1 / 68

Electrical Safety: Work Practices and Regulations (100 characters)

This course introduces basic concepts and techniques of electrical safety, providing skills for personnel who may come into contact with electrical hazards. It covers OSHA safety standards and industry consensus standards, as well as program requirements and training for both qualified and unqualified persons. Retraining requirements and the importance of electrical safety in reducing accidents and injuries are also discussed.

idaliac
Download Presentation

Electrical Safety: Work Practices and Regulations (100 characters)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ELECTRICAL SAFETY SAFETY RELATED WORK PRACTICES 29 CFR 1910.331-335 WELCOME

  2. COURSE OBJECTIVES • Accident Prevention. • Introduce Electrical Safety and Establish Its Role in Today’s Industry. • Introduce Basic Concepts and Techniques of Electrical Safety Related Work Practices. • Provide Electrical Safety Skills for Personnel Who May Come Into Contact With Electrical Hazards.

  3. BASIS FOR THIS COURSE • Electrical Safety Results in Accident Reduction • Elimination of Workplace Injuries & Illnesses Where Possible • Reduction of Workplace Injuries & Illnesses Where Possible • Development of Efficient Electrical Safety Techniques • OSHA Safety Standards Require: • Workers Be Properly Protected Against Injury • Training Be Conducted • Electrical Hazards and Precautions Be Explained • An “Electrical Safety” Program Be Established • Job Electrical Hazards Be Assessed and Controlled • Personal Protective Equipment Be Provided

  4. APPLICABLE REGULATIONS • 29CFR - Safety and Health Standards • 1910 - Industrial Safety • Sub Part S - Electrical • 331 - Scope of the Requirements • 332 - Training Requirements • 333 - Selection/Use of Work Practices • 334 - Use of Equipment • 335 - Safeguards for Personnel

  5. INDUSTRY CONSENSUS STANDARDS ANSI - C2-81 National Electrical Safety Code NFPA - 70-78 National Electrical Code - 70E Electrical Safety in Workplaces

  6. PROGRAM REQUIREMENTS ALL EMPLOYERS MUST: • Safeguard Electrical Sources. • Review Job Specific Hazards. • Implement Corrective Actions. • Conduct Hazard Assessments. • Conduct Accident Investigations. • Provide Training to All Required Employees. • Control Workplace Hazards Using PPE As a Last Resort.

  7. TRAINING FOR UNQUALIFIED PERSONS THE EMPLOYER MUST PROVIDE TRAINING: • Train in Safety Related Work Practices. • Conduct Training Prior to Job Assignment. • Explain The Specific Regulations That Apply. • Explain The Hazards Associated with Electricity.

  8. TRAINING FOR QUALIFIED PERSONS THE EMPLOYER MUST PROVIDE TRAINING: • Train in Safety Related Work Practices. • Conduct Training Prior to Job Assignment. • Explain The Specific Regulations That Apply. • Explain The Hazards Associated with Electricity. • Teach Them to Determine The Nominal Voltage of Live Parts. • Teach Them Determine The Clearance Distances of Live Parts. • Teach Them to Distinguish Between Live Parts and Other Parts.

  9. RETRAINING REQUIREMENTS • REQUIRED WHEN THERE IS A: • New Electrical Hazard. • Program Related Injury. • Change in Job Assignment. • New Equipment Introduced. • New Hazard Control Methods. • Failure in the Safety Work Practices. • Reason to Doubt Employee Proficiency.

  10. Improve Quality. Improve Absenteeism. Maintain a Healthier Work Force. Reduce Injury and Illness Rates. Acceptance of High-Turnover Jobs. Workers Feel Good About Their Work. Reduce Workers’ Compensation Costs. Elevate SAFETY to a Higher Level of Awareness. ELECTRICAL SAFETY IS IMPORTANT A GOOD PROGRAM WILL HELP:

  11. DEDICATION PERSONAL INTEREST MANAGEMENT COMMITMENT PROGRAM IMPLEMENTATION IMPLEMENTATION OF A ELECTRICAL SAFETY PROGRAM REQUIRES: NOTE: UNDERSTANDING AND SUPPORT FROM THE WORK FORCE IS ESSENTIAL, WITHOUT IT THE PROGRAM WILL FAIL!

  12. Considerations: MANAGEMENT’S ROLE • 1. Get Involved. • 2. Ensure Your Support Is Visible. • 3. Support the Electrical Safety Effort. • 4. Implement Ways to Measure Effectiveness. • 5. Attend the Same Training As Your Workers. • 6. Insist on Periodic Follow-up & Program Review. • 7. Follow-up on the Actions You Took.

  13. Considerations: THE SUPERVISOR’S ROLE • 1. Get Involved. • 2. Get Your Workers Involved. • 3. Never Ridicule Any Injury or Near Miss. • 4. Treat All “Near-Misses” As an Accident. • 5. Complete the Paperwork for Improvements. • 6. Attend the Same Training As Your Workers. • 7. Be Professional - You Could Save a Life Today. • 8. Get Involved in the Safeguarding of Electrical Sources. • 9. Follow-up on the Actions You Took.

  14. Considerations: THE EMPLOYEE’S ROLE • 1. Get Involved. • 2. Contribute to Make Corrective Actions. • 3. Know the Hazards Associated with Your Job. • 4. Report All Accidents and Near-Misses Immediately. • 5. Always Provide Complete and Accurate Information. • 6. Report All Electrical Safety Problems or Deficiencies. • 7. Follow-up With Any Additional Information.

  15. Document Meetings. Encourage Employee Involvement. Provide Feedback Without Fear of Reprisal. Make Recommendations for Corrective Action. Analyze Statistical Data Concerning Accidents. Hold Regular Electrical Safety Review Meetings. Bring Employee Concerns to Management's Attention. Follow-up Is Critical. SAFETY COMMITTEE • Safety Committees Should:

  16. WORK COVERED BY 331-335 The provisions of 29 CFR 1910.331 - 335 cover electrical safety work practices for both qualified and unqualified persons working on, near, or with: 1. PREMISES WIRING 2. WIRING FOR CONNECTIONS TO SUPPLY 3. OUTSIDE CONDUCTORS ON THE PREMISES

  17. EXCLUDED WORK The provisions of 29 CFR 1910.331 - 335 do not apply to electrical safety work practices for both qualified and unqualified persons working on, or directly with: 1. POWER GENERATION* 2. POWER TRANSMISSION* 3. POWER DISTRIBUTION* * Covered under other regulations

  18. DEFINITIONS • Qualified Person: • A person who has the training in avoiding the electrical hazards of working on or near exposed energized parts. And who is familiar with the construction and operation of the equipment and hazards involved with the job

  19. DEFINITIONS (Continued) • Unqualified Person: • A person who has little or no training with respect to avoiding the electrical hazards of working on or near exposed energized parts. And who is not familiar with the construction and operation of the equipment and hazards involved with the job.

  20. Voltage Range (Phase-to-Phase) Minimum Approach Distance 300 V and less Avoid Contact Over 300 V, not over 750 V 1 ft 0 in (30.5 cm) Over 750 V, not over 2 kV 1 ft 6 in (46.0 cm) Over 2 kV, not over 15 kV 2 ft 0 in (61.0 cm) Over 15 kV, not over 37 kV 3 ft 0 in (91.0 cm) Over 37 kV, not over 87.5 kV 3 ft 6 in (107.0 cm) Over 87.5 kV, not over 121 kV 4 ft 0 in (122.0 cm) Over 121 kV, not over 140 kV 4 ft 6 in (137.0 cm) APPROACH DISTANCES Approach Distances - Qualified Person: Note: This table applies to overhead lines but may be used to develop local guidelines

  21. Voltage Range (Phase-to-Phase) Minimum Approach Distance 50,000 V and less 10 ft 50,001 to 150,000 V 15 ft APPROACH DISTANCES (Continued) Approach Distances - Unqualified Person: Note: This table applies to overhead lines but may be used to develop local guidelines

  22. APPROACH DISTANCES (Continued) Approach Distances - Unqualified Person: ALTERNATIVE METHODS Where it is not feasible to comply with established approached distances alternative methods may be used as long as the operation is supervised by an authorized employee:

  23. APPROACH DISTANCES (Continued) Approach Distances - Unqualified Person: ALTERNATIVE METHODS 1. The energized parts must be insulated using blankets, line hose, or other such insulating materials and or; 2. Insulating barricades must be to physically prevent the worker from contacting the energized conductors and or; 3. The workers must be protected using rubber gloves, sleeves, flash suits, or other protective equipment.

  24. SELECTION OF WORK PRACTICES • Knockouts and Panel Fillers: Ensure knockouts and panel fillers are inplace to prevent accidental contact by unqualified personnel.

  25. SELECTION OF WORK PRACTICES (Continued) • Illumination: SOME TIPS TO CONSIDER Employees may not enter spaces containing exposed energized parts unless illumination is provided that enables he or she to perform the work safely. Employees may not reach blindly into areas which may contain energized parts.

  26. SELECTION OF WORK PRACTICES (Continued) • General: Safety-related work practices must be employed to prevent electric shock or other injuries resulting from either direct or indirect electrical contacts, when work is performed near or on equipment or circuits which are or may be energized. The specific safety-related work practices must be consistent with the nature and extent of the associated electrical hazards.

  27. SELECTION OF WORK PRACTICES (Continued) • Denergized Parts • Live parts must be de-energized before work is permitted on or near them, unless it can be demonstrated that de-energizing introduces additional or increased hazards or is infeasible due to equipment design or operational limitations. • Live parts that operate at less than 50 volts to ground need not be de-energized if there will be no increased exposure to electrical burns or to explosion due to electric arcs.

  28. SELECTION OF WORK PRACTICES (Continued) • Energized Parts • If the exposed live parts are not de-energized (i.e., for reasons of increased or additional hazards or infeasibility), other safety-related work practices must be used to protect employees who may be exposed to the electrical hazards involved. • Such work practices must protect employees against contact with energized circuit parts directly with any part of their body or indirectly through some other conductive object.

  29. SELECTION OF WORK PRACTICES (Continued) • Working On or Near Exposed Energized Parts • Only qualified persons may work on electric circuit parts or equipment that have not been de-energized. • Such persons must be capable of working safely on energized circuits and must be familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools.

  30. SELECTION OF WORK PRACTICES (Continued) • Overhead Lines • If work is performed near overhead lines, they must be de-energized and grounded, or other protective measures provided before work is started. • If the lines are to be de-energized, arrangements must be made with the person or organization that operates or controls them to de-energize and ground them. • All protective measures, must prevent employees from contacting lines directly with any body part or indirectly through conductive materials, tools, or equipment.

  31. SELECTION OF WORK PRACTICES (Continued) LOCKOUT TAGOUT OVERVIEW 29 CFR - 1910 - 147 29CFR - SAFETY AND HEALTH STANDARDS 1910 - GENERAL INDUSTRY 147 - LOCKOUT TAGOUT STANDARD

  32. SELECTION OF WORK PRACTICES (Continued) LOCKOUT TAGOUT OVERVIEW • TITLE - CONTROL OF HAZARDOUS ENERGY • SEPTEMBER 1, 1989 - FINAL RULE ISSUED • JANUARY 2, 1990 - FINAL RULE TOOK EFFECT

  33. DANGER LOCKED OUT DO NOT OPERATE This Lock/Tag may only be removed by NAME: _______________ DEPT : _______________ EXPECTED COMPLETION DATE: ________________ TIME: _________________ SELECTION OF WORK PRACTICES (Continued) LOCKOUT TAGOUT DEFINITIONS • Authorized Employee • The Person Who Locks or Tags OutMachines • To Perform Servicing or Maintenance. • Affected Employee • An Employee Whose Job Requires Him or Her To Operate or Use a • Machine or Piece of Equipment On Which Servicing or Maintenance • Is Being Performed.

  34. SELECTION OF WORK PRACTICES (Continued) • Lockout Tagout Operations • While any employee is exposed to contact with parts of fixed electric equipment or circuits which have been de-energized, the circuits energizing the parts must be locked out or tagged or both. • Fixed equipment refers to equipment fastened in place or connected by permanent wiring methods. • The employer must also maintain a written copy of the procedures.

  35. SELECTION OF WORK PRACTICES (Continued) • Application of Locks and Tags • A lock and a tag must be placed on each disconnecting means used to de-energize circuits and equipment on which work is to be performed. The lock must be securely attached. • Each tag must contain a statement prohibiting unauthorized operation and removal of the tag. • If a lock cannot be applied, or if the employer can demonstrate that tagging procedures will provide a level of safety equivalent to that obtained by the use of a lock, a tag may be used without a lock.

  36. SELECTION OF WORK PRACTICES (Continued) • Application of Locks and Tags A tag used without a lock, must be supplemented by at least one additional safety measure that provides a level of safety equivalent to that obtained by the use of a lock. Examples include: 1. Removal of an isolating circuit element 2. Blocking of a controlling switch 3. Opening of an extra disconnecting device

  37. SELECTION OF WORK PRACTICES (Continued) • Application of Locks and Tags A lock may be placed without a tag only under the following conditions: 1. Only one circuit or piece of equipment is deenergized, and 2. The lockout period does not extend past the work shift, and 3. Exposed employees are familiar with this procedure

  38. SELECTION OF WORK PRACTICES (Continued) • Verification of Denergized Condition 1. A qualified person must operate the equipment operating controls or otherwise verify that the equipment cannot be restarted. 2. A qualified person must use test equipment to test the circuit elements and electrical parts of equipment to which employees will be exposed and verify that the circuit elements and equipment parts are de-energized.

  39. SELECTION OF WORK PRACTICES (Continued) • Verification of Denergized Condition 3. Tests must determine if any energized condition exists as a result of inadvertently induced voltage or unrelated voltage back feed even though specific parts of the circuit have been de-energized and presumed to be safe. Note: If the circuit to be tested is over 600 volts, nominal, the test equipment must be checked for proper operation immediately before and immediately after this test.

  40. SELECTION OF WORK PRACTICES (Continued) • Reenergizing Equipment The following requirements must be met, in the order given, before circuits or equipment are reenergized, even temporarily. 1. A qualified person must conduct tests and visual inspections, as necessary, to verify that all tools, electrical jumpers, shorts, grounds, and other such devices have been removed. 2. Exposed employees must be warned to stay clear of circuits and equipment during re-energization.

  41. SELECTION OF WORK PRACTICES (Continued) • Reenergizing Equipment 3. Each lock and tag must be removed by the employee who applied it or under his or her direct supervision. If this employee is absent, then the lock or tag may be removed by a designated qualified person provided that: • The employer ensures that the employee who applied the lock or tag is not available at the workplace, and. • The employee is aware that the lock or tag has been removed before he or she resumes work. • A visual determination ensures all employees are clear.

  42. SELECTION OF WORK PRACTICES (Continued) CONFINED SPACE OVERVIEW 29 CFR - 1910 - 146 29CFR - SAFETY AND HEALTH STANDARDS 1910 - GENERAL INDUSTRY 146 - CONFINED SPACES

  43. SELECTION OF WORK PRACTICES (Continued) • Confined Spaces: SOME TIPS TO CONSIDER Confined spaces must be assessed and strict guidelines followed. Energized parts must be protected from accidental contact. Doors, hinged panels and the like must be secured to prevent them from contacting workers or live parts.

  44. VEHICULAR AND MECHANICAL EQUIPMENT Elevated Equipment: Vehicles or mechanical equipment capable of having elevated parts near energized overhead lines must be operated so that a clearance of 10 ft. (305 cm) is maintained. If the voltage is higher than 50kV, the clearance must be increased 4 in. (10 cm) for every 10kV over that voltage.

  45. VEHICULAR AND MECHANICAL EQUIPMENT (Continued) Elevated Equipment: Clearance may be reduced if: 1. If the vehicle is in transit with its structure lowered, the clearance may be reduced to 4 ft. (122 cm). If the voltage is higher than 50kV, the clearance must be increased 4 in. (10 cm) for every 10kV over that voltage.

  46. VEHICULAR AND MECHANICAL EQUIPMENT (Continued) Elevated Equipment: Clearance may be reduced if: 2. If insulating barriers are installed to prevent contact with the lines, and if the barriers are rated for the voltage of the line being guarded and are not a part of or an attachment to the vehicle or its raised structure, the clearance may be reduced to a distance within the designed working dimensions of the insulating barrier.

  47. VEHICULAR AND MECHANICAL EQUIPMENT (Continued) Clearance May be reduced if: 3. The equipment is an aerial lift insulated for the voltage involved, and if the work is performed by a qualified person, the clearance (between the uninsulated portion of the aerial lift and the power line) may be reduced to the distance given in 29 CFR 1910.334 S-5 Below. Voltage Range (Phase-to-Phase) Minimum Approach Distance 300 V and less Avoid Contact Over 300 V, not over 750 V 1 ft 0 in (30.5 cm) Over 750 V, not over 2 kV 1 ft 6 in (46.0 cm) Over 2 kV, not over 15 kV 2 ft 0 in (61.0 cm) Over 15 kV, not over 37 kV 3 ft 0 in (91.0 cm) Over 37 kV, not over 87.5 kV 3 ft 6 in (107.0 cm) Over 87.5 kV, not over 121 kV 4 ft 0 in (122.0 cm) Over 121 kV, not over 140 kV 4 ft 6 in (137.0 cm)

  48. VEHICULAR AND MECHANICAL EQUIPMENT (Continued) Employees On The Ground: Employees standing on the ground may not contact the vehicle or mechanical equipment or any of its attachments, unless: 1. The employee is using protective equipment rated for the voltage; or 2. The equipment is located so that no uninsulated part of its structure that provides a conductive path can come closer than the approach distances outlined in to the line than permitted in to the distance given in 29 CFR 1910.334 Table S-5.

  49. VEHICULAR AND MECHANICAL EQUIPMENT (Continued) Employees On The Ground: If any vehicle or mechanical equipment capable of having parts of its structure elevated near energized overhead lines is intentionally grounded, employees working on the ground near the point of grounding may not stand at the grounding location whenever there is a possibility of overhead line contact. Additional precautions, such as the use of barricades or insulation, must be taken to protect employees from hazardous ground potentials, depending on earth resistivity and fault currents, which can develop within the first few feet or more outward from the grounding point.

  50. PORTABLE LADDERS Portable Ladders: Portable ladders must have nonconductive siderails if they are used where the employee or the ladder could contact exposed energized parts.

More Related