1 / 8

Test Facility Capabilities EGSE

This overview highlights the capabilities of the EGSE (Electrical Ground Support Equipment) Test Facility, including the Router & Test Equipment Gateway, CDMS Simulator, XY Stage Controller, Test Optic Controller, Environment Monitor & Stimuli Control, and HCSS Interface.

ebourgeois
Download Presentation

Test Facility Capabilities EGSE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Test Facility Capabilities EGSE Erich Wiezorrek, MPE

  2. Erich Wiezorrek, MPE EGSE overview

  3. Erich Wiezorrek, MPE Router & Test Equipment Gateway • Router • distributes PUS (Packet Utilisation Standard)TM & TC packets around the EGSE subsystems • Test equipment gateway • implements PUS handling for the test equipment controllers • distributes TC packets to the corresponding test equipment controller • collects all TM packets from the test equipment controllers

  4. Erich Wiezorrek, MPE CDMS Simulator • implements MIL-STD-1553b communication bus to connect DPU and EGSE • transfers TM packets from DPU to EGSE • transfers TC packets from EGSE to DPU • synchronizes DPU time with its own time • allows selection of several user defined bus lists • no mission time line implemented; TCs for DPU are transferred immediately to DPU after they are received from EGSE

  5. Erich Wiezorrek, MPE XY Stage Controller • allows positioning of external sources (hole mask) via TC • reports all moves via TM packets • for FM ILT also simple pointing rasters will be implemented • for FM ILT XY stage scans to support bolometer testing will be implemented

  6. Erich Wiezorrek, MPE Test Optic Controller • both flip mirrors can be commanded via TC • to switch between internal and external calibration sources • to switch between internal integrating sphere and internal black bodies • chopper wheel can be commanded via TC to select one of the two internal black bodies • chopper wheel can be commanded via TC to rotate with a selectable frequency to regularly switch between the internal black bodies • periodic TM packets to report status • “event” TM packets whenever chopper wheel passes fixed hall sensors

  7. Erich Wiezorrek, MPE Environment monitor & Stimuli control • regular HK TM reports from • several temperatures inside the cryostat • pressure of the cryostat and the gas cell • liquid level measurements for N2 and He • status, set point, actual temperature and heating power for both internal black bodies • set point for internal black bodies can be set via TC

  8. Erich Wiezorrek, MPE HCSS Interface • TM packets together with decompressed dataframes will be stored in the HCSS database • Test procedures will call for predefined CUS observations • CUS generated TC sequences will be executed by the TestControl/TOPE system • “Data processing” users will be able to fetch data associated with a test execution or a CUS observation via a browser interface • OOL and TC history will be fetched from SCOS and ingested into the database

More Related