1 / 19

NETWORKING MEDIA

NETWORKING MEDIA. Shielded twisted-pair - 2 pair, 150 ohm unshielded-twisted pair - 4 pair, 100 ohm fiber optic cable - 2 fibers coaxial cable - (not recommended). Shielded Twisted Pair Provides resistance to EMI and radio frequency Cancellation and twisting of wires, shielding

hellens
Download Presentation

NETWORKING MEDIA

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NETWORKING MEDIA • Shielded twisted-pair - 2 pair, 150 ohm • unshielded-twisted pair - 4 pair, 100 ohm • fiber optic cable - 2 fibers • coaxial cable - (not recommended)

  2. Shielded Twisted Pair Provides resistance to EMI and radio frequency Cancellation and twisting of wires, shielding More expensive Cable length 100m Unshielded twisted-pair relies on cancellation effect number of twists varies Less expensive Cable length 100m Fastest copper based media today Twisted Pair Cabling

  3. COAXIAL CABLE • Copper conductor in center • Flexible insulation • Metallic foil or copper braid acts as second wire in circuit • Max. length 500m • Thicker than Twisted pair, more difficult to work with

  4. FIBER OPTIC CABLE • Not susceptible to EMI • Higher data rates than any other media • Each optical fiber is surrounded by layers of plastic such as Kevlar, and an outer jacket • Max. cable length up to 2km • Most expensive

  5. TIA/EIA STANDARDS • Horizontal cabling • telecommunications closets • backbone cabling • equipment rooms • work areas • entrance facilities

  6. Cabling • Crossover Cable - used to connect one device to another • Straight through - used to connect to hub or patch panel • Rollover or console cable - used to connect a PC to the router for purposes of accessing the router

  7. 10BASE-T • Cat 5 twisted pair • Terminated with RJ-45 • Layer 1 device • Carries bits

  8. Patch Panel • Groups of Rj-45 (12, 24, 48) PORTS • Rack mounted • Front sides RJ-45 jacks • Back sides punch-down Blocks • Layer 1 device

  9. Repeater • Regenerates and retime signals • Enables cables to extend farther to reach longer distances • Deal with packets at bit level (1) • Increase number of nodes that can be connected to a network • Cannot filter traffic

  10. Multiport Repeaters (Hubs) • Regenerate, amplify and retime signals • Deal only with bits • Layer 1 device

  11. COLLISIONS • If more than one node attempts to transmit at the same time • Packets destroyed, bit by bit • Two devices trying to occupy the same medium (wire) at the same time

  12. COLLISION DOMAIN • Repeaters and hubs extend the collision domain • Ethernet rule of thumb 5-4-3-2-1 rule. Five sections of network, four repeaters or hubs, three sections of the network are mixing segments, two sections are link segments, and one large collision domain

  13. SEGMENTATION • Reduces size of collision domain • Networking device used are bridges, switches and routers • Eliminate unnecessary traffic on busy network by dividing into segments and filtering traffic based on station address

  14. Bus Topology • All nodes connected directly to one line • Wired to a common wire • Disadvantage - break in cable disconnects host from each other

  15. RING TOPOLOGY • Single closed ring consisting of nodes and links • Connected to only two adjacent nodes • Each station must pass info to adjacent station

  16. DUAL RING • Two concentric rings, each linked only to its adjacent ring neighbor, not connected • Each network device is part of two independent ring topologies • Acts like two independent rings, only one at a time is used.

  17. STAR TOPOLOGY • Has a central node with all links radiating from it • Allows all other nodes to communicate with each other • If central node fails, whole network is disconnected. • Info goes through one device

  18. EXTENDED START TOPOLOGY • Repeats a star topology, except each node that links to the central node is the center of another star • Has a core star topology • Each end node of core topology acts as the center of its own star topology • Keeps wiring run shorter • Hierarchical, info encouraged to stay local

  19. COMPLETE (MESH) TOPOLOGY • Every node is physically connected to each other node • Information can flow if one link goes down • Disadvantage is for anything more than a small number of nodes the amount of media is overwhelming

More Related