1 / 40

Water Content Measurement Methods and Field Applications

Water Content Measurement Methods and Field Applications. Doug Cobos Ph.D. Decagon Devices and Washington State University. Background. About the presenter Ph.D. in Soil Physics, 2003, University of Minnesota Director of Research and Development, Decagon Devices, Inc.

fionn
Download Presentation

Water Content Measurement Methods and Field Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Water Content Measurement Methods and Field Applications Doug Cobos Ph.D. Decagon Devicesand Washington State University

  2. Background • About the presenter • Ph.D. in Soil Physics, 2003, University of Minnesota • Director of Research and Development, Decagon Devices, Inc. • Adjunct Faculty in Environmental Biophysics, Washington State University • Lead Engineer on TECP instrument for NASA 2008 Phoenix Mars Lander

  3. Outline • Direct vs. Indirect measurements • Water content: Gravimetric vs. Volumetric • Water content measurement techniques • Neutron probe • Dual-needle heat pulse • Gravimetric sampling • Dielectric sensors • Time Domain • Frequency Domain • Sensor installation methods • Field applications/examples

  4. Direct measurements Evaluate property directly Length with calipers Mass on a balance Indirect measurements Measure another property and relate it to the property of interest through a calibration Expansion of liquid in a tube to determine temperature Measurement Techniques

  5. Definition: Volumetric Water Content • q is volumetric water content (VWC), • Vw is the volume of water • VT is total sample volume 0.15 m3 Air 0.35 m3 Water 0.35 m3/m3 or 35% VWC Separate into constituent parts 0.50 m3 Soil

  6. Definition: Gravimetric water content • Gravimetric water content (w) • m – mass • w – water • d – dry solids

  7. Two important notes: In situ field measurement methods can only measure volumetric water content You must take soil cores of known volume in the field to measure VWC from gravimetric method Volumetric vs. Gravimetric Water Content • Gravimetric Water Content (GWC) • Water weight per unit dry soil weight • Volumetric Water Content (VWC) • Water volume per unit total volume Soil bulk Density, rb

  8. Direct Water Content: Gravimetric (w) Technique • Generate volumetric water content • Same as gravimetric except soil is sampled with known volume • Calibration instructions: • www.decagon.com/appnotes/CalibratingECH2OSoilMoistureProbes.pdf

  9. Direct Water Content Measurements • Advantages • Simple • Direct measurement • Can be inexpensive • Disadvantages • Destructive • does not account for temporal variability • Time consuming • Requires precision balance & oven

  10. Instruments for Measuring in situ Water Content (indirect) • Neutron thermalization • Neutron probes • Dual needle heat pulse probe • Dielectric measurement • Capacitance/Frequency Domain Reflectometery (FDR) • Time Domain Reflectometry (TDR)

  11. Neutron Thermalization Probe: How They Work • Radioactive source • High-energy epithermal neutrons • Releases neutrons into soil • Interact with H atoms in the soil • slowing them down • Other common atoms • Absorb little energy from neutrons • Low-energy detector • Slowed neutrons collected • “thermal neutrons” • Thermal neutrons directly related to H atoms, water content

  12. Neutron Thermalization Probe: Installation and Calibration • Installation • Auger installation hole • Manual auger or Giddings probe • Install access tube • Calibrate sensor • Gravimetric method with cores of known volume • Single representative site Data courtesy of Scott Stanislav, Leo Rivera and Cristine Morgan, Texas A&M University

  13. Neutron Probe Measurements • Measurements • Uncap hole • Lower probe to specific depth • Take reading at each depth • 14 s to 2 min per reading • Longer read times give better accuracy

  14. Advantages Large measurement volume 10 to 20 cm radius, depending on water content Gets away from issues with spatial variability Single instrument can measure multiple sites Insensitive to salinity, temperature Disadvantages No continuous record Requires radiation certification to use Expensive Heavy Neutron Thermalization Probe

  15. Dual Needle Heat Pulse (DNHP) Technique • Theory • Changes in heat capacity of soil is linear function of water content • Create calibration that relates VWC to heat capacity • Measurement • Use dual needle probe • One needle contains a heater, the other a temperature measuring device • Heat one needle and record temperature over time on the other • Use maximum temperature rise (delta T) to calculate heat capacity and convert to VWC

  16. Dual Needle Heat Pulse Technique • Installation • Push sensor into soil • Make sure needs do not bend during insertion • Connect to datalogger with precision temperature and data analysis/manipulation capabilities

  17. Advantages Small measurement volume Most location-specific method available Can measure water content around growing seed Disadvantages Requires datalogger with precise temperature measurement and analysis Can be susceptible to temperature gradients in soil time depth Integrates small soil volume Fragile Dual Needle Heat Pulse Technique Young et at. (2008) Correcting Dual-Probe Heat-Pulse Readings for Changes in Ambient Temperature, Vadose Zone Journal 7:22-30

  18. Dielectric Theory: How it works • In a heterogeneous medium: • Volume fraction of any constituent is related to the total dielectric permittivity • Changing any constituent volume changes the total dielectric • Because of its high dielectric permittivity, changes in water volume have the most significant effect on the total dielectric

  19. Dielectric Mixing Model: FYI • The total dielectric of soil is made up of the dielectric of each individual constituent • The volume fractions, Vx, are weighting factors that add to unity • Where e is dielectric permittivity, b is a constant around 0.5, and subscripts t, m, a, om, i, and w represent total, mineral soil, air, organic matter, ice, and water.

  20. Volumetric Water Content and Dielectric Permittivity • Rearranging the equation shows water content, q, is directly related to the total dielectric by • Take home points • Ideally, water content is a simple first-order function of dielectric permittivity • Therefore, instruments that measure dielectric permittivity of media can be calibrated to read water content

  21. Dielectric Instruments: Time Domain Reflectometry

  22. Dielectric Instruments: Time Domain Reflectometry • Measures apparent length (La) of probe from an EM wave propagated along metallic rods • La is related to e and therefore q

  23. Advantages Calibration is relatively insensitive to textural difference Output wave provides electrical conductivity information Good accuracy Insensitive to salinity changes when EC is low to moderate. Disadvantages Expensive Does not work at high EC (trace will flatten) Requires waveform analysis (comes with most packages) Sensitive to gaps in soil contact Time Domain Reflectometery

  24. Time Domain Transmission Sensors • Variation of time domain reflectometry • Look at transmission of wave around loop instead of reflection • Utilize fast response circuitry to digitize waveform using onboard sensor • Output dielectric permittivity

  25. Time Domain Transmission Advantages • Lower sensitivity to temperature variation • Little salinity affect at low to medium electrical conductivity (EC) levels • Lower cost Disadvantages • Small volume of influence • Limited field in the soil • Cannot be installed into undisturbed soil • Lose signal at high soil ECs

  26. Dielectric Instruments:Capacitor/FDR Sensor Basics • Sensor probes form a large capacitor • Steel needles or copper traces in circuit board are capacitor plates • Surrounding medium is dielectric material • Electromagnetic (EM) field is produced between the positive and negative plates

  27. Typical Capacitor Capacitor Dielectric Material Negative Plate Positive Plate Electromagnetic Field

  28. Example: How Capacitance Sensors Function 2 cm Sensor (Side View) 1 cm EM Field 0 cm

  29. Getting to Water Content • Charging of capacitor directly related to dielectric • Sensor circuitry converts capacitor charge to an output of voltage or current • Sensor output is calibrated to water content using the direct volumetric water content method discussed earlier

  30. Advantages Lower cost Require simple readout device Easy to install/use Best resolution to changes in water content of any method Resolve changes of 0.00001 m3 m-3 Low Power Disadvantages Some probes are sensitive to soil texture and temperature fluctuations Depends on probe measurement frequency Some require down-hole installation Sensitive to air gaps in soil contact Capacitance/FDR

  31. Sensor Installation • Three types of instruments • Access tube • Permanent installation • “Push-in and Read” • Access Tube • Auger hole to installation depth • Insert access tube sleeve into hole • Air gaps MUST be minimized during installation of sleeve • Install dielectric probe in sleeve and seal OR lower dielectric probe into sleeve at depths of interest

  32. 4 2 3 Permanent Installation • Many techniques for sensors installation • Trench wall • 5 cm diameter auger hole: bottom • 10 cm diameter auger hole: side wall • 45o angled 5 cm auger hole: bottom • Sensor insertion • Sensor width must be vertical not horizontal 1 Install video: www.decagon.com/videos

  33. Sensor Installation • “Push-in and Read” Sensors • Purpose • Spot measurements of VWC • Many measurements over large area • No need for data on changes in VWC over time • Technique • Push probe into soil • Ensure adequate soil to probe contact • Take reading from on-board display

  34. Question: What Technique is Best for My Research? • Answer: It depends on what you want. • Every technique has advantages and disadvantages • All techniques will give you some information about water content • So what are the important considerations? • Experimental needs • Current inventory of equipment • Budget • Required accuracy/precision • Manpower available to work • Certification

  35. Examples: Applying Techniques to Field Measurement • Case 1: Irrigation scheduling/monitoring • Details • 20+ sites, measurements from .25 m to 2 m • Spread over field system • Continuous data collection is desirable • Money available for instrumentation • Eventually moving to controlling irrigation water • Choice • Capacitance sensors • Good accuracy • Inexpensive • Easy to deploy into undisturbed soil • Radio telemetry available to simplify data collection

  36. Examples: Applying Techniques to Field Measurement • Case 2: Plot monitoring • Details • 20 measurement locations, 4 m spacing • VWC measurements at several depths in each location • Measurements required at least daily • Labor available to collect data • Limited budget • Decision • Neutron probe • Accurate • Cost is price of instrument • Measures at multiple depths in access tube • Reliable

  37. Examples: Applying Techniques to Field Measurement • Case 3: Geostatistical survey of catchment water content • Details • Point measurement of water content at statistically significant intervals across a catchment • Low budget • Labor available to take measurements • Spatial variability key to analysis • Decision • Single “Push-in and Read” capacitance instrument • Low cost, easy to use • No installation necessary • Standard calibration available

  38. Conclusion • Many choices for field water content measurement • Several things must be considered to get the right system • Many resources available to make decisions • Manufacturer’s websites • Listservs/Google Group • http://www.sowacs.com • AgSciences Google Group: send email to agscience@googlegroups.com • Application scientists

  39. Which Measurement Technique is Best? Comparison Chart

  40. Which Measurement Technique is Best? Comparison Chart

More Related