1 / 13

Computation of Evapo -transpiration by Soil moisture Depletion Studies

Computation of Evapo -transpiration by Soil moisture Depletion Studies. By B.Hari Prasad. Introduction . The soil moisture depletion method is usually employed to determine the consumptive use of irrigated field crops. . Conditions. Crops grown on uniform soils

erasto
Download Presentation

Computation of Evapo -transpiration by Soil moisture Depletion Studies

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Computation of Evapo-transpiration by Soil moisture Depletion Studies By B.Hari Prasad

  2. Introduction • The soil moisture depletion method is usually employed to determine the consumptive use of irrigated field crops.

  3. Conditions • Crops grown on uniform soils • The depth to the ground water is such that it will not influence the soil moisture fluctuation within the root zone.

  4. It involves measurement of soil moisture from various depths at a number of times throughout the growth period. • Greater the number of measurements, more is the information obtained from the studies.

  5. Consumptive use (Cu) is calculated from the change in soil moisture in successive samples fro the following equation: • u = water use from the root zone for successive sampling periods or within one irrigation cycle • n = number of soil layers sampled in the root zone • M1i = soil moisture percentage at the time of the first sampling in the i-th layer • M2i = soil moisture percentage at the time of the second sampling in the i-th layer • Ai = apparent specific gravity of the i-th layer of the soil • Di = depth of the i-th layer of the soil(mm)

  6. Measurement of soil moisture • Feel Method • Tensiometers • Sampling and drying • Electrical Resistance(Gypsum) Blocks • The neutron probe method

  7. Feel Method • estimating soil-water by feeling the soil • easy to use • results depend on the experience of the individual making the measurement • Reliability is usually poor unless the operator is very experienced • not generally recommended

  8. Tensiometer • A tensiometer is a sealed, airtight, water-filled tube (barrel) with a porous tip on one end and a vacuum gauge on the other • measures soil water suction (negative pressure) • Soil-water tension is commonly expressed in units of bars or centibars

  9. Electrical Resistance(Gypsum) Blocks • best suited for finer-textured soils • since the 1940s • The resistance of the electrode is proportional to the moisture content of the block.

  10. The Neutron Probe Method • Neutrons emitted by the source have an average speed of about 6,000 miles per second and are called "fast neutrons.“ • Slow Neutrons after losing energy travels at a speed of about 1.7 miles per second are detected by neutron detector.

  11. references • “Irrigation Theory and Practice” by Michael • http://cru.cahe.wsu.edu/CEPublications/pnw0475/pnw0475.html • http://www.bae.ncsu.edu/programs/extension/evans/ag452-2.html

More Related