1 / 29

Course web page: ece.gmu/courses/ECE545/index.htm

ECE 545 Introduction to VHDL. Course web page: http://ece.gmu.edu/courses/ECE545/index.htm. ECE web page  Courses  Course web pages  ECE 545. Kris Gaj. Assistant Professor at GMU since Fall 1998. Research and teaching interests: cryptography network security computer arithmetic

elias
Download Presentation

Course web page: ece.gmu/courses/ECE545/index.htm

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECE 545 Introduction to VHDL Course web page: http://ece.gmu.edu/courses/ECE545/index.htm ECE web page  Courses  Course web pages  ECE 545

  2. Kris Gaj Assistant Professor at GMU since Fall 1998 • Research and teaching interests: • cryptography • network security • computer arithmetic • VLSI design and testing • Contact: • Science & Technology II, room 223 • kgaj@gmu.edu, (703) 993-1575 Office hours: R, W 7:30-8:30 PM T 5:00-6:00 PM

  3. ECE 545 Part of: MS in CpE Digital Systems Design Microprocessor and Embedded Systems MS in EE

  4. Courses Design level Computer Arithmetic VLSI Design Automation VLSI Test Concepts Introduction to VHDL algorithmic ECE 645 ECE 681 ECE 545 register-transfer ECE 682 gate ECE 586 transistor Digital Integrated Circuits ECE 680 layout Physical VLSI Design MOS Device Electronics devices ECE684

  5. New MS CpE Course Requirements Recommended for students who by the end of Summer 2004 completed FOUR OR LESS graduate courses towards their MS CpE degree

  6. Core courses • There are TWO core courses common for all concentration • areas: • CS 571 Operating Systems – H. Aydin, S. Setia, C. Snow, project, C/C++ or Java • Pros: • Prerequisite for many other courses and projects • HLL (High Level Language) refresher • Offered regularly in Fall and Spring • ECE 548 Sequential Machine Theory – K. Hintz, R. Schneider • Pros: • Common theoretical and mathematical foundation used in all • concentrations • Offered regularly in Spring • Not a strong prerequisite for any other course; can be taken any time • during the curriculum.

  7. Required courses • There are FOUR required courses separate for each • concentration area • Criteria of choice: • Logical sequence of four courses giving a strong foundation for • a study, research, and professional position in a given concentration • area. • All courses will be offered on a regular basis (at least once per year). • Substitutions should be allowed only under exceptional circumstances. • At least two courses are ECE courses taught by the • Computer Engineering faculty, the remaining two courses are • chosen from among the most related courses in the EE, CS, • and INFS programs. • Should include projects, and guarantee the required level of difficulty • needed to obtain the CpE degree.

  8. DIGITAL SYSTEMS DESIGN • Concentration advisor: Ken Hintz • ECE 545 Introduction to VHDL – K. Hintz, K. Gaj, project, VHDL, Aldec/ModelSim, Synplicity/Synopsys • ECE 645 Computer Arithmetic: HW and SWImplementation – K. Gaj, project, VHDL, Aldec/Synplicity/Xilinx and Synopsys • ECE 586 Digital Integrated Circuits – D. Ioannou • ECE 681 VLSI Design Automation – K. Kazi, R. Mehler, project, VHDL, ModelSim and Synopsys

  9. MICROPROCESSOR AND EMBEDDED SYSTEMS • Concentration advisor: Peter Pachowicz • ECE 511 Microprocessors– P. Pachowicz • ECE 545 Introduction to VHDL– K. Hintz, K. Gaj, project, VHDL, Aldec/ModelSim, Synplicity/Synopsys • ECE 611 Advanced Microprocessors– D. Tabak • ECE 612 Real-Time Embedded Systems– K. Hintz

  10. NETWORK AND SYSTEM SECURITY • Concentration advisor: Kris Gaj • ECE 542 Computer Network Architectures and Protocols– S.-C. Chang, et al. • ECE 646 Cryptography and Computer Network Security– K. Gaj – lab, project, C/C++, VHDL, or analytical • ECE 746 Secure Telecommunication Systems– K. Gaj – lab, project, C/C++, VHDL, or analytical • INFS 766 Internet Security Protocols– R. Sandhu

  11. COMPUTER NETWORKS • Concentration advisor:Brian Mark • ECE 528 Random Processes in ECE– J. Gertler • ECE 542 Computer Network Architectures and Protocols– S.-C. Chang • ECE 642 Design and Analysis of Comp. Comm. Networks – B. Mark – programming assignments Matlab/C++/Java • ECE 742 High Speed Networks– B. Mark – analytical project

  12. Elective courses • Each student can choose 4 elective courses from • a list of electives common for all concentration areas. • All elective courses must be • approved by the concentration area advisor • (in the form of a partial or complete plan of study) • prior to registering for these courses.

  13. Old MS CpE Course Requirements Recommended for students who by the end of Summer 2004 completed FIVE OR MORE graduate courses towards their MS CpE degree

  14. Digital Systems Design Core Courses ECE 545 ECE 586 ECE 548 ECE 584 ECE 645 ECE 680 ECE 681 ECE 682 Required Courses (replacement requires an approval of the concentration area advisor)

  15. Microprocessor and Embedded Systems ECE 511 CS 571 Core Courses ECE 542 ECE 548 CS 540 ECE 611 ECE 612 ECE 641 CS 668 Required Courses (replacement requires an approval of the concentration area advisor)

  16. Concentration Area Advisors (for both old and new degree requirements) DIGITAL SYSTEMS DESIGN: Ken Hintz COMPUTER NETWORKS: Brian Mark NETWORK AND SYSTEM SECURITY:Kris Gaj MICROPROCESSOR AND EMBEDDED SYSTEMS: Peter Pachowicz

  17. ECE 545 Lecture Projects Homework 30 % Midterm exam 20 % in class 20 % take home 30 %

  18. Midterm exam 1 • 2 hours 30 minutes • in-lab • open-books, open-notes • practice exams will be available on the web Tentative date: Thursday, October 28th

  19. Midterm Exam 2 • take-home • 24 hours Tentative date: Thursday, December 9th

  20. Project technologies semi-custom Application Specific Integrated Circuits and Field Programmable Gate Arrays

  21. Levels of design description Algorithmic level Level of description most suitable for synthesis Register Transfer Level Logic (gate) level Circuit (transistor) level Physical (layout) level

  22. Register Transfer Logic (RTL) Design Description Registers … Combinational Logic Combinational Logic Clock

  23. Design Process for ASICs (1) VHDL code VHDL simulator Functional verification Library of standard cells Logic Synthesis Speed without routing Area without routing Netlist

  24. Design Process (2) Netlist Library of standard cells Placing & routing Area with routing Speed with routing Layout

  25. Design process for FPGAs (1) Design and implement a simple unit permitting to speed up encryption with RC5-similar cipher with fixed key set on 8031 microcontroller. Unlike in the experiment 5, this time your unit has to be able to perform an encryption algorithm by itself, executing 32 rounds….. Specification (Lab Experiments) VHDL description (Your Source Files) Library IEEE; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; entity RC5_core is port( clock, reset, encr_decr: in std_logic; data_input: in std_logic_vector(31downto0); data_output: out std_logic_vector(31downto0); out_full: in std_logic; key_input: in std_logic_vector(31downto0); key_read: out std_logic; ); end AES_core; Functional simulation Synthesis Post-synthesis simulation

  26. Design process for FPGAs (2) Implementation Timing simulation Configuration On chip testing

  27. CAD software available at GMU (1) VHDL simulators • ModelSim (under Unix) • available from all PCs in the ECE educational labs • using an X-terminal emulator • available remotely from home using a fast Internet • connection and VNC software. • Aldec Active-HDL (under Windows) • available in the FPGA Lab, S&T II, room 203

  28. CAD software available at GMU (2) Tools used for logic synthesis • Synopsys Design Compiler (under Unix) • available from all PCs in the ECE educational labs • using an X-terminal emulator • available remotely from home using a fast Internet • connection and VNC software. • Synplicity Synplify Pro (under Windows) • available in the FPGA Lab, S&T II, room 203

  29. CAD software available at GMU (3) Tools used for implementation in the FPGA technology • Xilinx ISE (under Windows) • available in the FPGA Lab, S&T II, room 203

More Related