1 / 17

Pneumatic Tools

Pneumatic Tools. Pneumatic Tools. Pneumatic Tools are run by compressed air They greatly speed up your work They can be dangerous to you and the equipment you are working on. Air Lines. Pneumatic Tools require compressed air delivered through flexible air lines

fausto
Download Presentation

Pneumatic Tools

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pneumatic Tools

  2. Pneumatic Tools • Pneumatic Tools are run by compressed air • They greatly speed up your work • They can be dangerous to you and the equipment you are working on

  3. Air Lines • Pneumatic Tools require compressed air delivered through flexible air lines • Coil up air lines after each use to avoid tripping, or damage to the air line. • Inspect regularly and do not ignore small leaks in any air line Cont.

  4. Air Lines • When an air line breaks, the compressed air will cause the hose to whip around violently! • Do not try to catch a broken air line that is whipping around • Disconnect air line from wall fitting IMMEDIATELY !

  5. Air Quality • Compressed air holds water • Compressors should be drained daily. • All pneumatic tools should be oiled regularly • You may use a few drops of air tool oil at the air inlet.

  6. Oil Air Tools Regularly

  7. Pneumatic (air) Tools • Air tools are NOISY! • Ear protection can be provided just ASK!

  8. Impact Wrenches

  9. Impact Wrenches • Impact Wrenches can be powered by air, electricity, or with a hammer

  10. Impact Wrenches • Pneumatic (air) powered impacts have the most power and torque. • Electric impacts are much quieter • Impact drivers (hit them with a hammer) are useful for stubborn Phillips head screws

  11. Impact Driver

  12. Impact Wrenches • Impact wrenches can easily twist off a stuck nut or bolt • Impact wrenches should not be used to tighten fasteners. • They will easily over-tighten nuts and bolts

  13. Air Ratchets • Air ratchets can quickly spin on or off a nut or bolt. • If the bolt is stuck, using an air ratchet can “bust your knuckles” • Use a breaker bar to break loose stuck fasteners • Consider a cordless ratchet, it is just as fast, MUCH quieter and more convenient (no air lines)

  14. Cordless (electric) Ratchets • Cordless ratchets are just as fast as air ratchets • They are MUCH quieter… • …and more convenient (no air lines)

  15. Pneumatic Hammers & Chisels • Air chisels are VERY noisy! • They are also dangerousto you and the vehicle! • Do not use this tool without special instruction

  16. Blow Guns • These tools use compressed air to dry off parts that have been washed in solvent • They are very noisy • They should NOT be used to clean off yourself, or equipment.

  17. The End

More Related