1 / 19

Ch.1 Introduction

Ch.1 Introduction. Optoelectronic devices : - devices deal with interaction of electronic and optical processes Solid-state physics : - study of solids, through methods such as quantum mechanics, crystallography, electromagnetism and metallurgy Elemental semiconductors :

garcias
Download Presentation

Ch.1 Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ch.1 Introduction • Optoelectronic devices: • - devices deal with interaction of electronic and optical processes • Solid-state physics: • - study of solids, through methods such as quantum mechanics, crystallography, electromagnetism and metallurgy • Elemental semiconductors: • - Si, Ge, ..etc. • - indirect bandgap, low electric-optics conversion efficiency • Compound semiconductors • -III-V (e.g. GaN, GaAs), II-VI • -direct bandgap, high electric-optics conversion efficiency • GaAs, InP • - higher mobility than Si, Ge, • - energy band gap, Eg: 1.43 (GaAs), 1.35 (InP) • - most common substrate, used to grow up compound semiconductors

  2. Periodic Table

  3. Band structure • Band structure: • - results of crystal potential that originates from equilibrium arrangement of atoms • in lattice - directed from potential model and electron wave equation (Schrodinger equation) time-dependent Schrodinger equation E: electron energy, φ:wave equation, m: electron mass, ħ: Plank constant

  4. Electron energy band diagram v.s. wave number

  5. Energy bandgap v.s. lattice constant

  6. Bonding in solids • Van der Waals bonding: formation of dipoles between atoms and their electrons e.g.: inert gas, like Ar • Ionic bonding: electron exchange between atoms produces positive and negative ions which attract each other by Coulomb-type interactions e.g. NaCl, KCl • covalent bonding sharing of electrons between neighboring atoms e.g.: elemental and compound semiconductors • Metallic bonding: valence electrons are shared by many atoms (bonding not directional, electron free or nearly free contributed to conductivity) e.g.: Zn

  7. Body-Centered Cubic (BCC) structure http://stokes.byu.edu/bcc.htm e.g. iron, chromium, tungsten, niobium

  8. Face-Centered Cubic (FCC) structure e.g.: aluminum, copper, gold, silver http://stokes.byu.edu/fcc.htm

  9. Diamond Cubic (FCC) structure http://zh.wikipedia.org/zh-tw/File:Diamond_Cubic-F_lattice_animation.gif

  10. Zincblende structure • Diamond structure, Zincblende structure e.g.: Si, Ge e.g.: aluminum, GaAs

  11. Atomic arrangement in different solids

  12. Dislocation & strain • Dislocationoccurs if - epitaxial layer thickness > hc (critical thickness), or - epitaxial layer thickness < hc, but with large mismatch • Strain occurs if - epitaxial layer thickness < hc, and with small mismatch

  13. Strain semiconductor • a) lattice match b) compressive strain c) tensile strain • Strain offer flexibility for restriction of lattice mismatch

  14. Crystal Growth • Bulk growth: - furnace growth - pulling technique • Epitaxial growth: - Liquid Phase Epitaxy (LPE) - Vapor Phase Epitaxy (VPE), or termed Chemical Vapor Deposition (CVD) - Molecular Beam Epitaxy (MBE)

  15. Epitaxy • epi means “above” taxis means “in order manner” epitaxy can be translated to “to arrange upon” • with controlled thickness and doping • subtract acts as a seed crystal, deposited film takes on a lattice structure and orientation identical to the subtract • different from thin film deposition that deposit polycrystalline or amorphous film • - homoepitaxy: epi and subtract are with the same material • epi layer more pure than subtract and have different doping level - hetroepitaxy: • used for - Si-based process for BJT and CMOS, or - compound semiconductors, such as GaAs

  16. Epitaxy Material Growth Methods • Liquid Phase Epitaxy • Vapor Phase Epitaxy (VPE), or termed Chemical Vapor Deposition (CVD) - formation of condensed phase from gas of different chemical composition - distinct from physical vapor deposition (PVD) such as sputtering, e-beam deposition, MBE (condensation occurs without chemical change) - gas stream through a reactor and interact on a heated subtract to grow epi layer • Molecular Beam Epitaxy

  17. Doping of Semiconductors • Intrinsic materials:undoped • - Undoped materials by epitaxy technology have more carriers than in intrinsic • material. e.g. GaAs: 1013 /cm3 (instrinsic carrier concentration: 1.8x106 /cm3) • - impurity comes from source materials, carrier gases, process equipment, or • subtract handle • Extrinsic materials: • - n-type: III sub-lattice of III-V compound is substituted by V elements: impurity terms “donor” • - p-type: V sub-lattice of III-V compound is substituted by III elements: impurity terms “acceptor” http://www.siliconfareast.com/sigegaas.htm

  18. Optical fiber - lowest loss at 1.55 um - lowest dispersion” 1.3 um

  19. Energy band theory

More Related