1 / 28

Multifunctional Sensor SB-CMS-12in1

Multifunctional Sensor SB-CMS-12in1. Func tion s. PIR motion sensor Ultrasonic sensor LUX sensor Temperature sensor 2 Dry contacts 2 external condition inputs IR(infrared) receiver IR(infrared) transmitter 2ch 5A Relay outputs Constant LUX control

evalewis
Download Presentation

Multifunctional Sensor SB-CMS-12in1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Multifunctional Sensor SB-CMS-12in1

  2. Functions • PIR motion sensor • Ultrasonic sensor • LUX sensor • Temperature sensor • 2 Dry contacts • 2 external condition inputs • IR(infrared) receiver • IR(infrared) transmitter • 2ch 5A Relay outputs • Constant LUX control • security alarm logic (works with Security Module) • 24 configurable logics SB-CMS-12in1

  3. Basic information Subnet ID and Device ID Device remark LED on/off option

  4. IR Transmitter 1.Input a range to be involved 2.Select codes and upload it to 12IN1,it would show in the left table 3.Test the code in 12IN1

  5. IR Receiver Enabe /Disable IR code receiver These 8 keys match with the 8 keys of HDL remote HDL-MTIRW(Select LCD panel,the 5 pages correspond to this 5 pages)

  6. IR Reveiver Select control mode Save

  7. IR Reveiver Set the target for each key

  8. Sensor Setting Right click to refresh the status displaying you can enable/disable these functions here, you also can send the UV switch ON/OFF commond to enable/disable these functions Constant LUX function(pay attention to remark)

  9. Sensor Setting Right click to refresh the status displaying Power off recover options

  10. Logic Relation Select Logic relation Combine Logic input condition

  11. Logic Relation Logic True delay time trigger targets when the logic is true. Logic False delay time trigger taegets when the logic is false.

  12. Security Function Enable the security function of ch1 Assign ch1 to the security module(10/12), area1

  13. Relay Settings Built-in 2 channel 5A Relay Cycle Mode:Relay turns on and off periodically

  14. Simulate Test Simulate some sensors' value or status. This is very useful when test the new-created Logic.

  15. Application Requirements: 1. When people open the door and come into the meeting room, turn on the lights automatically 2. 1 minute after people come into the room, turn on the AC and set the temperature as 25℃ 3. 1 minute after people left the room, turn off the lights and set temperature as 27 ℃ 4. 3 minutes after people left the room, turn off the AC automatically

  16. Application When people open the door and come into the meeting room, turn on the lights automatically

  17. Application Delay time=1m Select "Movement" Suppose dry contact 1 has been connet with a magnetic contact and used to detect the door status. Select "AND" Save

  18. Application Turn on the light when the Logic is true

  19. Application B. 1 minute after people come into the room, turn on the AC and set the temperature as 25℃

  20. Application Delay time=1m Select "Movement" Select "Connect"--Close the door Select "AND" Save

  21. Application Check the index no. in SB-DN-EM,the third one is colling 25 Fill in the index no. here

  22. Application C. 1 minute after people left the room, turn off the lights and set temperature as 27 ℃

  23. Application Delay time=1m Select "No Movement" Save

  24. Application Turn off the light and set the temperature as 27 ℃

  25. Application D. After 3 minutes people left the room, turn off the AC automatically

  26. Application Delay time=3m Select "No Movement" Save

  27. Application Fill in the index no., Index no.=2

More Related