1 / 13

POWER ELECTRONICS

بسم الله الرحمن الرحيم. The Islamic University of Gaza Faculty of Engineering Electrical Engineering Department. POWER ELECTRONICS . EELE 5450 — Summer 2012. Instructor: Eng. Jalal Al Roumy. Lecture 18. HALF-BRIDGE WITH AN R-L LOAD.

gyala
Download Presentation

POWER ELECTRONICS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. بسم الله الرحمن الرحيم The Islamic University of Gaza Faculty of Engineering Electrical Engineering Department POWER ELECTRONICS EELE 5450— Summer 2012 Instructor: Eng. Jalal Al Roumy Lecture 18

  2. HALF-BRIDGE WITH AN R-L LOAD

  3. HALF-BRIDGE WITH AN R-L LOAD Assuming that Io is established, the transient has disappeared and load current waveform is symmetrical

  4. HALF-BRIDGE WITH AN R-L LOAD The s-domain circuit with Q1 switched

  5. HALF-BRIDGE WITH AN R-L LOAD The s-domain circuit with Q1 switched

  6. HALF-BRIDGE WITH AN R-L LOAD

  7. HALF-BRIDGE WITH AN R-L LOAD

  8. HALF-BRIDGE WITH AN R-L LOAD Example

  9. HALF-BRIDGE WITH AN R-L LOAD

  10. FULL-WAVE BRIDGE INVERTER If the load is purely resistive, the feedback diodes are not required.

  11. FULL-WAVE BRIDGE INVERTER Q1 and Q3 are turned on for the positive half-cycle, Q2 and Q4 for the negative half-cycle. The load voltage value is twice that of the half-bridge, i.e. for ideal switches the full battery voltage appears across the load. The rms load current is twice that of the half-bridge, and the load power is increased by a factor of 4.

  12. FULL-WAVE BRIDGE INVERTER For analysis of the full-bridge, with an R-L load, equations (4.5)-(4.7) are used with the full battery voltage instead of the centre-tapped value.

  13. End of Lecture

More Related