1 / 116

PARTIAL DERIVATIVES

14. PARTIAL DERIVATIVES. PARTIAL DERIVATIVES. So far, we have dealt with the calculus of functions of a single variable. However, in the real world, physical quantities often depend on two or more variables. PARTIAL DERIVATIVES. So, in this chapter, we:

dympna
Download Presentation

PARTIAL DERIVATIVES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 14 PARTIAL DERIVATIVES

  2. PARTIAL DERIVATIVES • So far, we have dealt with the calculus of functions of a single variable. • However, in the real world, physical quantities often depend on two or more variables.

  3. PARTIAL DERIVATIVES • So, in this chapter, we: • Turn our attention to functions of several variables. • Extend the basic ideas of differential calculus to such functions.

  4. PARTIAL DERIVATIVES 14.1 Functions of Several Variables • In this section, we will learn about: • Functions of two or more variables • and how to produce their graphs.

  5. FUNCTIONS OF SEVERAL VARIABLES • In this section, we study functions of two or more variables from four points of view: • Verbally (a description in words) • Numerically (a table of values) • Algebraically (an explicit formula) • Visually (a graph or level curves)

  6. FUNCTIONS OF TWO VARIABLES • The temperature T at a point on the surface of the earth at any given time depends on the longitude x and latitude y of the point. • We can think of T as being a function of the two variables x and y, or as a function of the pair (x, y). • We indicate this functional dependence by writing: T = f(x, y)

  7. FUNCTIONS OF TWO VARIABLES • The volume V of a circular cylinder depends on its radius r and its height h. • In fact, we know that V = πr2h. • We say that V is a function of r and h. • Wewrite V(r, h) = πr2h.

  8. FUNCTION OF TWO VARIABLES • A function f of two variables is a rule that assigns to each ordered pair of real numbers (x, y) in a set D a unique real number denoted by (x, y). • The set D is the domain of f. • Itsrange is the set of values that f takes on, that is, {f(x, y) | (x, y) D}

  9. FUNCTIONS OF TWO VARIABLES • We often write z =f(x, y) to make explicit the value taken on by f at the general point (x, y). • The variables x and y are independent variables. • z is the dependent variable. • Compare this with the notation y =f(x) for functions of a single variable.

  10. FUNCTIONS OF TWO VARIABLES • A function of two variables is just a function whose: • Domain is a subset of R2 • Range is a subset of R

  11. FUNCTIONS OF TWO VARIABLES • One way of visualizing such a function is by means of an arrow diagram, where the domain D is represented as a subset of the xy-plane.

  12. FUNCTIONS OF TWO VARIABLES • If a function f is given by a formula and no domain is specified, then the domain of fis understood to be: • The set of all pairs (x, y) for which the given expression is a well-defined real number.

  13. FUNCTIONS OF TWO VARIABLES Example 1 • For each of the following functions, evaluate f(3, 2) and find the domain. • a. • b.

  14. FUNCTIONS OF TWO VARIABLES Example 1 a • The expression for f makes sense if the denominator is not 0 and the quantity under the square root sign is nonnegative. • So, the domain of f is: D = {(x, y) |x +y + 1 ≥ 0, x ≠ 1}

  15. FUNCTIONS OF TWO VARIABLES Example 1 a • The inequality x + y + 1 ≥ 0, or y ≥ –x – 1, describes the points that lie on or above the line y = –x – 1 • x ≠ 1 means that the points on the line x = 1 must be excluded from the domain.

  16. FUNCTIONS OF TWO VARIABLES Example 1 b • f(3, 2) = 3 ln(22– 3) = 3 ln 1 = 0 • Since ln(y2– x) is defined only when y2– x > 0, that is, x < y2, the domain of f is: D = {(x, y)| x <y2

  17. FUNCTIONS OF TWO VARIABLES Example 1 b • This is the set of points to the left of the parabola x = y2.

  18. FUNCTIONS OF TWO VARIABLES • Not all functions are given by explicit formulas. • The function in the next example is described verbally and by numerical estimates of its values.

  19. FUNCTIONS OF TWO VARIABLES Example 2 • In regions with severe winter weather, the wind-chill index is often used to describe the apparent severity of the cold. • This index W is a subjective temperature that depends on the actual temperature T and the wind speed v. • So, W is a function of T and v, and we can write: W =f(T, v)

  20. FUNCTIONS OF TWO VARIABLES Example 2 • The following table records values of W compiled by the NOAA National Weather Service of the US and the Meteorological Service of Canada.

  21. FUNCTIONS OF TWO VARIABLES Example 2

  22. FUNCTIONS OF TWO VARIABLES Example 2 • For instance, the table shows that, if the temperature is –5°C and the wind speed is 50 km/h, then subjectively it would feel as cold as a temperature of about –15°C with no wind. • Therefore, f(–5, 50) = –15

  23. FUNCTIONS OF TWO VARIABLES Example 3 • In 1928, Charles Cobb and Paul Douglas published a study in which they modeled the growth of the American economy during the period 1899–1922.

  24. FUNCTIONS OF TWO VARIABLES Example 3 • They considered a simplified view in which production output is determined by the amount of labor involved and the amount of capital invested. • While there are many other factors affecting economic performance, their model proved to be remarkably accurate.

  25. FUNCTIONS OF TWO VARIABLES E. g. 3—Equation 1 • The function they used to model production was of the form P(L, K) = bLαK1–α

  26. FUNCTIONS OF TWO VARIABLES E. g. 3—Equation 1 • P(L, K) = bLαK1–α • P is the total production (monetary value of all goods produced in a year) • L is the amount of labor (total number of person-hours worked in a year) • K is the amount of capital invested (monetary worth of all machinery, equipment, and buildings)

  27. FUNCTIONS OF TWO VARIABLES Example 3 • In Section 14.3, we will show how the form of Equation 1 follows from certain economic assumptions.

  28. FUNCTIONS OF TWO VARIABLES Example 3 • Cobb and Douglas used economic data published by the government to obtain this table.

  29. FUNCTIONS OF TWO VARIABLES Example 3 • They took the year 1899 as a baseline. • P, L, and K for 1899 were each assigned the value 100. • The values for other years were expressed as percentages of the 1899 figures.

  30. FUNCTIONS OF TWO VARIABLES E. g. 3—Equation 2 • Cobb and Douglas used the method of least squares to fit the data of the tableto the function P(L, K) = 1.01L0.75K0.25 • See Exercise 75 for the details.

  31. FUNCTIONS OF TWO VARIABLES Example 3 • Let’s use the model given by the function in Equation 2 to compute the production in the years 1910 and 1920.

  32. FUNCTIONS OF TWO VARIABLES Example 3 • We get: • P(147, 208) = 1.01(147)0.75(208)0.25≈ 161.9 • P(194, 407) = 1.01(194)0.75(407)0.25≈ 235.8 • These are quite close to the actual values, 159 and 231.

  33. COBB-DOUGLAS PRODN. FUNCN. Example 3 • The production function (Equation 1) has subsequently been used in many settings, ranging from individual firms to global economic questions. • It has become known as the Cobb-Douglas production function.

  34. COBB-DOUGLAS PRODN. FUNCN. Example 3 • Its domain is: {(L, K) | L ≥ 0, K ≥ 0} • This is because L and K represent labor and capital and so are never negative.

  35. FUNCTIONS OF TWO VARIABLES Example 4 • Find the domain and range of: • The domain of g is: D = {(x, y)| 9 – x2 – y2 ≥ 0} = {(x, y)| x2 + y2≤ 9}

  36. FUNCTIONS OF TWO VARIABLES Example 4 • This is the disk with center (0, 0) and radius 3.

  37. FUNCTIONS OF TWO VARIABLES Example 4 • The range of g is: • Since z is a positive square root, z ≥ 0. • Also,

  38. FUNCTIONS OF TWO VARIABLES Example 4 • So, the range is: {z| 0 ≤z ≤ 3} = [0, 3]

  39. GRAPHS • Another way of visualizing the behavior of a function of two variables is to consider its graph.

  40. GRAPH • If f is a function of two variables with domain D, then the graph of f is the set of all points (x, y, z) in R3 such that z =f(x, y) and (x,y) is in D.

  41. GRAPHS • Just as the graph of a function f of one variable is a curve C with equation y = f(x), so the graph of a function f of two variables is: • A surface S with equation z =f(x, y)

  42. GRAPHS • We can visualize the graph S of f as lying directly above or below its domain Din the xy-plane.

  43. GRAPHS Example 5 • Sketch the graph of the function f(x, y) = 6 – 3x – 2y • The graph of f has the equation z = 6 – 3x – 2y or 3x + 2y +z = 6 • This represents a plane.

  44. GRAPHS Example 5 • To graph the plane, we first find the intercepts. • Putting y =z = 0 in the equation, we get x = 2 as the x-intercept. • Similarly, the y-intercept is 3 and the z-intercept is 6.

  45. GRAPHS Example 5 • This helps us sketch the portion of the graph that lies in the first octant.

  46. LINEAR FUNCTION • The function in Example 5 is a special case of the function • f(x, y) = ax +by +c • It is called a linear function.

  47. LINEAR FUNCTIONS • The graph of such a function has the equation • z =ax +by +c • or • ax +by –z +c = 0 • Thus, it is a plane.

  48. LINEAR FUNCTIONS • In much the same way that linear functions of one variable are important in single-variable calculus, we will see that: • Linear functions of two variables play a central role in multivariable calculus.

  49. GRAPHS Example 6 • Sketch the graph of • The graph has equation

  50. GRAPHS Example 6 • We square both sides of the equation to obtain: z2 = 9 – x2 – y2or x2 + y2 +z2 = 9 • We recognize this as an equation of the sphere with center the origin and radius 3.

More Related