard. • Our system will consist of three main parts: the antenna/receiver, processing unit and personal computer.

  7. Project Funding • Undergraduate Research Opportunities Program (UROP) Grant. • Amount: $1750

  8. Tentative Budget

  9. Project Objectives • Capture a clean copy of the Loran-C signal • Determine Time Delays • Convert to a Latitudinal & Longitudinal coordinates.

  10. Outline of Approach • The system will consist of the following subsystems: • Antenna Receiver • Analog-to-digital converter • Motorola 68K processor • Memory • FPGA • Serial Interface • PC • Power

  11. Subsystems Diagram Processing Unit A/D Converter Antenna/Receiver FPGA Processor PC RAM

  12. Antenna Receiver Subsystem • The antenna/receiver will consist of a loop antenna with a active Butterworth filter to capture and amplify the fundamental signal received by the antenna. • This segment of the project serves the main purpose of capturing the Loran-C signal with minimal noise and preparing it for processing.

  13. Analog-to-Digital Converter Subsystem • The A/D converter will sample the analog signal. • Sampling rate will be 1MHz. • The digital data will be sent to the FPGA .

  14. FPGA Subsystem • The FPGA has a state machine for detecting the third zero crossing of the Loran-C signal. (Generates an interrupt) • It functions as a counter to measure the delay between pulses. • It includes an interrupt controller for the processor.

  15. Processor Subsystem • Upon generation of an interrupt, the processor stores the counter data from the FPGA into RAM. • Performs operations on the counter data to determine time delays and stores the delays in RAM. • The microcontroller sends the time delay data to the serial interface with the PC.

  16. RAM Subsystem • Holds the time delay and counter data for processing and transmission.

  17. Serial Interface Subsystem • The communication interface between the PC and the processor. • Consists of a serial shift register & RS-232 logic level converter.

  18. PC Subsystem • Displays the time delays. • Performs intensive conversion calculations to convert data into Latitudinal and Longitudinal coordinates. • Displays the Latitudinal and Longitudinal coordinates.

  19. Power • Transform, rectify, and regulate voltage from standard 120V/60Hz outlet to required DC voltages. (Or purchase power supply) • Include portable power sources (battery or car adapter) if time permits

  20. Tasks • Antenna Design • Filtering • PCB design • Memory interface • FPGA design • PC programming • PC interface • A/D interface • Processor programming • Power • Users Manual

  21. Schedule

  22. Division of Labor • Matt A • Power • Memory interface • Microprocessor Programming • Chris B • PC programming • Microprocessor programming • User’s Manual • Christy C • Antenna/Filtering • Verilog Design • User’s Manual • Matt H • Antenna/Filtering • PCB • Microprocessor Programming • PC programming • Erin M • Verilog Design • User’s Manual • PC interface

  23. Risks and Backup • Receiving a clean copy of the signal (Can generate a fake signal) • Baud rate generation for PC/processor communication • Buffer overflow (Sample slower) • Size and complexity of the state machine. (Can shift tasks from the FPGA to the processor to compensate.) • RS-232 Communication on PC (Manually entering data into the conversion program)

  24. Above and Beyond • If time permits we shall include a LCD display on our receiver that displays the Loran-C time delays. • Portable power sources. • Cup Holders

  25. Questions and Comments

More Related