1 / 24

Class 6 Toxic Substances Learning Tool T-1020

Class 6 Toxic Substances Learning Tool T-1020. This work has been produced by DGL (Aust) Pty Ltd

garron
Download Presentation

Class 6 Toxic Substances Learning Tool T-1020

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Class 6 Toxic Substances Learning Tool T-1020 This work has been produced by DGL (Aust) Pty Ltd This Learner’s Tool is about the skills and knowledge required to store and warehouse Class 6 Toxic Substances at DGL (Aust) facilities. This includes operational requirements for the safe and efficient control of all functions and effective management of hazardous situations.

  2. Before you get started • It is important that you complete all sections in this learning tool as it has been designed so that • You can abide by the procedures of our organization. • You can apply what you have learnt in this package in your day to day activities • This Learning Tool is designed to be relevant only to DGL (Aust) Pty Ltd employees and only applied whilst employed with DGL (Aust) Pty Ltd • You may have already acquired knowledge in the area identified in this package as you may have completed some specialized training. Or you may have been working within the industry for some time. Should you identify any improvement opportunities in the information contained in this package or have difficulties completing the package please contact National Training and Compliance Manager DGL (Aust) Pty Ltd PO BOX 1594 EAGLE FARM QLD 4009 Ph 07 3868 1001 Fax 07 3868 1055

  3. Definition of a Class 6 • Class 6 is divided into two divisions as follows: • (a) Division 6.1 Toxic substances • These are substances liable either to cause death or serious injury or to harm human health if swallowed or inhaled or by skin contact; • (b) Division 6.2 Infectious substances • These are substances known or reasonably expected to contain pathogens. Pathogens are defined as micro-organisms (including bacteria, viruses, rickettsiae, parasites, fungi) and other agents such as prions, which can cause disease in humans or animals. • (Note 1) • Note (1) Source the Australian Dangerous Goods Code 7th Edition page 91

  4. Properties of Class 6 • Division 6.1 - Toxic Substances • LD50 (median lethal dose) for acute oral toxicity is the statistically derived single dose of a substance that can be expected to cause death within 14 days in 50 per cent of young adult albino rats when administered by the oral route. The LD50 value is expressed in terms of mass of test substance per mass of test animal (mg/kg). • LD50 for acute dermal toxicity is that dose of the substance which, administered by continuous contact for 24 hours with the bare skin of albino rabbits, is most likely to cause death within 14 days in one half of the animals tested. The number of animals tested must be sufficient to give a statistically significant result and be in conformity with good pharmacological practice. The result is expressed in milligrams per kg body mass. • LC50 for acute toxicity on inhalation is that concentration of vapour, mist or dust which, administered by continuous inhalation to both male and female young adult albino rats for one hour, is most likely to cause death within 14 days in one half of the animals tested. A solid substance must be tested if at least 10% (by mass) of its total mass is likely to be dust in a respirable range, e.g. the aerodynamic diameter of that particle-fraction is 10 microns or less. A liquid substance must be tested if a mist is likely to be generated in a leakage of the transport containment. Both for solid and liquid substances more than 90% (by mass) of a specimen prepared for inhalation toxicity must be in the respirable range as defined above. The result is expressed in milligrams per litre of air for dusts and mists or in millilitres per cubic metre of air (parts per million) for vapours.

  5. Properties of Class 6 continued • Division 6.2 – Infectious Substances • Biological products are those products derived from living organisms which are manufactured and distributed in accordance with the requirements of appropriate national authorities, which may have special licensing requirements, and are used either for prevention, treatment, or diagnosis of disease in humans or animals, or for development, experimental or investigational purposes related thereto. They include, but are not limited to, finished or unfinished products such as vaccines. • Cultures (laboratory stocks) are the result of a process by which pathogens are intentionally propagated. This definition does not include human or animal patient specimens as defined in Patient specimens • Patient specimens are human or animal materials, collected directly from humans or animals, including, but not limited to, excreta, secreta, blood and its components, tissue and tissue fluid swabs, and body parts being transported for purposes such as research, diagnosis, investigational activities, disease treatment and prevention. • Genetically modified micro-organisms and organisms are micro-organisms and organisms in which genetic material has been purposely altered through genetic engineering in a way that does not occur naturally. • Medical or clinical wastes are wastes derived from the medical treatment of animals or humans or from bio-research. • (Note 1). • Note (1) Source the Australian Dangerous Goods Code 7th Edition page 91 & 97

  6. Class 6 Label for Toxic Substances (Note 1). Note (1) Source the Australian Dangerous Goods Code 7th Edition page 427

  7. Classification of Class 6 Products • Substances of Division 6.1, including pesticides, are allocated among the three packing groups according to their degree of toxic hazard in transport as follows: • (a) Packing group I: Substances and preparations presenting a very severe toxicity risk; • (b) Packing group II: Substances and preparations presenting a serious toxicity risk; • (c) Packing group III: Substances and preparations presenting a relatively low toxicity risk. • Infectious substances 6.2 are divided into the following categories: • Category A: An infectious substance which is transported in a form that, when exposure to it occurs, is capable of causing permanent disability, life-threatening or fatal disease in otherwise healthy humans or animals. • (a) Infectious substances meeting these criteria which cause disease in humans or both in humans and animals must be assigned to UN 2814. Infectious substances which cause disease only in animals must be assigned to UN 2900. • (b) Assignment to UN 2814 or UN 2900 must be based on the known medical history and symptoms of the source human or animal, endemic local conditions, or professional judgement concerning individual circumstances of the source human or animal. • Category B: An infectious substance which does not meet the criteria for inclusion in Category A. Infectious substances in Category B must be assigned to UN 3373, except for medical or clinical wastes containing infectious substances in Category B (Note 1) • Note (1) Source the Australian Dangerous Goods Code 7th Edition page 92 & 97

  8. Storage • Package stores for toxic substances, shall comply with the following general requirements, as appropriate: • (a) Unless otherwise approved, stores shall be located on a floor that has immediate access for emergency personnel. • (b) At least two means of access shall be provided to stores which have a floor area exceeding 25 m2. • (c) Stores shall be designed, constructed and operated in a manner that will allow the housekeeping requirements to be carried out effectively. Provision shall be made to allow for the washing down of the floor area. • (d) Stores shall have wall and roof sheeting and main structural members constructed from materials which are non-combustible and resistant to attack by the material stored. • (e) Lighting shall comply with • (i) lighting, of sufficient luminance as to enable a person to easily read all markings on packages, signs, instruments and other necessary items, shall be available in areas where people are working; • (ii) interior lighting shall be of at least the luminance specified in AS 1680.2.0; and • (iii) sufficient lighting shall be available on the internal roads which lead to areas, rooms or buildings where dangerous goods are kept or handled and which may be used by people in the course of their work at the premises. • (f) Adequate ventilation shall be provided for all storage and handling areas • (g) Stores shall be provided with a means of either containing a spill or diverting it to a compound within the boundaries of the premises. The net capacity of any compound shall be— • (i) for Packing Group I liquids, 100% of the aggregate volume of liquids kept. • (ii) for Packing Groups II and III liquids, 25% of the aggregate volume of liquids kept. • In any case, the net capacity of any compound shall be at least the capacity of the largest container kept. • The compound shall be impervious to the material it is designed to contain. • NOTES: • 1 In order to facilitate the management of emergencies, it is recommended that compound capacities be about 10% greater than the minimal values specified above. • 2 Earth by itself without a lining does not satisfy the impermeability criteria given above.

  9. Storage continued • (h) All areas used for decanting shall have floors that are capable of containing a spill or of diverting it to a suitable compound within the boundaries of the premises. • (i) Packages shall be kept in a manner such that they cannot fall and cause spillage outside the compound. • (j) Stores shall be secured against unauthorized entry. The storage area shall be considered a ‘restricted area’. • (k) Where provided, and except where they are designed as spill trays or compounds, racks or shelves shall be designed and constructed in such a manner as to prevent the accumulation or pooling of liquid. • (l) Where racking is used, the layout of racks shall be such as to provide clear passage for escape of personnel. • NOTES: • 1 It is recommended that the width of aisles between racks be at least 1.2 m. • 2 Where packages are stored on pallets, sufficient clear manoeuvring space should be made for forklifts, in accordance with the forklift manufacturer’s specification. • (m) Where packages are kept in stacks, the stacks shall be arranged in such a manner as to minimize the possibility of stack collapse and to prevent damage to packages in lower layers from loadings exerted by the upper layers. • (n) Stores of toxic substances having one or more Subsidiary Risks shall, in addition to the requirements of this Standard, comply with the appropriate package storage requirements of applicable legislation or Standards relevant to those Subsidiary Risks. • (For example, where packaged dangerous goods of Class 6.1, Subsidiary Risk 3, are stored indoors, the occupier shall ensure that the store is constructed and maintained in accordance with AS 1940/New Zealand Dangerous Goods. (Class 3—Flammable Liquids) Regulations 1985. • (o) In stores and associated handling areas where combustible dusts or flammable vapours may be generated (e.g. handling a pesticide contained in a low flash point solvent), a hazardous area, as defined in AS 2430/NZS 6101 series, may exist; all electrical and other equipment in any such hazardous areas shall be suitable for use in those zones. • (p) The following items shall be provided within 7 m of, but not nearer than 2 m to, stores where packages are opened: • (i) A safety shower and eye-wash facilities, both complying with ANSI Z 358.1. • (ii) Water for the washing of hands. • (q) Any lunch room or area for eating and drinking shall be separate from the storage area. Lockers, where provided for storing personal clothing and property, shall be located away from the storage area. • Note 1 • Note (1) Source the Australian AS/NZS 4452:1997 The storage and handling of toxic substances—Class 6 page 17, 18 & 19

  10. Management of Leaks • General • Every endeavour shall be made to prevent leaks or spills, and to control them if they do occur. Clean-up action shall be initiated immediately. Leaked or spilled toxic substances shall be kept and disposed of in accordance with Section 9. The decontamination and clean-up procedure and investigation shall be carried out by a properly equipped and trained team of two or more persons. • NOTE: Entry into the affected area should always be under the supervision of a responsible person. • Clean-up materials and equipment • In order to deal with leaks and spills, clean-up equipment, chemicals for neutralizing or decontaminating spills and absorbent materials shall be maintained at all premises on which toxic substances are kept or handled. • NOTE: A typical list of appropriate items is as follows: • (a) Adequate quantities of absorbent material, e.g. sand, fuller’s earth, or suitable proprietary substances for the toxic substance concerned. • (b) Calcium hydroxide (hydrated lime) for use on acidic spills and pesticide spills. • (c) Sodium bisulfate, for use with alkaline spills. • (d) Sodium carbonate (soda ash). • (e) Crushed calcium carbonate (limestone). • (f) A sufficient number of waste-recovery containers, for example, drums made of materials compatible with the substances being kept and appropriately marked as being for emergency use only. • (g) Approved containers made of appropriate materials, for the purpose of repackaging the contents of any leaking packages (see Clause 1.6). • (h) Portable pumps and decanting equipment. • (i) Shovels. • (j) Yard broom. • It is essential that the spill clean-up equipment be appropriate for the substance concerned, for example some toxic substances, for example, polyfunctional isocyanates react exothermically with alkaline substances such as sodium carbonate (soda ash) and with water.

  11. Management of Leaks Continued • Actions for dealing with leaks and spills • At every occurrence of a leak or spill, the emergency plan shall be implemented. When a dangerous situation occurs, the emergency services shall be notified. • Leaking packages shall be positioned in such a manner as to stop or minimize the leak and, if necessary, shall be moved to a safe location. Either the package should be placed in a suitable container, e.g. plastic bag or an oversize drum, or its contents should be transferred to clean packaging. The exterior of such clean packaging shall be clearly labelled in accordance with Clause 1.7. • Small spills on the floor, or on the walls or structures of a building, should be absorbed, and the absorbent placed in a suitable waste container for disposal. • Maintenance of clean-up equipment After use, equipment such as shovels, or similar, shall be decontaminated by an appropriate method, for example by soaking in a 5 percent sodium carbonate (soda ash) solution for at least 24 hours. The equipment shall be thoroughly washed with water containing detergent, then rinsed and dried. • Note (1) • Note (1) Source the Australian AS/NZS 4452:1997 The storage and handling of toxic substances—Class 6 page 39

  12. Personal Habits • The following directions shall be followed by all persons whose work involves the handling of toxic substances: • (a) Do not introduce, keep, prepare or consume any food or drink, or use tobacco, in any place where toxic substances are stored or handled. • (b) Toxic substances should not be allowed to come in contact with the skin; if skin contact occurs, wash off immediately. After handling toxic substances, always wash your hands before eating, drinking, smoking or using the toilet, and after work. • (c) Immediately attend to injuries caused by contact, or suspected contact, with toxic substances. • The above directions, or wording to the same effect, shall be prominently displayed in the • work area. • Note (1) • Note (1) Source the Australian AS/NZS 4452:1997 The storage and handling of toxic substances—Class 6 page 34

  13. First Aid • General • Advice shall be obtained from an occupational medical practitioner as to what first aid facilities and response are required. This will be dependent on the nature of the toxic substance, its quantity, and the location of the industry. • An administrative procedure shall be in place to regularly review this advice as opinions on what constitutes an appropriate response and what antidotes, if any, are appropriate, are continually changing. • The following requirements shall also apply: • (a) A first aid station shall be provided in a clean area and shall be in the care of a responsible person. It shall comprise, as a minimum, an appropriate first aid kit and first aid instructions, e.g. copies of MSDSs, for all toxic substances being kept or handled on the premises. • (b) A list of persons trained in, and designated as being responsible for the administering of, first aid shall be shown on all notice boards on the premises and at each first aid station. The names and telephone numbers of one or more on-call physicians, the nearest hospital, the Poisons Information Centre and the ambulance service shall be included on the list. • First aid kit • In addition to the standard kit required by occupational health legislation, the following shall be supplied. • (a) Eye-wash facilities complying with ANSI Z 358.1. • (b) Appropriate resuscitation facilities, and a poster detailing the correct method of resuscitation. • Where antidotes are held, an administrative procedure shall be in place to ensure that they are replaced before their expiry date is exceeded. Antidotes and the instructions for their use should be kept in a clearly labelled box.

  14. First Aid continued • First aid procedure • When any discomfort is reported, or a person has inhaled, ingested or been contaminated with a toxic substance, the procedures to be carried out include the following: • (a) Remove the patient to a safe place prior to treatment, if safe to do so. The rescuers shall be properly protected depending on the nature of the hazardous incident, for example appropriate personal protective equipment which can include self-contained breathing apparatus and lifelines. • (b) Send for a designated first aid person and, at the same time, obtain the MSDS for the toxic substance involved. Summon professional medical assistance without delay. If there is any doubt as to the appropriate first aid procedure contact, in Australia, the • (c) If the patient has stopped breathing, ensure a clear airway and apply an appropriate method of artificial resuscitation. • NOTE: The appropriate method depends on the substance involved. Oxygen resuscitation or external air resuscitation may be required. • (d) If the eyes are contaminated, wash thoroughly with water from a low-pressure water source for at least 15 minutes. • (e) Remove all contaminated clothing and footwear. Wash contaminated area with soap and lukewarm water. • (f) Carry out appropriate first aid treatment and if medical assistance has not been summoned, transport the patient to a hospital or doctor. • (g) Send the MSDS, product label if available, and all relevant details of the accident, to the hospital or doctor with the patient. • Note (1) • Note (1) Source the Australian AS/NZS 4452:1997 The storage and handling of toxic substances—Class 6 page 35 & 36

  15. Test your knowledge • Through the following slides you will be asked an number of questions to show that you have understood the content of this learning tool • Please record your answer on the training form F-260. • You will be required to submit the answers to the DGL HSEQ unit

  16. Question 1 • What is a Toxic Substance? • a) 50 °C has a vapour pressure greater than 300 kPa • b) substances liable either to cause death or serious injury or to harm human health if swallowed or inhaled or by skin contact • c) substances known or reasonably expected to contain pathogens • d) They are a substance that can or will explode when handled by humans

  17. Question 2 • What is a Infectious Substance? • a) substances known or reasonably expected to contain pathogens • b) a chemical that is injected into your body • c) substances liable either to cause death or serious injury or to harm human health if swallowed or inhaled or by skin contact • d) a substance that grows in your body.

  18. Question 3 • What does the abbreviation LD50 stand for? • a) local doctor • b) large drum • c) median lethal dose • d) laboratory doctor

  19. Question 4 • How many properties does an infectious substance have according to the DG code? • a) 3 • b) 7 • c) 9 • d) 5

  20. Question 5 • What is the main 2 colours and the location of the number “6” on the placards for class 6? • a) Black & White – Top of the placard • b) Black & Cream – Bottom of the placard • c) Black & White – Bottom of the placard • d) Black & Cream – Top of the placard

  21. Question 6 • How is a Toxic substance toxicity classified? • a) Hazchem Code • b) Packing groups • c) Un code • d) Flashpoint

  22. Question 7 • If there was a open packaged store what would have to be located no more then 7m and not any closer then 2m? • a) Safety Shower, Eye Wash & water for washing hands • b) Eye wash, rags to wipe hands on & a shower. • c) Nothing is required as it can wait until the end of a shift. • d) Water for washing hands & paper towel.

  23. Question 8 • After a clean up has taken place what should be done with the equipment? • a) The equipment needs to be cleaned with water detergent, rinsed and dried • b) The equipment should be put away with the other equipment • c) The equipment needs to be cleaned by soaking in a solution of soda ash • d) Both A & C

  24. Additional information • For more information on Class 6 products the following sources may be of assistance • Australian Dangerous Goods Code 7th Edition • Available to all DGL employees via the company’s intranet • AS/NZS 4452:1997 The storage and handling of toxic substances—Class 6 • Available to all DGL employees via the company’s intranet

More Related