1 / 24

CIVL 114 Civil Engineering Drawing

CIVL 114 Civil Engineering Drawing. Topic 7 Concrete blocks Setting lineweight and printing. Outline. Seawall blocks drawing Front elevation Side elevation Before Printing Use a suitable linetype scale Assign appropriate lineweights Set up the plot details Reference reading

donaldm
Download Presentation

CIVL 114 Civil Engineering Drawing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CIVL 114Civil Engineering Drawing Topic 7 Concrete blocks Setting lineweight and printing

  2. Outline • Seawall blocks drawing • Front elevation • Side elevation • Before Printing • Use a suitable linetype scale • Assign appropriate lineweights • Set up the plot details • Reference reading • Homework

  3. Seawall blocks drawing

  4. To draw the front elevation • Format – Layer – Layer properties manager • Prepare layers for center, hidden and dimension lines; use appropriatelinetypesand ltscale Details of the icon - refer to textbook

  5. To draw the front elevation • Draw 2700 by 1350 rectangle; • OFFSET to inside by 40 (all chamfers: 40mm); (Modify – Offset) • Connect corners with lines

  6. To draw the front elevation • EXPLODEand OFFSET the left edge by 100 for the hole; (Modify – Explode)

  7. To draw the front elevation • Put it on the hidden line layer • Set the linetype and linetype scale as follows: • Format – Linetype – Global scale factor • LTSCALE (short cut : lts)

  8. Shift + Right Click To draw the front elevation • To draw the (left) center line: • try LINE – (use FROM snap mode; by Shift+Right click) – • From Basepoint: (pick top left corner) • <Offset>: @ 800,0 • Specify next point: @ -300,-1350

  9. To draw the front elevation • Put it on the center line layer • SCALE the center line by 1.2 (Modify – Scale)

  10. To draw the front elevation • MIRROR everything on the left to the right

  11. To draw the side elevation • Turn on both OSNAP and OTRACK for object tracking • RECTANG • Without clicking, touch the top right corner and move mouse to the right (dashed line appears; see below) • Enter 1000 (or other suitable separation) • Specify other corner point: @ 2025, -1350

  12. To draw the side elevation • Modify - CHAMFER – specify both chamfer distances as 40 – enter P (polyline option) – pick the rectangle in side view **CHAMFER: similar to FILLET but bevels the edges rather than round them **

  13. Before Printing Use a suitable linetype scale • Check your original drawing limits using the LIMITS command: they are from (0,0) to (a,b) (e.g. a = 12, b = 9) • Check the dimensions (AxB) of your paper, in mm (e.g. 297x210 for A4 or 420x297 for A3 paper) • What scale is to be used, 1:S (e.g. S = 50 for 1: 50 scale) • Approximately, the linetype scale should be (A/a)xS(e.g. 297/12x50). This is set in Format – Linetype Scale (for the Global Scale Factor)

  14. Before PrintingUse appropriate lineweights • Choose File – Plot Style Manager (the following table appears)

  15. Before PrintingUse appropriate lineweights • Double click “acad.ctb”(a file which stores the lineweight information by color) - click “Form View” tab and the menu appears:

  16. Before PrintingUse appropriate lineweights • Select the color that you used for each line type when creating the drawing. e.g. you may have used red (color 1) for all center lines; purple (color 6) for hidden lines, blue (color 5) for steel bars, black (color 7) for solid lines (title block and concrete outline, etc.). • Assign the appropriate lineweight for each color (e.g. 1mm for blue, 0.5 mm for black, etc.) – Save & Close.

  17. Set up the plot details File – Page Setup Manager(the Page Setup Manager menu appears)

  18. Set up the plot details • Select “*Model*” and click “Modify…”, then the following menu appears:

  19. Set up the plot details • For Plot style table, choose acad.ctb – Yes to use the lineweightes you assigned • Choose Printer/plotter (e.g. BarnCL5) and Paper size (usually A3) • In Plot Area, choose what to plot (e.g. by window & choose corners of title block) • Plot scale: • Check “Fit to paper” if scale is unimportant (e.g. just a rough draft) • If a scale is specified, then uncheck “Fit to paper” • Suppose scale is 1:50 (meaning: 1 mm on paper will represent 50 mm of actual object), while drawing dimensions are in mm. • Choose “1:50” directly or choose “Custom” and set 1 mm (on paper) = 50 units (on drawing) • In “Plot offset”, select “Center the plot” • Always Preview: change the orientation to Portrait or Landscape if needed (right-click - Exit to exit preview). Click “OK” – “Close” if all is OK.

  20. Homework • Draw 1:1 (using the given dimensions in mm) on AutoCAD • Print at 1:50 scale on A3 paper (put both the two types of blocks on the same drawing) • Use proper lineweight as discussed in first lecture

  21. Homework

  22. Homework

  23. Homework

More Related