1 / 41

Chapter 7 Estimation

Chapter 7 Estimation. Point Estimate. an estimate of a population parameter given by a single number. Examples of Point Estimates. is used as a point estimate for μ. s is used as a point estimate for σ. Error of Estimate.

edwardi
Download Presentation

Chapter 7 Estimation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 7Estimation

  2. Point Estimate an estimate of a population parameter given by a single number

  3. Examples of Point Estimates • is used as a point estimate for μ. • s is used as a point estimate for σ.

  4. Error of Estimate the magnitude of the difference between the point estimate and the true parameter value

  5. The error of estimate using as a point estimate for μ is:

  6. Confidence Level • A confidence level, c, is a measure of the degree of assurance we have in our results. • The value of c may be any number between zero and one. • Typical values for c include 0.90, 0.95, and 0.99.

  7. Critical Value for a Confidence Level, c the value zc such that the area under the standard normal curve falling between – zc and zc is equal to c.

  8. Critical Value for a Confidence Level, c P(– zc < z < zc ) = c -zc zc

  9. Find z0.90 such that 90% of the area under the normal curve lies between z-0.90 and z0.90 P(-z0.90 < z < z0.90 ) = 0.90 .90 z0.90 -z0.90

  10. Find z0.90 such that 90% of the area under the normal curve lies between z-0.90 and z0.90 .4500 -z0.90 z0.90 P(0< z < z0.90 ) = 0.90/2 = 0.4500

  11. Find z0.90 such that 90% of the area under the normal curve lies between z-0.90 and z0.90 • According to Table 4 in Appendix I, 0.4500 lies roughly halfway between two values in the table (.4495 and .4505). • Calculating the invNorm(0.05) gives you the critical value of z0.90 = 1.6449.

  12. Common Levels of Confidence and Their Corresponding Critical Values

  13. Confidence Intervalfor the Mean of Large Samples (n ≥ 30)

  14. Confidence Interval for the Mean of Large Samples (n ≥ 30)

  15. Create a 95% confidence interval for the mean driving time between Philadelphia and Boston. Assume that the mean driving time of 64 trips was 5.2 hours with a standard deviation of 0.9 hours.

  16. Key Information

  17. 95% Confidence Interval: We can say with 95% a confidence level that the population mean driving time from Philadelphia to Boston is between 4.9795 and 5.4205 hours.

  18. 95% Confidence Interval: Calculator Computation We can say with a 95% confidence level that the population mean driving time from Philadelphia to Boston is between 4.9795 and 5.4205 hours.

  19. When estimating the mean, how large a sample must be used in order to assure a given level of confidence? Use the formula:

  20. Determine the sample size necessary to determine (with 99% confidence) the mean time it takes to drive from Philadelphia to Boston. We wish to be within 15 minutes of the true time. Assume that a preliminary sample of 45 trips had a standard deviation of 0.8 hours.

  21. ... determine with 99% confidence...

  22. ... We wish to be within 15 minutes of the true time. ... E = 15 minutes or E = 0.25 hours

  23. ...a preliminary sample of 45 trips had a standard deviation of 0.8 hours. Since the preliminary sample is large enough, we can assume that the population standard deviation is approximately equal to 0.8 hours.

  24. Minimum Required Sample Size

  25. Rounding Sample Size Any fractional value of n is always rounded to the next higher whole number.

  26. We would need a sample of 68 trip times to be 99% confidence that the sample mean time it takes to drive from Philadelphia to Boston is within the 0.25 hours of the population mean time it takes to drive from Philadelphia to Boston.

  27. THE END OF THE PRESENTATION

  28. Answers to the Sample Questions

  29. 1. As part of a study on AP test results, a local guidance counselor gathered data on 200 tests given at local high schools. The test results are based on scores of 1 to 5, where a 1 means a very poor test result to a 5 which means a superior test result. The sample mean was 3.62 with a standard deviation of 0.84. a. Construct a 90% confidence interval for the population mean.

  30. We can say with a 90% confidence level that the population mean score on AP tests at local high schools is between 3.5223 and 3.7177.

  31. 1. As part of a study on AP test results, a local guidance counselor gathered data on 200 tests given at local high schools. The test results are based on scores of 1 to 5, where a 1 means a very poor test result to a 5 which means a superior test result. The sample mean was 3.62 with a standard deviation of 0.84. b. Construct a 95% confidence interval for the population mean.

  32. We can say with a 95% confidence level that the population mean score on AP tests at local high schools is between 3.5036 and 3.7364.

  33. 1. As part of a study on AP test results, a local guidance counselor gathered data on 200 tests given at local high schools. The test results are based on scores of 1 to 5, where a 1 means a very poor test result to a 5 which means a superior test result. The sample mean was 3.62 with a standard deviation of 0.84. c. Perform the calculator checks for parts a and b.

  34. 1. Part c - Calculator check for part a

  35. 1. Part c - Calculator check for part b

  36. 1. As part of a study on AP test results, a local guidance counselor gathered data on 200 tests given at local high schools. The test results are based on scores of 1 to 5, where a 1 means a very poor test result to a 5 which means a superior test result. The sample mean was 3.62 with a standard deviation of 0.84. d. How many test results would be require to be 95% confident that the sample mean test score is within 0.05 of the population mean score?

  37. We would need to acquire 1,085 AP test results to have a 95% confidence level with an error of no more than 0.05 for the population mean AP test scores.

  38. 2. The SAT results for 50 randomly selected seniors are listed below. The score are based only on the English and Math portions of the SAT examination. Use your calculator to determine a 99% confidence interval for the mean score of the SAT examination. 980 1240 1380 950 870 1030 1220 750 1410 1150 1280 1100 1070 890 930 1520 810 1090 1310 1030 1190 1370 1200 990 1560 810 940 1010 1140 1060 1060 1250 1240 1130 1170 1080 1210 970 810 920 1080 1160 940 1050 1110 1300 1230 790 1050 1240

  39. Remember that you need perform a 1-VAR-STATS calculation on the data first to get the value for the sample standard deviation.

  40. We can say with a 99% confidence level that the population mean score on the SAT examination of the seniors at a local high school is between 1033.9008 and 1168.8992.

  41. THE END OF SECTION 1

More Related