1 / 75

Kansas Small Business Environmental Assistance Program - Air Quality Workshop

Join us for a workshop on air regulation, potential to emit, and limiting emissions. Learn how to calculate your PTE and get free technical assistance for small businesses.

hopsonj
Download Presentation

Kansas Small Business Environmental Assistance Program - Air Quality Workshop

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Air Quality 102 Sponsored by Kansas Small Business Environmental Assistance Program 1-800-578-8898

  2. Agenda • Welcome and introductions (questions) • Air regulation overview • Potential to emit (PTE) • Limiting PTE • Networking lunch • Calculate your PTE

  3. K-State’s Pollution Prevention Institute (PPI) • PPI staff operate SBEAP in partnership with KDHE. • PPI services are • Multimedia (air, waste, water) • Free to small- and medium- sized businesses • Confidential • Non-regulatory • PPI special projects enhance SBEAP services.

  4. Small Business Environmental Assistance Program • Provides air-focused technical assistance to Kansas small- and medium-sized businesses • Environmental regulatory compliance • Emissions reduction and pollution prevention • Permitting and reporting requirements • All states have a similar program.

  5. Small Business Environmental Assistance Program • SBEAP services are provided via • Environmental hotline (800-578-8898) • On-site visits • Targeted regulatory or industry-specific workshops • Publications (hard copy or electronic) • Newsletters: AIRlines, EnviroLines • Fact sheets, manuals • E-tips • Web-based resources and training • www.sbeap.org

  6. Questions or comments? Environmental Hotline 800-578-8898 www.sbeap.org

  7. Clean Air History 1273 – King Edward I bans sea coal in London 1881 – Chicago’s first smoke-control law 1945 – Pittsburgh smoke-control program 1947 – Los Angeles Air Pollution Control District establishes smoke and SO2 regulations 1948-1954 – several smog-related deaths 1955 - Congress passes the Air Pollution Control Act (first commitment of federal funds - $5M) 1963 Clean Air Act 1970 Clean Air Act Amendments (EPA formed) 1990 Clean Air Act Amendments of 1990

  8. London fog incident of 1952

  9. CAA 1970 • Risk-based standards • SOx • NOx • CO • PM10 • Lead • Ozone • Technology-based standards for point sources

  10. CAAA 1990 • Contains 11 titles, including – Title I: Ambient air quality standards Title III: Hazardous air pollutants (HAPs) Title V: Operating permits

  11. Kansas Air Quality RegulationsKAR 28-19-1 -- 801 • The Kansas Air Quality Act (KAQA) implements elements of the 1990 Clean Air Act Amendments. • It is administered by the Kansas Department of Health and Environment (KDHE) Bureau of Air and Radiation (BAR).

  12. What must you evaluate? • KAQA applicability and compliance • Existing sources that are not permitted • Proposed sources • Existing sources that are permitted, when modifying or adding new equipment

  13. Kansas air operating permits • Construction permits or approvals (registrations) • Class I operating permits (true major sources) • Class II operating permits (potential major, actual area sources; limits PTE) • Class III or registrations – no longer in effect

  14. Major source Stationary source with potential emissions of – • 100 tons/yr or more of regulated pollutant (e.g., NOx, SOx, PM10, VOC, CO) • 10 tons/yr of any single HAP • 25 tons/yr of any combination of HAPs

  15. Potential to emit (PTE) This is the maximum design capacity of a stationary source to emit a pollutant under its physical and operational design. Any physical or operational limitation shall be treated as part of the design – • Control equipment • Hours of operation • Amount of material • Stored • Combusted • Processed

  16. PTE assumptions • 24-hour operation, 365 days per year • Operate at maximum capacity • No pollution control devices or practices • “Bottlenecks” can limit the PTE

  17. Quiz Question If your facility only operates one shift, why calculate emissions as though you operate 24/7?

  18. Quiz Answer Facilities are regulated based on their design – not their actual hours of operation. Production levels could change, and emissions would increase within existing facility.

  19. Emission source – any machine, equipment, device, or other article or operation that directly or indirectly releases contaminants into the outdoor atmosphere. Emission unit – any part or activity of a stationary source that emits or would have the potential to emit any regulated pollutant or any pollutant listed under 42 U.S.C. 7412(b) of the federal Clean Air Act.

  20. What are emissions? • Stack emissions • Fugitive emissions (if a federally designated fugitive emission source) • Other emissions

  21. Identify each emissions unit • A unit is an activity that emits or has the potential to emit. • Emission units do not have to be connected to a stack or vent. • The entire facility can be viewed as an emissions unit.

  22. Bleed valves Compressors Degassing (line, pump, vessel) Steam traps Process vents Pressure-relief Cooling towers Loading operations Solid wastes Storm water runoff Wastewater collection and treatment Transfer operations Frequently overlooked emission sources

  23. Emissions from activities • Conveyors • Tank truck loading and unloading • Valves and vents • Wastewater treatment plant emissions • Material storage and transfer • Evaporation • Wind erosion • Haul roads

  24. Other emissions to consider • Degreasing tanks • Welding activities • Pumps • Painting • Cleanup

  25. What to leave outCategories of Exempt Activities • Fuel use • Upkeep and maintenance • Production operations • Finishing operations • Storage tanks • Wastewater collection and treatment • Cleaning operations • Residential activities • Recreational activities • Health-care activities • Miscellaneous

  26. Quiz Question Do you calculate emissions from welding operations?

  27. Quiz Answer Only if HAPs are emitted as a result of the welding.

  28. PTE calculation methods • Material balance • Emission factor • Stack tests • Other approved method

  29. Steps for calculating PTE • Identify each emission unit • List all possible pollutants • Quantify emissions (tons/year) • Material balance • Emission factors

  30. List all possible pollutants • Nitrogen oxides (NOx) • Sulfur oxides (SOx) • Carbon monoxide (CO) • Volatile organic compounds (VOCs) • Particulate matter 10 microns or less (PM10) • Hazardous air pollutants (HAPs)

  31. Quantify emissions • Material balance • Emission factors • EPA’s AP42 factors • Trade organization studies • Performance tests

  32. Fuel consumption Emissions from combustion can be calculated based on the fuel and equipment used. • Rated heat capacity can be used. • Maximum rated fuel consumption can be used.

  33. Material balance Product in = product out (assumes constant inventory) Example: solvent cleaning Solvent purchased = emissions Material balance can be applied to individual unit, activity, or entire source process.

  34. Air construction permits(Preconstruction approvals) • Prevention of Significant Deterioration (PSD) permits • Significance levels • 100 ton/yr PTE for listed sources • 250 ton/yr PTE for all other sources • Construction permits KAR 28-19-300(a) • Construction approvals KAR 28-19-300(b)

  35. Construction permits – when? If PTE threshold is met because of – • New construction • Modification of existing emission unit • Change in method of operation • Emissions unit is major HAP source or incinerator

  36. What ISN’T a modification? • Routine maintenance, repair, or replacement • Switching fuel – specific cases • Increase in production rate or hours – as long as not prohibited by permit • Change in ownership

  37. Construction approvals (registrations)– when? • Emissions exceed thresholds • Emissions unit is subject to • NSPS • NESHAP/MACT

  38. Class I permits • Combines all air quality requirements into single permit (corrects and modifies previous permits and approvals) • Requires sources to review and correct air quality requirements • Requires annual air emission inventory submissions

  39. Class I permits (cont.) • Establishes recordkeeping, monitoring, and testing requirements • Establishes semi-annual reporting and annual compliance certification • Federally enforceable

  40. Class I permit – who needs it? • Major source • Affected source • Subject to New Source Performance Standard (NSPS) • Subject to 112(r), prevention of accidental releases • Designated by the secretary

  41. Quiz Question I think our facility needs a permit and I don’t think we have one – but I’m not sure. What do I do?

  42. Quiz Answer Work with us and KDHE. KDHE will work with you but if legally required to impose a fine, they will have to do it. Still, better to get it resolved right away.

  43. Class I renewals • KDHE has a special form for Class I renewal applications. • New forms may be required if operations have significant changes. • Submit application six to18 months prior to expiration of current permit. • Contact KDHE for more information.

  44. Limiting PTE Any physical or operational limitation on the capacity of the source to emit a pollutant, including air pollution control equipment and restrictions on hours of operation or on the type or amount of material combusted, stored, or processed, shall be treated as part of the design if the limitation or effect it would have on emissions is federally enforceable.

  45. Common methods of reducing PTE • Pollution prevention • Limit process rates • Limit hours of operation • Limit amount of material processed or combusted • Add pollution control equipment • Emission limit required by a regulation • Combination of these

  46. Regulatory limits • Regulations that are part of the state implementation plan (SIP) – Class II permits • New Source Performance Standards (NSPS) • National Emission Standards for Hazardous Air Pollutants (NESHAP/MACT) • Other federal regulations

  47. Class II (synthetic minor) permits • General Class II permits • General – rock crushers • Permit-by-rule • Reciprocating engines • Organic solvent evaporative sources • Hot-mix asphalt • 50% actual

  48. Class II permit emission levelsActual emissions (blue), potential emissions (red)

More Related