GeoPak Ver. 08.08.02.73 Update - PowerPoint PPT Presentation

duc
geopak ver 08 08 02 73 update n.
Skip this Video
Loading SlideShow in 5 Seconds..
GeoPak Ver. 08.08.02.73 Update PowerPoint Presentation
Download Presentation
GeoPak Ver. 08.08.02.73 Update

play fullscreen
1 / 41
Download Presentation
110 Views
Download Presentation

GeoPak Ver. 08.08.02.73 Update

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. GeoPak Ver. 08.08.02.73 Update 08.08.03.24

  2. New Criteria Enhancements since last year. Back Slope Override line can now be used with Back Slope Constraint Line. • Using Backslope Override and the Backslope Constraint Line(BCL) together on a section will hold the back slope and vary the ditch width. • All other override lines do not work with Backslope Constraint Line.

  3. New Criteria Enhancements since last year. Back Slope Override line can now be used with Back Slope Constraint Line.

  4. New Criteria Enhancements since last year. Back Slope Override line can now be used with Back Slope Constraint Line.

  5. New Criteria Enhancements since last year. Back Slope Override line can now be used with Back Slope Constraint Line.

  6. New Criteria Enhancements since last year. Back Slope Override line can now be used with Back Slope Constraint Line. Live Demo T:\de-proj\D\Typicals1\data\pattern_shape.dgn

  7. New Criteria Enhancements since last year.Slope Bench Override line now supports 5 benches . • The two additional benches were added to adhoc attributes in the D&C item .

  8. New Criteria Enhancements since last year.Slope Bench Override line now supports 5 benches . Live Demo T:\de-proj\D\Typicals3\data\pattern_shape.dgn

  9. New Criteria Enhancements since last year.Ditch Alignments. The adhoc attributes associated with this D&C entry instructs the criteria what values to use when drawing a ditch alignment. There are two requirements for controlling the toe of ditch in this special situation: "Chain Name" - Name of COGO Chain previously stored representing the inside toe of ditch. The stationing of this chain must match the stationing of the profile. "Profile Name" - Name of COGO Profile previously stored representing the inside toe of ditch. The stationing of this profile must match the stationing of the chain.

  10. New Criteria Enhancements since last year.Ditch Alignments. Live Demo T:\de-proj\D\Typicals3\data\pattern_shape.dgn Chain and Profile Name = Ditch2

  11. New Criteria Enhancements since last year.Edge of Shoulder. • This update allows for the use of adhocs in the shoulder line to specify the slope or to taper the slope. • Updated D&C items to contain adhoc attributes: • EOS Aggregate • EOS Asphalt • EOS Concrete • EOS Earth

  12. New Criteria Enhancements since last year.Berm Slope Override Line • Added functionality of following shoulder slope by entering -100 for slope.

  13. New Criteria EnhancementsNew Help File Format (HTML Based) ~ This enhancement will involve the conversion of the current help files to HTML driven help files, this will include several tasks: • Consolidation of all current WRI help files to the following categories: New construction, Rehab, Existing features, Right of Way Labeling, Sub layers, Paved ditch. • Creation of detailed instructive adhoc attribute image files to demonstrate the requirements for all adhoc attributes. • Creating a link to adhoc attribute image files to the D&C Adhoc Help option.

  14. New Criteria EnhancementsNew Help File Format (HTML Based) ~ • There are at least three ways to get to the new Help. • Typical Section Generator • D&C Manager items with Adhocs • Wiki And even this PowerPoint!!!

  15. New Criteria EnhancementsNew Help Format (HTML Based) ~ Live Demo

  16. New Criteria EnhancementsEdge of Pavement/Shoulders • Edges of proposed pavements and shoulders now use adhoc attributes to establish the thickness of their structure over-riding the settings from the redefinable variables. • Rock fill base daylight option is now set via an adhoc attribute on the proposed edge of pavement allowing for complete independent control on each side of the pavement. • Proposed shoulder slopes may now be set manually via adhoc attributes over-riding the automated computed roll over slope. • Aggregate Extension option is new - defaults to Zero unless User specifies other.

  17. New Criteria EnhancementsEdge of Pavement/Shoulders

  18. New Criteria EnhancementsEdge of Pavement/Shoulders

  19. New Criteria EnhancementsEdge of Pavement/Shoulders Live Demo T:\de-proj\D\Typicals3\data\plan-Old.dgn Rename to plan.dgn

  20. New Criteria EnhancementsLevees. ~ • Draws Station and Offset information on the outer limits of the Levee.

  21. New Criteria EnhancementsLevees. ~ • Levee limits may now be drawn to plan view using the appropriate adhoc attribute settings..

  22. New Criteria EnhancementsRetaining Walls. ~ • Wall name adhoc attribute has been added to both the cut and fill wall to fix a problem with the profile grade report. TOW_RTE179LT TOWF_RTE179LT

  23. New Criteria EnhancementsCross Over Designator Line. ~ • Drawing this "Cross Over Designator" line in the "GEOPAK Lines DGN" file in the middle of the proposed paved cross over allows the user the ability to place a paved cross over on their cross section. • There are three types of Cross Overs • I for intersecting opposing pavement slopes • C for issuing a straight connection between the two pavement sections • Chain and Profile Just Added - D2 Request

  24. New Criteria EnhancementsCross Over Designator Line. ~ Live Demo T:\de-proj\D\Typicals6\data\Pattern_Shape8.dgn

  25. New Criteria EnhancementsRaised Median ~ • Raised median strips are now supported in a pavement cross over environment. • Median strip can be full depth pavement or overlay the existing pavement.

  26. New Criteria EnhancementsRaised Median ~ Live Demo T:\de-proj\D\Typicals6\data\Pattern_Shape8.dgn

  27. New Criteria EnhancementsReconstruction ~ • Reconstruction Typical – operates different now, use an Overlay Limit Line draw in Pattern Shape File. • The Reconstruction Typical Section will draw overlay and widening cross sections. • Proposed pavement shapes are required for all types of proposed overlay including match existing cross slope overlay projects • If not using the profile to correct longitudinally, the profile should be close to the existing ground.

  28. New Criteria EnhancementsReconstruction ~ • A minimum of two proposed overlay limit lines are required to be found at each cross section in the Pattern Shape file. If these lines are not present, the typical section will default back to new construction. • The midpoint of the proposed shape cluster MUST be between two overlay limit lines. • A proposed edge of pavement beyond the overlay limit line MUST be drawn in the proposed plan view for widening to be drawn.

  29. New Criteria EnhancementsReconstruction ~2 • The lines drawn by the proposed pavement shapes on to the proposed cross sections should be deleted after the completion of the proposed cross section run. Just Added – D6 Request

  30. New Criteria EnhancementsReconstruction ~2 Live Demo T:\de-proj\D\Typicals11\data\Pattern_Shape8.dgn

  31. New Criteria EnhancementsPaved approaches ~ • This enhancement adds support for paved approached. The paved approach is similar to an entrance but with slightly different design standards.

  32. New Criteria EnhancementsPaved approaches ~ Live Demo T:\de-proj\D\Typicals8\data\Plan.dgn

  33. New Criteria EnhancementsSidewalks ~2 • All sidewalk variables are now controlled by adhoc attributes. • Berm lines past a sidewalk will now be controlled by adhoc (not plan graphic Berm Line).

  34. New Criteria EnhancementsSidewalks ~2 Live Demo T:\de-proj\D\Typicals8\data\Plan.dgn

  35. New Criteria EnhancementsEdge of Pavement ~ • Chain names and profile names are now supported for edges of proposed pavements and shoulders. • Multiple proposed edges of pavement are now supported to allow for pavement warping. • This enhancement allows the warping of the cross slope of the pavement or shoulder. In essence the computed cross slope of the pavement will be over-ridden forcing the cross slope to adjust to the specified chain and profile.

  36. New Criteria EnhancementsEdge of Pavement ~ • "Chain Name" - Optional chain name used to warp the pavement. This is used when the pavement is widened beyond the edge of the proposed pavement shapes. If no profile and chain are specified, the cross slope of the pavement shape will be continued. If however, a profile and chain are specified, the pavement cross slope will be adjusted to draw to the chain and profile. This is very useful at side-road entrances. The chain stationing MUST match the stationing of the corresponding profile name. • "Profile Name" - Optional profile name used to warp the pavement. This is used when the pavement is widened beyond the edge of the proposed pavement shapes. If no profile and chain are specified, the cross slope of the pavement shape will be continued. If however, a profile and chain are specified, the pavement cross slope will be adjusted to draw to the chain and profile. This is very useful and side-road entrances. The profile stationing MUST match the stationing of the corresponding chain name.

  37. New Criteria EnhancementsEdge of Pavement ~ Live Demo T:\de-proj\D\Typicals12\data\Plan.dgn

  38. New Criteria EnhancementsExisting Ground • Chuck Lawson added a trap to the Criteria so if the user does not use the proper symbology for the existing ground, a prompt error will occur. • He stated that he has found this to be very effective

  39. New GeoPak Add-OnCross Section Movie~ • Provides tools to navigate through cross sections similar to Cross Section Navigator but with a movie mode that flips through cross sections at a specified frame rate. • The cross sections can also be centered in the view in relation to a profile elevation.

  40. New GeoPak Add-OnCross Section Movie~ Live Demo T:\de-proj\D\

  41. GeoPak Ver. 08.08.03.24 Update