Loading in 2 Seconds...
Loading in 2 Seconds...
Bathroom wall tiles suppliers bring this post to let you know the facts about interlocking floating vinyl tiles and how to install them on the floor.
as Revolutionary Product?
You have heard about ceramic tiles, stone tiles, marble tiles, pebble tiles, and alike. But
how many times you heard people talking about interlocking vinyl tiles? Bathroom wall
tilessuppliers bring this post to let you know the facts about interlocking floating vinyl tiles
and how to install them on the floor.
A vinyl or resilient tile floor has longer lifespan and can cover old vinyl or ceramic floor
tile without removals. It’s a revolutionary product because you don’t need any
professional to assist you in installing them. They are very convenient to install and take
lesser time for setting. While most vinyl tiles need adhesive to stick on subfloor, floating
tiles have interlocking technology. The interlocking setting allows you to attach one tile
to another with speed.
Interlocking Vinyl Tiles Installation
Installing interlocking vinyl tiles is not a big job as you don’t need any professional
assistance or skills for completing this job. Just follow these simple steps to get this work
Set the vinyl tiles inside room 48 hours before installation. This step will help them
to acclimate to the temperature. Make sure you have cleaned and wiped the
surface well and check for smooth and flat surface.
Take right measurement of the wall on which you want to install the tile. Draw a
chalk line over floor from the center point of the wall to the opposite wall.
Lay your vinyl tiles along the walls without connecting them. See and set the tile
over the line you drawn and the next tiles evenly outward on each side. Mark the
tiles to be cut at the edges with chalk or pencil.
Lay a straightedge on the mark and using utility knife, score the tile along the line.
Double check the fit on the edge tiles.
Start installing the tiles from the left corner. Place 1/8” spacers along both walls as
it will keep the tiles slightly off the walls.
Lay the first tile against the spacers. Put the next tile at 10-20 degree angle against
the first. Slide the tile you are holding into the tile lying on the floor. Lock the tiles
Continue locking the tiles and use spacers along the wall for straight alignment.
You will require measuring tape, chalk line, straightedge, spacers, and utility knife for
this DIY glueless vinyl floor tile installation project. The range of vinyl tiles for floor is
available at the tile store. You can anytime look forward for products and ask as many
wall tiles dealers as you want.
This article was shared by Bathroom wall tiles India suppliers to acknowledge you
about vinyl floor tiles and its benefits. If you have any question regarding the product,
make comments below.
Source:Why Interlocking Foam Tiles Considered as Revolutionary Product?