1 / 28

Interconnect Modeling for Improved System-Level Design Optimization

This paper discusses the motivation, challenges, and solutions for accurate interconnect modeling in system-level design optimization. It explores communication synthesis, buffered interconnect models, interconnect optimization, and validation. The goal is to develop accurate models that can be easily used by system-level designers early in the design cycle.

drutledge
Download Presentation

Interconnect Modeling for Improved System-Level Design Optimization

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Interconnect Modeling for Improved System-Level Design Optimization Luca Carloni§ Andrew B. Kahng¶ Swamy Muddu ¶ Alessandro Pinto‡ Kambiz Samadi ¶ Puneet Sharma ¶ § Columbia University ¶ University of California, San Diego ‡ University of California, Berkeley January 22, 2008

  2. Outline • Motivation • System-Level Communication Synthesis • Buffered Interconnect Model • Interconnect Optimization • Validation and Significance Assessment • Conclusions

  3. Motivation • Focus of design process is shifting from “computation” to “communication” • Device and interconnect performance scaling mismatches cause breakdown of traditional across-chip communication • System-level designers require accurate, yet simple models to bridge planning and implementation stages • Today’s system-level performance, power modeling suffers: • Ad hoc selection of models • Poor balance between accuracy and simplicity • Poor definition of inputs • Lack of model extensibility across future technology nodes • Inability to explore different implementation styles Our Goal: Develop accurate models that are easily usable by system-level design early in the design cycle

  4. Previous Interconnect Delay Models • Missing required aspects of accurate delay estimation  90nm • Do not consider input slew change, which impacts effective drive resistance and consequently cell delay • Do not consider scattering, which impacts metal resistivity and consequently metal resistance • Bakoglu90 • No crosstalk impact, assumes driver on-resistance Rd, gate input capacitance Cgvary linearly with device size, uses Elmore delay model • Pamunuwa03 • Similar to Bakoglu90 but adds crosstalk impact • CongPan99 (IPEM) • Multiple delay models under certain optimization schemes • Use of second-order RC model for gate delay (e.g., Shao03) • Does not address gate loading during model construction

  5. Other Limitations of Previous Work • Design style and buffering schemes • Design-level degrees of freedom: wire width, spacing, shielding • Practical buffer sizing • Only consider the delay as optimization objective = wrong • Analytic solutions have large buffer sizes (100X-400X) which are not in any realistic cell library • Model inputs and technology capture • Do not have well-defined pathways to capture necessary technology and device parameters • Collect inputs from ad hoc sources, which often leads to misleading conclusions

  6. Outline • Motivation • System-Level Communication Synthesis • Buffered Interconnect Model • Interconnect Optimization • Validation and Significance Assessment • Conclusions

  7. Communication Synthesis for Network-on-Chip • Given • An input specification as a set of communication constraints • A library of communication components • An objective function (e.g., power, area, delay) • Find • A network-on-chip implementation as a composition of library components that • Satisfies the specification • Minimizes the cost function • Communication Synthesis Infrastructure (COSI) • Based on the Platform-Based Design methodology • Takes specification and library descriptions in XML format • Produces a variety of outputs , including a cycle accurate SystemC implementation of the optimal network-on-chip

  8. Point-to-Point Specification On-Chip Communication Library Synthesis Result Constraint-Driven Communication Synthesis Perf. / Cost Abstractions Constraints Propagation Application Implementation Synthesis

  9. Communication Synthesis Key Elements • Specification of input constraints • Set of IP cores: area and interface • End-to-end communication requirements between pairs of IP cores: latency and throughput • Characterization of library of components • Interface types, max number of ports • Max capacities: bandwidth, latency, max distance • Performance and cost model • Component instantiation and parallel composition • Rename, set parameters of library components • Composition based on algebra on quantities (including type compatibility)

  10. Platform Instance 2 Platform Instance 1 Communication Synthesis Example • Synthesis of optimal network-on-chip • Return valid composition that meets input constraints and • Minimizes the objective function (e.g., power dissipation) (Original Specification)

  11. COSI: Communication Synthesis Infrastructure • COSI is a public-domain software package for NoC synthesis http://embedded.eecs.berkeley.edu/cosi/

  12. Outline • Motivation • System-Level Communication Synthesis • Buffered Interconnect Model • Interconnect Optimization • Validation and Significance Assessment • Conclusions

  13. Tech. Characteristics • # metal layers • min. width, spacing, thickness • dielectric thickness, constant • device drive res, cap, leakage Delay Design Style Area • width/spacing configs • buffering scheme • shielding • signaling scheme Proposed Model Leakage Bus Attributes • length, # bits, layer, switching Dynamic Max. unclocked length, # pipelines, latency, throughput Proposed Model Features • Improved accuracy with respect to well-known models • Modeling of nanoscale-era effects: crosstalk, scattering, barrier thickness, dependence of delay on slews, etc. • Single-digit percentage accuracy relative to gate-level analyses

  14. Model Technology Inputs • Inputs for repeater delay calculation • Delay and slew values for a set of input slew and load capacitance values (obtained from Liberty / Timing Library Formats (TLF) / SPICE) • Input capacitance for different repeater size (Liberty, Predictive Technology Models (PTM)) • Inputs for wire delay calculation • Wire dimensions (ITRS/PTM, LEF, ITF) • Inter-wire spacings for global and intermediate layers (ITRS/PTM, LEF, ITF) • Inputs for power calculation • Input capacitance (Liberty, PTM) • Wire parasitics (computed in wire delay calculation) • Inputs for area calculation • Wire dimensions used above • Repeater area is available from Liberty and for future technologies, ITRS A-factors or proposed area models can be used

  15. Buffered Interconnect Model • Buffered interconnect model for delay, power, and area • Constructed from: buffer (repeater) and wire delay models • Accounts for coupling capacitances, slew dependence and UDSM effects (e.g., scattering-dependent wire resistance changes) • Calibrated against SPICE • Components: • Repeater delay model • Separate models for intrinsic delay, output slew, input capacitance • Wire delay model • Accounts for coupling capacitance impact on wire delay • Repeater power model • Accounts for sub-threshold and gate leakages • Repeater area model • Derived from existing cell layouts (can be extrapolated) • Wire area model • Derived from wire width and spacing (can be extrapolated)

  16. Repeater Delay Model • Repeater delay can be decomposed into load independent (i) and load dependent (rd.cl) components: d = i + rd.cl i(si) = α0 + α1.s1 + α2.si2 • si denotes input slew; α0, α1 and α2 are the coefficient by quadratic regression • Drive resistance is nearly linear with input slew; also both the intercept and slope vary with repeater size rd = rd0 + rd1.si • Output slew depends on load capacitance; slope is independent of input slew, while intercept depends linearly on it so(cl , si) = so0 + s01.si + so2.cl • so is the output slew, and so0, so1 and so2 are the fitting coefficients from linear regression • ci is the input capacitance, wp, wn are PMOS and NMOS widths respectively, and η is a coefficient derived using linear regression with zero intercept ci = η× (wp + wn)

  17. Wire Delay Model • For wire delay we use the model proposed by Pamunuwa et al. (cf. TVLSI03) which accounts for cross-talk • dw, rw, cg, cc, and ci respectively denote wire delay, wire resistance, ground capacitance, coupling capacitance and input capacitance of the next-stage repeater • λi is a coefficient (i.e., based on SPICE simulation) due to switching patterns of the neighboring wires dw= rw.(0.4cg + (λi.cc)/2 + 0.7ci) • We enhance the quality of the wire delay model by considering two other important factors that change wire resistance: • Scattering-aware resistivity (cf. Shi et al.ASPDAC06): ρ(w) = ρB + Kρ/ww • ww is the wire width, ρB=2.202 µΩ.cm, and Kρ=1.030×10-15Ω.m2 • Interconnect barrier (cf. Mai et al. IEEE01) • tm, tb respectively are the metal and barrier thicknesses, lw is the length of the wire, and ρ is computed using the above equation rw = (ρ.lw) / (tm - tb).(ww - 2tb)

  18. Repeater and Wire Delay Models • Model coefficient fit from data extracted from Liberty/LEF/Tech. files and other extrapolatable sources (i.e., PTM and ITRS) Intrinsic Delay Model – i(slewin) Drive Resistance Model – r(slewin) • delay = i(slewin) + r(slewin) * CL • r(s) = f(size, slewin) • slewout = f(slewin,CL) • wire delay = Elmore Output Slew Model – o(slewin, CL)

  19. Repeater and Wire Power Models • Power is an important design objective and must be accounted for early in the design flow • Today, leakage and dynamic power are primary forms of power dissipation • Leakage has two main components: (1) sub-threshold leakage, and (2) gate-tunneling current • Both components depend linearly on device size ps= (psn + psp) / 2 psn = k0n + k1n.wn psp = k0p+ k1p.wp • Dynamic power can be calculated as: pd = a.cl.vdd2.f cl = ci + cg + cc • pd, a, cl, vdd and f are dynamic power, activity factor, load capacitance, supply voltage and frequency, respectively • Load capacitance is composed of the input capacitance of the next repeater (ci), ground (cg) and coupling (cc) capacitances of the wire driven

  20. Repeater and Wire Area Models • For existing technologies, the area of a repeater can be calculated as: ar = τ0 + τ1.wn • ardenotes repeater area, τ0and τ1 are coefficients using linear regression; wnand wp are widths of NMOS and PMOS, respectively • For future technologies, feature size (F), contacted pitch (CP), row height (RH), and row width (RW) can be used to estimate the area: NF = (wp + wn + 2.F) / RH RW = NF × (F + CP) + CP ar = RH × RW • Wiring area can be calculated as: aw = n × (ww + sw) + sw • aw denotes wire area, n is the bit width of the bus, and ww and sw are wire width and spacing

  21. Repeater Power and Area Models • Repeater area and power models fit from simulation data points • Area and leakage power are linear over the range of implementable repeater sizes (larger repeater sizes  higher leakage power)

  22. Outline • Motivation • System-Level Communication Synthesis • Buffered Interconnect Model • Interconnect Optimization • Validation and Significance Assessment • Conclusions

  23. Interconnect Optimization: Buffering • Conventional delay-optimal buffering  unrealistic buffer sizes  high dynamic / leakage power  suboptimal • Our approach: iterative optimization of hybrid objective (power + delay) • Search for optimal number and size of repeaters • Can be extended for other interconnect optimizations (e.g., wire sizing and driver sizing) Pareto-optimal frontier of the power-delay tradeoff of a 5mm interconnect in 90nm / 65nm

  24. Outline • Motivation • Communication Synthesis • Buffered Interconnect Model • Interconnect Optimization • Validation and Significance Assessment • Conclusions

  25. Model Validation • Model comparison with results from physical implementation • {5mm wire} X {90nm, 65nm} X {wiring layers} X {design styles} • Model-predicted delays compared with delays from PrimeTime Deviation of proposed model from PrimeTime delays < 15%

  26. Impact on System-Level Design • Testcases • VPROC: video processor with 42 cores and 128-bit datawidth • dVOPD: dual video object plane decoder with 26 cores and 128-bit datawidth • Original model (Orig.)underestimates power compared to the Proposed Model (Prop.) • Original Model is very optimistic in delay (i.e. the synthesis result may be actually infeasible). • This could become more critical as technology scales and the chip size becomes larger than the critical sequential length.

  27. Outline • Motivation • System-Level Communication Synthesis • Buffered Interconnect Model • Interconnect Optimization • Validation and Significance Assessment • Conclusions

  28. Conclusions and Future Directions • Accurate models can drive effective system-level exploration • Inaccurate models can lead to misleading design targets • Reproducible methodology for extracting inputs to models from reliable sources • More realistic buffering scheme, where power and area are considered in addition to delay • Modeling of NoC components besides wires • Across future nanometer technologies (45nm and beyond) • At different levels of abstractions • protocol encapsulation (e.g., hand-shaking for AMBA bus allocation) • buses, pipelined rings (e.g. EIB in IBM Cell) • routers, network interfaces • FIFOs, queues, crossbar switches (where ORION left off) • from high-level analytical models to low-level executable models • Extending to other metrics • Reliability estimation (i.e., error probability of transmission over wires)

More Related