1 / 15

Characteristics of Wood and Squaring stock

Characteristics of Wood and Squaring stock. Characteristics of Wood. Trees provide us with: · lumber plywood Paper medical supplies and drugs All trees are classified as either · hardwood softwood Deciduous trees (hardwoods) - shed their leaves at the end

frey
Download Presentation

Characteristics of Wood and Squaring stock

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Characteristics of Woodand Squaring stock

  2. Characteristics of Wood • Trees provide us with: · lumber • plywood • Paper • medical supplies and drugs • All trees are classified as either · hardwood • softwood • Deciduous trees (hardwoods) - shed their leaves at the end of the growing season Ex. Oak, maple, cherry, ash • Conifer trees (softwoods) - have needles and cones Ex. Pine, spruce, fir, cedar • All types of wood vary in color, strength, mass and grain pattern.

  3. Parts of a Tree Crown - Includes the leaves and the branches - Creates oxygen and food (sugar) by photosynthesis Trunk- provides support for the tree - transport nutrients and water from the roots to the crown - moves the food made by the leaves back down to all the branches and the rest of the tree Roots - gathers water and minerals from the soil

  4. Structures of Wood /Sapwood Pith = 1 year of growth Pith

  5. Cutting and Milling Lumber 1. Logs are cut into rough boards of various thickness, with the use of bandsaws or circular saw (depends on the facility and the price of the wood) • Edgers (cut width) and trimmer saws (cut length) cutboards to proper widths and lengths. 3. All the boards are then sorted, graded and dried. 4. Drying Lumber - green lumber is 50% waterdried lumber is 7-10% water • Grading - the grade of the lumber depends on the amount of defects in the wood - In general, defects decrease the value of woodalthough some people like specific defects in wood and will pay extra money for it! ex. Wormy butternut or Birdseye maple

  6. Types of Warping in Lumber • As wood/lumber dries weird things happen! BOW CUP TWIST CROOK

  7. Natural Defects in Wood Pitch Pocket Stains and wood rot Worm/insect holes Wane (bark) Pith

  8. Types of Wood Knots Live or Tight Knot – will not fall out but may chip Dead Knot -will fall out

  9. Stock Thickness- measures the distance between the sides Width - measures the distance between the edges Length - measures the distance between the ends - usually is measured the direction of the grain Why is it important that you know these term? - common communications in the classrooms and in industry • Lumber dimensions are always given in this order…. T x W x L ex. 2 x 4 x 8

  10. But lumber dimensions are not what they seem! 2x4x8 is not 2” thick, 4” wide by 8’ long It is 1 ½” thick, 3 ½”wide by 8’ long Why? Because the wood needs to be dressed (smooth) and true (square) These are industry standards! STOCK - any piece of wood or lumber -rough or dressed - or sheet goods TRUE - a piece of stock that is dressed and has these qualities * all surfaces are flat * all surfaces are smooth * all edges are 90° to the faces * all sides are parallel

  11. How do we get dressed, true stock? 1. Cut to rough length - Radial Arm Saw 2. Joint one side and one edge - Jointer 3. Plane to finished thickness - Planer 4. Cut to finished width - Table Saw • Cut to finished length - Radial Arm Saw or Chop Saw *trim off one end first and then cut to finished length

  12. Radial Arm saw 1. Cut off all the end checks and defects (1” to 2”) 2. Measure the rough length (add 1” to finished length) with a tape measure and square a line with a pencil and a square 3. Cut to rough length, on the waste side of the line! SAFETY RULES • Never cross your hands when cutting stock  • Knock scrap pieces away with a scrap piece of wood • Never use your hands!

  13. Jointer Now we have a piece of stock that is cut to rough length! 1. Joint one side with the cup side down - safer and less waste * This will be called the ‘face side’ 2. Joint one edge with the face side against the fence SAFETY RULES • Always push the stock all the way through until the guardsnaps shut. • Never remove more than 1/16” in one pass • Always use a push stick when jointing face sides • Always use a push stick when cutting the face edge, if the stock width is less than the height of the fence • Never joint stock that is shorter than 16”

  14. Planer Our stock is now cut to rough length has one smoothside and a smooth edge! 1. Measure the thickness of the stock and subtract 1/8” 2. Set the height of the planer table, using the scale on the side of the planer 3. Plane to this thickness making sure the face side is down 4. Keep following steps 2-4 until you have reached desiredthickness SAFETY RULES • Do not remove more than 1/8” in one pass • Do not look directly into the planer • Do not reach into the planer to clear away the dust -use the air line or hand broom • Keep your fingers on top of the stock, not underneath • Do not plane stock that is shorter than 16”

  15. Table Saw Our stock is now cut to rough length and finished thickness! 1. Set the fence to the desired finished width -measure from the inside of the blade to the fence 2. Cut to the finished width SAFETY RULES • Always use the safety guards whenever possible • Never use the miter gauge and the fence at the same time - causes KICK BACK • Do not stand directly behind the blade - kick back • Use a push stick when ripping stock that is less than 8” in width • Use a helper when ripping long pieces of stock • the helper should never pull the stock through the saw, only support the stock! • only the operator controls the rate of stock feed

More Related