1 / 24

Gear Study on R/V Albatross IV Catch Rates

This study examines the differences in catch rates of the R/V Albatross IV using standard Yankee #36 trawls in two configurations. The objective is to determine the impact of trawl warp offsets on catch rates.

fpeters
Download Presentation

Gear Study on R/V Albatross IV Catch Rates

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NEFSC/Industry Cooperative Survey Gear Study 28 October – 6 November, 2002 OBJECTIVE To examine differences in catch rates of the R/V Albatross IV using standard Yankee #36 trawls in two configurations; one configuration that conformed to standard specifications and a second configuration that was known not to meet specifications, including offset trawl warps. Source Document: Specifications for Construction of NEFSC Standard #36 Bottom Trawl

  2. SAMPLING AREAS • General sampling areas provided by industry • Specific areas determined onboard the ship shallow - approximately 87 m (47.5 fm) in depth mid-depth - approximately 139 m (76 fm) deep - approximately 198 m (108 fm) • Areas selected in order to cover a range of depths and to sample • as many species as possible • Original plan was to sample 2 areas in 1 depth zone then 2 areas in a second depth zone • Weather prevented occupation of 4 areas; therefore a third ‘shallow’ area was sampled

  3. Area 2 100m Area 1 Area 3 NEFSC/Industry Cooperative Survey Gear Study – Part I 28 October – 6 November, 2002 Location of Sampling Areas Closed Area I

  4. BOTTOM PHOTO from NW CAI (Area 1) Albatross Cruise 99-08, July 1998, Site I2 Image provided by Page Valentine, USGS, Woods Hole Field Center

  5. BOTTOM PHOTO from NE CAI (Area 2) Albatross Cruise 99-08, July 1998, Site I2 Image provided by Page Valentine, USGS, Woods Hole Field Center

  6. STATION SELECTION • The areas were 5-minutes by 5-minutes (approximately 25 nm2) • Each area was subdivided into 25 blocks, each 1-minute by 1-minute • Each block was further subdivided into four quadrants • Sixteen blocks were chosen, the maximum possible number of • stations that could be performed during one 24 hour period, • using uniformly distributed random numbers • Stations were then placed in a randomly selected quadrant within • each block

  7. 4.75 4.25 3.75 3.25 2.75 2.25 1.75 1.25 0.75 0.25 GRID USED TO POSITION TOW STARTING POINTS

  8. TOWING PROTOCOLS • Each area sampled for 48 hours • Order of gear configurations used determined by coin toss • One randomly chosen gear configuration was used for 24 hours, • then configurations switched and tows made at the same locations • the following day • Tows offset by approximately 1 additional hour to account for tide • and light conditions • Direction of tows determined by the Captain of the F/V Sea Breeze • Constant scope used for all tows within an area. Scope chosen • was that used for the deepest likely depth in an area

  9. SCOPE AND TRAWL WARP OFFSETS USED IN EACH SAMPLING AREA

  10. GEAR SPECIFICATIONS - R/V Albatross ‘Optimal’ (OPT) • Net #21, constructed prior to the experiment and inspected to meet • the specifications by industry representatives • Doors used (Pair #38) were inspected by industry representatives • to meet tuned door specifications • Backstraps used were fitted with swivels (with the appropriate • number of links removed to maintain standard specification) to • ensure that there were no twists in the chain while the net was • fishing • Even trawl warps; re-measured and certified the day of sailing

  11. GEAR SPECIFICATIONS - R/V Albatross ‘Worst Case Scenario’ (WCS) • Net #14, used during the 24-27 October, 2002 ‘video cruise’ • (the last 4 days of Leg II of AL 02-09, Autumn Bottom Trawl • Survey) • Pair #37 doors considered to be performing poorly during the • ‘video cruise’ • Backstraps with no swivels and intentionally twisted 2 times • Trawl warps offset to match the mis-marked warps used during • 2001-2002 surveys

  12. GEAR SPECIFICATIONS - F/V Sea Breeze • Standard 6" mesh groundfish net • 16” (with 12” at wings) rockhopper footrope with 2” cookies • 110' sweep • 30 fm groundcable used in Area 1 • 50 fm groundcable used in Areas 2 and 3 • 2.4” (6 cm) mesh codend liner

  13. GEAR SPECIFICATIONS

  14. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 1: NW Closed Area I ‘Optimal’ Configuration

  15. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 1: NW Closed Area I ‘Worst Case Scenario’ Configuration

  16. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 1: NW Closed Area I 29-30 October, 2002

  17. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 2: East of Cape Cod ‘Optimal’ Configuration

  18. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 2: East of Cape Cod ‘Worst Case Scenario’ Configuration

  19. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 2: NW Closed Area I 31 October-3 November, 2002

  20. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 3: NE Closed Area I ‘Optimal’ Configuration

  21. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 3; NE Closed Area I ‘Worst Case Scenario’ Configuration

  22. Albatross IV Tows Sea Breeze Tows Location of Paired Tows Area 3: NW Closed Area I 3-5 November, 2002

  23. SAMPLING PROTOCOLS • Albatross • Catch sorted by species and weighed (nearest 0.001 kg) using • motion compensated digital scales • Lengths of all fish measured (nearest cm) • All catch and biological data were recorded using the shipboard • automated data entry system • Sea Breeze • Catch sorted by species and weighed using same scales • Individual fish lengths were taken on a subsample of the catch • when time allowed • Catch weights were recorded on standard fisheries observer program • logsheets and transmitted to the Albatross • Catch numbers and individual fish length data were also recorded on • fisheries observer program logsheets and processed at the Woods • Hole Laboratory the day after the cruise ended

  24. SUMMARY OF TOWS CONDUCTED IN EACH SAMPLING AREA

More Related