1 / 26

Chapter 6: Real-Time Digital Time-Varying Harmonics Modeling and Simulation Techniques

Organized by Task Force on Harmonics Modeling & Simulation Adapted and Presented by Paulo F Ribeiro AMSC May 28-29, 2008. Chapter 6: Real-Time Digital Time-Varying Harmonics Modeling and Simulation Techniques.

herbst
Download Presentation

Chapter 6: Real-Time Digital Time-Varying Harmonics Modeling and Simulation Techniques

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Organized by Task Force on Harmonics Modeling & Simulation Adapted and Presented by Paulo F Ribeiro AMSC May 28-29, 2008 Chapter 6: Real-Time Digital Time-Varying Harmonics Modeling and Simulation Techniques Contributors: L-F. Pak, V. Dinavahi, G. Chang, M. Steurer, S. Suryanarayanan, P. Ribeiro

  2. Need for Sophisticated Tools for Power Quality (PQ) Studies • Proliferation of nonlinear and time-varying loads has led to significant power quality concerns. • Traditionally, time-varying harmonics were studies using statistical and probabilistic methods for periodic harmonics. • Cannot describe random characteristics • Cannot capture the reality of physical phenomena. • A time-dependent spectrum is needed to compute the local power-frequency distribution at each instant. • Significant advances in equipment for PQ monitoring, waveform generation, disturbance detection, and mitigation. • Digital signal processing is widely used. • Sophisticated power electronic controllers are used for PQ mitigation. • Need for testing and validation of such equipment. • Real-time digital simulation as an advanced tool for PQ analysis and mitigation.

  3. Real-Time Harmonic Modeling and Simulation Techniques • Wave Digital Filters • Discrete Wavelet Transform • Real-Time Electromagnetic Transient Network Solution • Real-Time Digital Simulators • RTDS • PC-Cluster Based Simulators • HYPERSIM • DSPACE

  4. Wave Digital Filters • Digital Signal Processing tool that transforms analog networks into topologically equivalent digital filters • Synthesis is based on wave network characterization • Designed to attain low-sensitivity structures to quantization errors in digital filter coefficients • Powerful technique for simulating power system harmonics and transients

  5. Discrete Wavelet Transform • Time-Frequency representation of time varying signals. • Wavelet analysis starts by adopting a prototype function. Time Analysis is done with a contracted high-frequency prototype. Frequency analysis is done using a dilated low- frequency prototype. • Operator representation theory is used to model electrical componenets in discrete wavelet domain

  6. PC-Cluster Based Real-Time Digital Simulator • Real-Time eXperimental LABoratory (RTX-LAB) at the University of Alberta.

  7. Features of the RTX-LAB Simulator • Fully Flexible and scalable • Fast FPGA based analog and digital I/O and high intra-node communication speed • Varity of synchronization options • Compatible with MATLAB/SIMULINK and other programming languages

  8. Hardware Architecture of the RTX-LAB Simulator • Two types of computers- Targets and Hosts • Targets are dual CPU based 3.0 GHZ Xeon, work as the main simulation engine and facilitates FPGA based I/Os • Hosts are 3.00 GHZ Pentium IV, used for model development, compilation and loading of the model to the cluster

  9. Software Architecture of the RTX-LAB Simulator • Target OS- RedHawkLinux • Host OS- Windows XP • Model Development- MATLAB/SIMULINK Other programming Languages C, C++

  10. Communication Links in the RTX-LAB Simulator • I/O signals from real-hardware are connected through FPGA based I/Os • Xilinx Virtex-II Pro is used 100 MHZ operation speed • InfiniBand Link Maximum Throughput- 10Gbps • Shared Memory bus speed – 2.67Gbps • Signal Wire Link Data Transfer rate-1.2Gbps • Gigabit Ethernet link Transfer Rate- Up to 1Gbps

  11. Subsystems and Synchronization in the RTX-LAB Simulator

  12. Case Study 1: Time-Varying Harmonic Analysis on the RTX-LAB Real-Time Digital Simulator Single-line Diagram of the Arc Furnace Installation

  13. Case Study 1: Time-Varying Harmonic Analysis on the RTX-LAB Real-Time Digital Simulator Schematic of the Arc Furnace Model

  14. Case Study 1: Time-Varying Harmonic Analysis on the RTX-LAB Real-Time Digital Simulator Voltage and Current for the Arc Furnace

  15. Case Study 1: Time-Varying Harmonic Analysis on the RTX-LAB Real-Time Digital Simulator Voltage at the Primary Winding of the MV/LV Transformer

  16. Case Study 1: Time-Varying Harmonic Analysis on the RTX-LAB Real-Time Digital Simulator Current in the Primary Winding of the MV/LV Transformer

  17. RTDS at CAPS • Provides time domain solution in real time with typical time step sizes around 50 μs using the Dommel (EMTP) algorithm • Features dual time step (<2 μs) capability for PE simulations • Allows up to 54 electrical nodes per rack, but subsystems can be connected through cross-rack elements (transmission lines, etc.) • Large library of power system and control component models (like EMTDC) • > 350 parallel DSPs • > 2500 analog outputs and over 200 digital inputs and outputs RPC – Network Solution IRC – Inter-rack Communication WIF – Workstation Interface 3PC – Controls, system dynamics GPC – Network solution, fast-switching converters

  18. 14 Rack RTDS Installation at CAPS • Largest RT simulator installation in any university worldwide • Systems of up to 250 three-phase buses • Sufficient high-speed I/O to enable realistic HIL and PHIL experiments

  19. (Controller) hardware in loop (HIL) and power hardware in loop PHIL Simulated rest of system

  20. Case Study 2: Power Quality Sensitivity Study of a Controller on the RTDS Schematic of the Industrial Distribution System and Rectifier Load

  21. Case Study 2: Power Quality Sensitivity Study of a Controller on the RTDS Single-phase Voltage Sag (40% reduction, no phase shift) and its Impact on Rectifier DC Output

  22. Case Study 2: Power Quality Sensitivity Study of a Controller on the RTDS Phase-Shifted Single-phase Voltage Sag (40% reduction) and its Impact on Rectifier DC Output

  23. Case Study 3: Harmonic Distortion on the RTDSShipboard Power System Voltage (kV)

  24. Case Study 4: A HIL Simulation for Studying the Transient Behavior of Wind DG

  25. Case Study 4: A HIL Simulation for Studying the Transient Behavior of Wind DG

  26. Conclusions • With rising number of time-varying and nonlinear loads sophisticated harmonics modeling and simulation tools are needed. • A combination of fast topological methods and powerful real-time simulators can overcome limitations of off-line simulation tools. • A general review of current off-line harmonic modeling and simulation tools is presented. • Currently available real-time simulation techniques are discussed. • Two real-time case studies: arc furnace modeling and power quality sensitivity of a controller, are presented.

More Related