1 / 1

Abstract

35 mm. 18 mm. 28.8 mm. 124.8 mm. 20 mV. 20 ns. 40 ns. ΔT =1µs.

Download Presentation

Abstract

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 35 mm 18 mm 28.8 mm 124.8 mm 20 mV 20 ns 40 ns ΔT =1µs BEAM POSITION MONITORS USING A RE-ENTRANT CAVITY C. Simon1, S. Chel1, M. Luong1, P. Contrepois1, P. Girardot1, N. Baboi2 and N. Rouvière31 CEA DSM/DAPNIA/SACM, Saclay, France, 2 DESY Hamburg, Germany, 3 CNRS IN2P3 –IPN Orsay, FranceContact: claire.simon@cea.fr - michel.luong@cea.fr Abstract Two designs of high resolution beam position monitor, based on a radiofrequency re-entrant cavity, are developed at CEA/Saclay. The first monitor is developed in the framework of the European CARE/SRF program. It is designed to work at cryogenic temperature, in a clean environment and get a high resolution with the possibility to perform bunch to bunch measurements. Two prototypes with a large aperture (78 mm) are installed in the Free electron LASer in Hamburg (FLASH), at DESY. The other design with an aperture of 18 mm and a large frequency separation between monopole and dipole modes, as well as a low loop exposure to the electric fields is developed for the Clic Test Facility (CTF3) probe beam CALIFES at CERN. It is operated in single bunch and multi-bunches modes. This poster presents the mechanical and signal processing designs of both systems. BPM installed in the FLASH linac Re-entrant Cavity BPM • Coaxial re-entrant cavities have been chosen for the beam orbit measurement because of their mechanical simplicity and excellent resolution. • Passing through the cavity, the beam excites electromagnetic fields (resonant modes), which are coupled by four feedthroughs to the outside. • Main radio-frequency modes excited by the beam in the cavity: • the monopole mode signal is proportional to beam intensity and does not depend on the beam position • the dipole mode signal is proportional to the distance of the beam from the centre axis of the monitor. • Spring 2006, the re-entrant BPM (Fig. 4) was installed in a warm part in the FLASH linac (Fig. 5) at DESY. Cu-Be RF contact welded in the inner cylinder of the cavity to ensure electrical conduction. Figure 5: RF Cavity installed in the FLASH linac Twelve holes of 5 mm diameter drilled at the end of the re-entrant part for a more effective cleaning. BPM designed for the CTF3 probe beam • A design, with a large frequency separation between monopole and dipole modes, as well as a low loop exposure to the electric fields, has been developed (Fig. 1) for the CTF3 probe beam CALIFES. Figure 4: Drawing of the cavity BPM • RF characteristics are presented in the Table 3. • Six BPMs will be installed on the CTF3 probe beam CALIFES. • Dipole mode frequencychosen around 5.997 GHz for a resonant operation with 64 bunches. The mechanical dimension Ø 28.8 mm will be adjusted to have the dipole mode frequency close to 5.997 GHz. Figure 6 :New design for the XFEL cold re-entrant BPM Table 3: RF characteristics of the re-entrant BPM Figure 1: Re-entrant cavity designed for CALIFES • The signal processing uses a single stage downconversion to obtain Δ/Σ (Fig. 7) . • The resonant cavity was designed with the software HFSS (Ansoft). The RF measurements presented in the Table 1 are an average of the frequencies and external Q measured on the six BPMs . • The cross_talk is quite high, it was measured in laboratory better than 28 dB on each BPM. Figure 7 : Signal processing electronics Beam measurements with the BPM installed in the FLASH linac Table 1: RF characteristics of the CTF3 probe beam BPM • The position measured by the re-entrant BPM vs the calculated position was plotted for the horizontal and vertical steerings (Fig. 8). • Signal processing uses a single stage downconversion (Fig. 2). - Isolation of the hybrids can be adjusted by phase shifters to reject the monopole mode Figure 8.Calibration results in LINAC frame from horizontal (left) and vertical (right) steerings • Good linearity in a range  15 mm • RMS resolution : 4 µm measured on the vertical channel 8 µm measured on the horizontal channel Figure 2 : Signal processing electronics RMS resolution limited by the electromagnetic contamination in the experimental hall • To assess the performances of the system (Table 2), a model is elaborated with Mathcad. - RF re-entrant cavity model is a resonant RLC circuit - The transfer functions of different devices composing the signal processing are determined by the S parameters measured with a network analyzer. Main features of the BPM installed in the FLASH linac: - Measured resolution ~ 4 µm with a dynamic range  5 mm - Time resolution 40 ns (Fig. 9) bunch to bunch measurements (Fig. 10) - Large aperture 78 mm - Operated at cryogenic temperature in a clean environment - 2008  New prototype for the XFEL Table 2. CALIFES BPM RMS resolution Figure 9 : Output signal from signal processing Resolution ~ 3.2 µm with dynamic range +/- 5 mm Operated in single and multi-bunches modes (226 bunches) 2008 6 BPMs (Fig. 3) installed in the CTF3 probe beam Sept. 2008  first beam tests • 30 BPMs will be installed in the XFEL cryomodules. Figure 3 : CALIFES BPM Figure 10: RF signal measured at one pickup

More Related