1 / 8

Fluid Dynamics and Heat Transfer in a Hartmann Flow

Fluid Dynamics and Heat Transfer in a Hartmann Flow. RPI Master’s Project Proposal Timothy DePuy – 9/28/2010. Magnetohydrodynamics Applications. Hartmann flow is a specific type of flow in the field of Magnetohydrodynamics Specific Applications Propulsion

huey
Download Presentation

Fluid Dynamics and Heat Transfer in a Hartmann Flow

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Fluid Dynamics and Heat Transfer in a Hartmann Flow RPI Master’s Project Proposal Timothy DePuy– 9/28/2010

  2. Magnetohydrodynamics Applications • Hartmann flow is a specific type of flow in the field of Magnetohydrodynamics Specific Applications • Propulsion • Plasma confinement (fusion reactors) • Liquid Metal Pumping/Breaking/Mixing • Fission (sodium reactors) • Metalolergy • Microfluidic Pumping

  3. Hartmann flow 2h Pi y Po x • Hartmann flow is the flow of a conductive liquid in between two parallel plates exposed to a transverse magnetic field • The plates are infinite in the x and z directions • A Lorentz force can be calculated as a result of the flow through the magnetic and electric fields B E

  4. Analysis Using ComsolMultiphysics • ComsolMultiphysics Modeling software will be used to determine the magnetic, hydrodynamic, and heat transfer solutions for the Hartmann Flow • Obtain Lorentz Force from solution to Maxwell Equations • Input Lorentz Force into incompressible steady state fluid flow solver • Input flow solution into heat transfer solver • Solutions will be obtained for both the laminar and turbulent flows • Solutions will be compared to analytical solutions from various references

  5. 2h y To Ti Boundary Conditions for the Hydrodynamic and Heat Transfer Analyses Flow Solution x • A pressure gradient and Lorentz force solution will be applied to the fluid, No-Slip conditions will be applied at the boundaries • A constant wall temperature and inlet temperature will be assumed. The heat transfer rate to the wall will be calculated 2h y Po Lorentz Force F(y) Pi x Constant Tw < Ti

  6. Expected Results • A “flatter” flow distribution is expected, with increased velocities closer to the walls, and decreased velocities in the center of the channel • Heat transfer solution is unknown- higher velocities at the wall may increase heat transfer however lower maximum velocities will reduce mixing

  7. Increasing Levels of Complexity • Steady State Laminar Flow • Magnetic Solution • Hydrodynamic Solution • Heat transfer Solution • Steady State Turbulent Flow • Magnetic Solution • Hydrodynamic Solution • Heat transfer Solution • Transient Flow • Heat Generation Due to Magnetic /Electric Fields (Joule Heating)

  8. Picture References • http://en.wikipedia.org/wiki/Magnetohydrodynamic_drive • http://www.sfc-fluidics.com/technology-in-development/mpump.php • http://www.highstrangeness.tv/6170-coconut-futures-and-thermonuclear-fusion-power.html • ElmārsBlūms, Yu. A. Mikhailov and R. Ozols, Heat and Mass Transfer in MHD Flows, World Scientific Publishing, 1987.

More Related