Download
connect release 2 2 linux install webinar n.
Skip this Video
Loading SlideShow in 5 Seconds..
CONNECT: Release 2.2 Linux Install Webinar PowerPoint Presentation
Download Presentation
CONNECT: Release 2.2 Linux Install Webinar

CONNECT: Release 2.2 Linux Install Webinar

127 Views Download Presentation
Download Presentation

CONNECT: Release 2.2 Linux Install Webinar

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. CONNECT:Release 2.2 Linux Install Webinar

  2. Overview and Assumptions Overview The following webinar describes the single server installation of CONNECT 2.2 on a Linux platform. The install various snapshots of the terminal as well as highlights key points in the install. Assumptions • You have acquired a machine that meets the Hardware Requirements defined in section 5.1 of the Linux Full Binary System Installation and Configuration Manual • You have root privileges or can sudo on this machine • You have a CONNECT Community Portal • You have an understanding of UNIX commandsManuals To install the CONNECT 2.2 Linux install you’ll need to download the following Installation and Configuration Manual from the Connect Open Source website: http://www.connectopensource.org/download/attachments/24182891/CONNECT_Linux_Release_2_2_System_Installation_and_Configuration_Full_Binary.pdf?version=1 This webinar is a supplement to the Installation Manual. The documentation has details this presentation does not have.

  3. Things to Remember • This installation is designed for Red Hat Enterprise Linux 5 (32-bit) • The installation will create a glassfish user to run glassfish application server and CONNECT applications • Some commands require root user. Use “su” command to open shell as root or use “sudo” to run the commands • This installation will create a /nhin folder. Depending on your disk size and partitioning, you may wish to create a separate partitition for this data. • In this particular install, the machine used is named DNOCC7201

  4. Initial Setup: make folder and add user • Step 6.2.1: Make the /nhin directory • Step 6.2.2-6.2.3: Create the glassfish user and set permissions

  5. Initial Setup: make folder and add user [root@dnocc7201:~]# mkdir /nhin [root@dnocc7201:~]# groupadd glassfish [root@dnocc7201:~]# useradd -g glassfish -d /nhin glassfish useradd: warning: the home directory already exists. Not copying any file from skel directory into it. [root@dnocc7201:~]# passwd glassfish Changing password for user glassfish. New UNIX password: BAD PASSWORD: it is based on a dictionary word Retype new UNIX password: passwd: all authentication tokens updated successfully. [root@dnocc7201:~]# chown glassfish:glassfish /nhin

  6. Downloads: CONNECT Files 6 • Step 6.2.4: Download the CONNECT Linux packages from the CONNECT website and place in /nhin folder: • http://www.connectopensource.org/display/NHINR22/Linux+Release • There are 5 packages: • NHIN CONNECT Gateway Binary Package • NHIN CONNECT Glassfish Binary Package • NHIN CONNECT Interfaces Package • NHIN CONNECT Properties Package • NHIN CONNECT Third Party Package

  7. Download/Install: Java Packages 7 • Step 6.3.1: The Java 1.6.0_13 packages can be obtained from Red Hat Network. Please download the following files from rhn.redhat.com and place in /nhin: • java-1.6.0-sun-1.6.0.13-1jpp.1.el5.i586.rpm • java-1.6.0-sun-devel-1.6.0.13-1jpp.1.el5.i586.rpm • Step 6.3.2: Install Java Packages

  8. Download/Install: Java Packages [root@dnocc7201:~]# yum localinstall /nhin/java-1.6.0*.rpm Loaded plugins: rhnplugin, security Setting up Local Package Process Examining /nhin/java-1.6.0-sun-1.6.0.13-1jpp.1.el5.i586.rpm: 1:java-1.6.0-sun-1.6.0.13-1jpp.1.el5.i586 Marking /nhin/java-1.6.0-sun-1.6.0.13-1jpp.1.el5.i586.rpm to be installed Examining /nhin/java-1.6.0-sun-devel-1.6.0.13-1jpp.1.el5.i586.rpm: 1:java-1.6.0-sun-devel-1.6.0.13-1jpp.1.el5.i586 Marking /nhin/java-1.6.0-sun-devel-1.6.0.13-1jpp.1.el5.i586.rpm to be installed Resolving Dependencies --> Running transaction check ---> Package java-1.6.0-sun.i586 1:1.6.0.13-1jpp.1.el5 set to be updated --> Processing Dependency: jpackage-utils >= 1.5.38 for package: java-1.6.0-sun ---> Package java-1.6.0-sun-devel.i586 1:1.6.0.13-1jpp.1.el5 set to be updated --> Running transaction check ---> Package jpackage-utils.noarch 0:1.7.3-1jpp.2.el5 set to be updated --> Finished Dependency Resolution Dependencies Resolved ================================================================================================================== Package Arch Version Repository Size ================================================================================================================== Installing: java-1.6.0-sun i586 1:1.6.0.13-1jpp.1.el5 /java-1.6.0-sun-1.6.0.13-1jpp.1.el5.i586 102 M java-1.6.0-sun-devel i586 1:1.6.0.13-1jpp.1.el5 /java-1.6.0-sun-devel-1.6.0.13-1jpp.1.el5.i586 52 M Installing for dependencies: jpackage-utils noarch 1.7.3-1jpp.2.el5 rhel-i386-server-5 61 k Transaction Summary ================================================================================================================== Install 3 Package(s) Update 0 Package(s) Remove 0 Package(s)

  9. Download/Install: Java Packages Total size: 154 M Total download size: 61 k Is this ok [y/N]: y Downloading Packages: jpackage-utils-1.7.3-1jpp.2.el5.noarch.rpm | 61 kB 00:01 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : jpackage-utils 1/3 Installing : java-1.6.0-sun 2/3 Installing : java-1.6.0-sun-devel 3/3 Installed: java-1.6.0-sun.i586 1:1.6.0.13-1jpp.1.el5 java-1.6.0-sun-devel.i586 1:1.6.0.13-1jpp.1.el5 Dependency Installed: jpackage-utils.noarch 0:1.7.3-1jpp.2.el5 Complete!

  10. Installation of GlassFishESB • Step 6.4.1: Log in as Glassfish User • Step 6.4.2: Unpack the Thirdpartytools Package • Step 6.4.3: Install the Environmental Variable File • Step 6.4.4: Install GlassFish ESB • Step 6.4.5: Install GlassFish Service 10

  11. Installation of GlassFishESB [jsanch07@sustd3540:~/nhin/linuxinstall]$ ssh glassfish@dnocc7201 glassfish@dnocc7201's password: Last login: Wed Nov 3 16:37:28 2009 from sustd3540.gs.myharris.net [glassfish@dnocc7201:~]$ tar xzf connect-thirdpartytools-2.2.tar.gz [glassfish@dnocc7201:~]$ su - Password: [root@dnocc7201:~]# cp /nhin/connect-thirdpartytools/nhin-profile.sh /etc/profile.d/ [root@dnocc7201:~]# chmod 755 /etc/profile.d/nhin-profile.sh [jsanch07@sustd3540:~/nhin/linuxinstall]$ ssh glassfish@dnocc7201 glassfish@dnocc7201's password: [glassfish@dnocc7201:~]$ connect-thirdpartytools/glassfishesb-v2.1-full-installer-linux.sh --silent --state \ > connect-thirdpartytools/glassfish-state.xml [glassfish@dnocc7201:~]$ su - Password: [root@dnocc7201:~]# cp /nhin/connect-thirdpartytools/glassfish-init /etc/init.d/glassfish [root@dnocc7201:~]# chkconfig --add glassfish [root@dnocc7201:~]# chkconfig --level 345 glassfish on

  12. Installation of Third Party Runtime Libraries 12 Step 6.5.1: Install Metro

  13. Install Metro [glassfish@dnocc7201:~]$ java -jar connect-thirdpartytools/metro-1_4.jar -console COMMON DEVELOPMENT AND DISTRIBUTION LICENSE (CDDL) Version 1.0 1. Definitions. 1.1. Contributor. means each individual or entity that creates or contributes to the creation of Modifications. 1.2. Contributor Version. means the combination of the Original Software, prior Modifications used by a Contributor (if any), and the Modifications made by that particular Contributor. 1.3. Covered Software. means (a) the Original Software, or (b) Modifications, or (c) the combination of files containing Original Software with files containing Modifications, in each case including portions thereof. 1.4. Executable. means the Covered Software in any form other than Source Code. 1.5. Initial Developer. means the individual or entity that first makes Original Software available under this License. . . . Truncated the output for this webinar. The output includes: - COMMON DEVELOPMENT AND DISTRIBUTION LICENSE - NOTICE PURSUANT TO SECTION 9 OF THE COMMON DEVELOPMENT AND DISTRIBUTION LICENSE (CDDL) - TERMS AND CONDITIONS FOR COPYING - DISTRIBUTION AND MODIFICATION - How to Apply These Terms to your New Programs, - "CLASSPATH" EXCEPTION TO THE GPL VERSION 2 TO THE GPL VERSION 2

  14. Install Metro Accept or Decline? [A,D,a,d] a metro metro/bin metro/docs metro/docs/style metro/for_v3 metro/lib metro/samples metro/samples/annotations metro/samples/annotations/etc metro/samples/annotations/src metro/samples/annotations/src/annotations metro/samples/annotations/src/annotations/client metro/samples/annotations/src/annotations/server metro/samples/async metro/samples/async/etc metro/samples/async/src metro/samples/async/src/async metro/samples/async/src/async/client metro/samples/async/src/async/server metro/samples/asyncprovider metro/samples/asyncprovider/etc metro/samples/asyncprovider/src metro/samples/asyncprovider/src/asyncprovider metro/samples/asyncprovider/src/asyncprovider/client . . . Shortened for space purposes. The actual output is a list of items installed in /metro TO THE GPL VERSION 2  Accept by entering “a” or “A”

  15. Install Metro . . . metro/samples/xmlbind_datasource/src/xmlbind_datasource/client/DispatchImage.java metro/samples/xmlbind_datasource/src/xmlbind_datasource/server/ImageImpl.java installation complete [glassfish@dnocc7201:~]$ cd metro [glassfish@dnocc7201:~/metro]$ ant -f metro-on-glassfish.xml install Buildfile: metro-on-glassfish.xml gfv3-checkpoint: init: [mkdir] Created dir: /nhin/GlassFishESB/glassfish/.wsit-1.4 [copy] Copying 3 files to /nhin/GlassFishESB/glassfish/.wsit-1.4 install: [echo] Installing Metro 1.4 FCS on /nhin/GlassFishESB/glassfish ... [copy] Copying 2 files to /nhin/GlassFishESB/glassfish/lib [copy] Copying 1 file to /nhin/GlassFishESB/glassfish/lib/endorsed gfv3-checkpoint: install-api: [copy] Copying 1 file to /usr/lib/jvm/java-1.6.0-sun-1.6.0.13/jre/lib/endorsed BUILD FAILED /nhin/metro/metro-on-glassfish.xml:132: The following error occurred while executing this line: /nhin/metro/metro-on-glassfish.xml:139: Failed to copy /nhin/metro/lib/webservices-api.jar to /usr/lib/jvm/java-1.6.0-sun-1.6.0.13/jre/lib/endorsed/webservices-api.jar due to java.io.FileNotFoundException /usr/lib/jvm/java-1.6.0-sun-1.6.0.13/jre/lib/endorsed/webservices-api.jar (Permission denied) and I couldn't delete the corrupt /usr/lib/jvm/java-1.6.0-sun-1.6.0.13/jre/lib/endorsed/webservices-api.jar TO THE GPL VERSION 2

  16. Install Metro Total time: 1 second [glassfish@dnocc7201:~/metro]$ su - Password: [root@dnocc7201:~]# cd /nhin/metro [root@dnocc7201:/nhin/metro]# ant -f metro-on-glassfish.xml install-api Buildfile: metro-on-glassfish.xml gfv3-checkpoint: install-api: [copy] Copying 1 file to /usr/lib/jvm/java-1.6.0-sun-1.6.0.13/jre/lib/endorsed BUILD SUCCESSFUL Total time: 0 seconds

  17. Installation of Third Party Runtime Libraries 17 Step 6.5.2: Install Third Party Libraries to Glassfish

  18. Installation of Third Party Libraries to Glassfish [root@dnocc7201:/nhin/metro]# exit logout [glassfish@dnocc7201:~/metro]$ cd /nhin [glassfish@dnocc7201:~]$ tar xzf connect-glassfish-libs-bin-2.2.tar.gz [glassfish@dnocc7201:~]$ cp connect-glassfish-libs/* $AS_HOME/lib

  19. Creation and Installation of Certificates 19 Step 6.6.1: Create SSL Certificates Note: Please replace the "YOUREMAIL, GATEWAY.EXAMPLE.COM, YOURDEPARTMENT, COMPANYNAME, CITY, and STATE with values appropriate to your CONNECT installation. Step 6.6.2: Generate Certificate Signing Request Step 6.6.3: Send Certificate Signing Request to NHIN CA Step 6.6.4: Download Signature and CA Certificate from NHIN CA

  20. Create SSL Certificates [jsanch07@sustd3540:~/nhin/linuxinstall]$ ssh glassfish@dnocc7201 glassfish@dnocc7201's password: Last login: Tue Nov 3 16:52:07 2009 from sustd3540.gs.myharris.net [glassfish@dnocc7201:~]$ mkdir certs [glassfish@dnocc7201:~]$ cd certs [glassfish@dnocc7201:~/certs]$ keytool -genkeypair -keyalg RSA -keysize 2048 -keystore gateway.jks \ > -validity 365 -alias gateway -dname \ "EmailAddress=jsanch07@harris.com, cn=linuxinstall.gcsd.harris.com, ou=exchangeservices, o=Harris Corp, l=Melbourne, s=Florida, c=US" Enter keystore password: Re-enter new password: Enter key password for <gateway> (RETURN if same as keystore password): uest.csr Enter keystore password: [glassfish@dnocc7201:~]$ keytool -certreq -alias gateway -sigalg SHA1withRSA -keystore gateway.jks -file request.csr Enter keystore password:

  21. Creation and Installation of Certificates 21 Step 6.6.5: Install CA Certificate and Signature to Keystore Step 6.6.6: Copy Keystore to Glassfish Domain Config Step 6.6.7: Install CA Certificate to Trust Store

  22. Creation and Installation of Certificates [glassfish@dnocc7201 :~/certs]$ keytool -import -trustcacerts -alias justin_ca -file justin_ca.arm -keystore gateway.jks Enter keystore password: Owner: EMAILADDRESS=justin.sanchez@harris.com, CN=Justin Sanchez, OU=Exchange Services, O=Harris Corporation, ST=Florida, C=US Issuer: EMAILADDRESS=justin.sanchez@harris.com, CN=Justin Sanchez, OU=Exchange Services, O=Harris Corporation, ST=Florida, C=US Serial number: db52e7f1260cffdc Valid from: Tue Oct 06 16:16:37 EDT 2009 until: Fri Oct 05 16:16:37 EDT 2012 Certificate fingerprints: MD5: 45:DE:0C:56:59:BE:BF:F9:DD:C3:5A:BC:74:CC:B2:AB SHA1: 17:F4:0C:62:72:52:71:97:3B:DF:56:A5:89:B4:88:94:AA:AD:6B:EB Signature algorithm name: SHA1withRSA Version: 3 Extensions: #1: ObjectId: 2.5.29.14 Criticality=false SubjectKeyIdentifier [ KeyIdentifier [ 0000: 27 63 BD 29 BE F1 88 7C 35 0F 8E 19 4D DB 2C DF 'c.)....5...M.,. 0010: C6 29 3A 44 .):D ] ] #2: ObjectId: 2.5.29.19 Criticality=false BasicConstraints:[ CA:true PathLen:2147483647 ] #3: ObjectId: 2.5.29.35 Criticality=false AuthorityKeyIdentifier [ KeyIdentifier [ 0000: 27 63 BD 29 BE F1 88 7C 35 0F 8E 19 4D DB 2C DF 'c.)....5...M.,. 0010: C6 29 3A 44 .):D ]

  23. Creation and Installation of Certificates [EMAILADDRESS=justin.sanchez@harris.com, CN=Justin Sanchez, OU=Exchange Services, O=Harris Corporation, ST=Florida, C=US] SerialNumber: [ db52e7f1 260cffdc] ] Trust this certificate? [no]: yes Certificate was added to keystore [glassfish@dnocc7201:~/certs]$ keytool -import -alias gateway -file response.arm -keystore gateway.jks Enter keystore password: Certificate reply was installed in keystore [glassfish@dnocc7201:~/certs]$ cp gateway.jks /nhin/GlassFishESB/glassfish/domains/domain1/config/keystore.jks store \ish@dnocc7201:~/certs]$ keytool -import -trustcacerts -alias justin_ca -file /nhin/certs/justin_ca.arm -key > $AS_HOME/domains/domain1/config/cacerts.jks Enter keystore password: Owner: EMAILADDRESS=justin.sanchez@harris.com, CN=Justin Sanchez, OU=Exchange Services, O=Harris Corporation, ST=Florida, C=US Issuer: EMAILADDRESS=justin.sanchez@harris.com, CN=Justin Sanchez, OU=Exchange Services, O=Harris Corporation, ST=Florida, C=US Serial number: db52e7f1260cffdc Valid from: Tue Oct 06 16:16:37 EDT 2009 until: Fri Oct 05 16:16:37 EDT 2012 Certificate fingerprints: MD5: 45:DE:0C:56:59:BE:BF:F9:DD:C3:5A:BC:74:CC:B2:AB SHA1: 17:F4:0C:62:72:52:71:97:3B:DF:56:A5:89:B4:88:94:AA:AD:6B:EB Signature algorithm name: SHA1withRSA Version: 3 Extensions: #1: ObjectId: 2.5.29.14 Criticality=false SubjectKeyIdentifier [ KeyIdentifier [ 0000: 27 63 BD 29 BE F1 88 7C 35 0F 8E 19 4D DB 2C DF 'c.)....5...M.,. 0010: C6 29 3A 44 .):D ] ] <- Answer “yes”

  24. Creation and Installation of Certificates #2: ObjectId: 2.5.29.19 Criticality=false BasicConstraints:[ CA:true PathLen:2147483647 ] #3: ObjectId: 2.5.29.35 Criticality=false AuthorityKeyIdentifier [ KeyIdentifier [ 0000: 27 63 BD 29 BE F1 88 7C 35 0F 8E 19 4D DB 2C DF 'c.)....5...M.,. 0010: C6 29 3A 44 .):D ] [EMAILADDRESS=justin.sanchez@harris.com, CN=Justin Sanchez, OU=Exchange Services, O=Harris Corporation, ST=Florida, C=US] SerialNumber: [ db52e7f1 260cffdc] ] Trust this certificate? [no]: yes Certificate was added to keystore

  25. Configure Glassfish 25 The commands 6.7.1 – 6.7.3 show how to update the domain.xml file located in /nhin/GlassFishESB/glassfish/domains/domain1/config/domain.xml

  26. Configure Glassfish 26

  27. Configure CONNECT Gateway • Step 6.8.1: Unpack CONNECT Properties • Step 6.8.2: Update CONNECT Properties * If you are creating a production installation, you will need to obtain an OID. Instructions for this are in Appendix A. • Step 6.8.3: Work around for File Path 27

  28. Creation and Installation of Certificates [jsanch07@sustd3540:~/nhin/linuxinstall]$ ssh glassfish@dnocc7201 glassfish@dnocc7201's password: Last login: Tue Nov 3 17:44:25 2009 from sustd3540.gs.myharris.net [glassfish@dnocc7201:~]$ cd /nhin/GlassFishESB/glassfish/domains/domain1/config/ [glassfish@dnocc7201:~/GlassFishESB/glassfish/domains/domain1/config]$ tar xzf /nhin/connect-properties-2.2.tar.gz [glassfish@dnocc7201:~/GlassFishESB/glassfish/domains/domain1/config]$ cd nhin/ [glassfish@dnocc7201:~/GlassFishESB/glassfish/domains/domain1/config/nhin]$ vim gateway.properties [glassfish@dnocc7201:~/GlassFishESB/glassfish/domains/domain1/config/nhin]$ vim internalConnectionInfo.xml [glassfish@dnocc7201:~/GlassFishESB/glassfish/domains/domain1/config/nhin]$ ln -s /nhin/GlassFishESB /nhin/GlassFishESB/glassfish/domains/domain1/config/nhin/ [glassfish@dnocc7201:~/GlassFishESB/glassfish/domains/domain1/config/nhin]$ cd /nhin/ [glassfish@dnocc7201:~]$ exit logout Connection to dnocc7201 closed.

  29. Install MySQL Database 29 Step 6.9.1: Install MySQL Database * The following instruction is specific to Red Hat Enterprise Linux 5. If you are using a different distribution of Linux, please consult your vendor's documentation for how to install MySQL database on your Linux system. Make sure both the client application and database server are installed (sometimes this requires a separate -server package). Make sure you also configure mySQL to start at boot, as a service, and start the mySQL server.

  30. Install MySQL Database [jsanch07@sustd3540:~/nhin/linuxinstall]$ ssh glassfish@dnocc7201 glassfish@dnocc7201's password: Last login: Tue Nov 3 17:59:36 2009 from sustd3540.gs.myharris.net [glassfish@dnocc7201:~]$ su - Password: [root@dnocc7201:~]# yum install mysql mysql-server Loaded plugins: rhnplugin, security Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package mysql.i386 0:5.0.77-3.el5 set to be updated --> Processing Dependency: perl(DBI) for package: mysql ---> Package mysql-server.i386 0:5.0.77-3.el5 set to be updated --> Processing Dependency: perl-DBD-MySQL for package: mysql-server --> Running transaction check ---> Package perl-DBD-MySQL.i386 0:3.0007-2.el5 set to be updated ---> Package perl-DBI.i386 0:1.52-2.el5 set to be updated Finished Dependency Resolution Dependencies Resolved ================================================================================================================== Package Arch Version Repository Size ================================================================================================================== Installing: mysql i386 5.0.77-3.el5 rhel-i386-server-5 4.8 M mysql-server i386 5.0.77-3.el5 rhel-i386-server-5 9.8 M Installing for dependencies: perl-DBD-MySQL i386 3.0007-2.el5 rhel-i386-server-5 147 k perl-DBI i386 1.52-2.el5 rhel-i386-server-5 605 k

  31. Install MySQL Database Transaction Summary ================================================================================================================== Install 4 Package(s) Update 0 Package(s) Remove 0 Package(s) Total download size: 15 M Is this ok [y/N]: y Downloading Packages: (1/4): perl-DBD-MySQL-3.0007-2.el5.i386.rpm | 147 kB 00:01 (2/4): perl-DBI-1.52-2.el5.i386.rpm | 605 kB 00:00 (3/4): mysql-5.0.77-3.el5.i386.rpm | 4.8 MB 00:02 (4/4): mysql-server-5.0.77-3.el5.i386.rpm | 9.8 MB 00:05 ------------------------------------------------------------------------------------------------------------------ Total 512 kB/s | 15 MB 00:30 Running rpm_check_debug Running Transaction Test Finished Transaction Test Transaction Test Succeeded Running Transaction Installing : perl-DBI 1/4 Installing : mysql 2/4 Installing : perl-DBD-MySQL 3/4 Installing : mysql-server 4/4 Installed: mysql.i386 0:5.0.77-3.el5 mysql-server.i386 0:5.0.77-3.el5 Dependency Installed: perl-DBD-MySQL.i386 0:3.0007-2.el5 perl-DBI.i386 0:1.52-2.el5 Complete!

  32. Install MySQL Database [root@dnocc7201:~]# chkconfig --level 345 mysqld on [root@dnocc7201:~]# service mysqld start Initializing MySQL database: Installing MySQL system tables... 091103 18:32:24 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295 091103 18:32:24 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295 OK Filling help tables... 091103 18:32:24 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295 091103 18:32:24 [Warning] option 'max_join_size': unsigned value 18446744073709551615 adjusted to 4294967295 OK To start mysqld at boot time you have to copy support-files/mysql.server to the right place for your system PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER ! To do so, start the server, then issue the following commands: /usr/bin/mysqladmin -u root password 'new-password' /usr/bin/mysqladmin -u root -h dnocc7201.mtse.dev password 'new-password' Alternatively you can run: /usr/bin/mysql_secure_installation which will also give you the option of removing the test databases and anonymous user created by default. This is strongly recommended for production servers. See the manual for more instructions.

  33. Install MySQL Database You can start the MySQL daemon with: cd /usr ; /usr/bin/mysqld_safe & You can test the MySQL daemon with mysql-test-run.pl cd mysql-test ; perl mysql-test-run.pl Please report any problems with the /usr/bin/mysqlbug script! The latest information about MySQL is available on the web at http://www.mysql.com Support MySQL by buying support/licenses at http://shop.mysql.com [ OK ] Starting MySQL: [ OK ] [root@dnocc7201:~]# exit

  34. Install MySQL Database 34 Step 6.9.2: Configure mySQL Users

  35. Configure mySQL Users [glassfish@dnocc7201:~]$ mysqladmin -uroot password 'NHIE-Gateway' [glassfish@dnocc7201:~]$ mysql -uroot -pNHIE-Gateway Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.0.77 Source distribution Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> DELETE FROM mysql.user WHERE user=""; Query OK, 2 rows affected (0.00 sec) mysql> exit Bye [glassfish@dnocc7201:~]$ mysql -uroot -pNHIE-Gateway < connect-thirdpartytools/nhincdb.sql [glassfish@dnocc7201:~]$ exit logout Connection to dnocc7201 closed.

  36. Deploy CONNECT Gateway 36 Step 6.10.1: Unpack CONNECT WSDLs Step 6.10.2: Unpack CONNECT Gateway Software Step 6.10.3: Install CONNECT Libraries to Glassfish Step 6.10.4: Start Glassfish Application Server Step 6.10.5: Deploy CONNECT Applications

  37. Configure mySQL Users [jsanch07@sustd3540:~/nhin/linuxinstall]$ ssh glassfish@dnocc7201 glassfish@dnocc7201's password: Last login: Wed Nov 4 10:53:07 2009 from sustd3540.gs.myharris.net [glassfish@dnocc7201:~]$ tar xzf connect-interfaces-2.2.tar.gz [glassfish@dnocc7201:~]$ tar xzf connect-gateway-bin-2.2.tar.gz [glassfish@dnocc7201:~]$ cp connect-gateway/*Lib.jar $AS_HOME/lib [glassfish@dnocc7201:~]$ asadmin start-domain domain1 Starting Domain domain1, please wait. Default Log location is /nhin/GlassFishESB/glassfish/domains/domain1/logs/server.log. Redirecting output to /nhin/GlassFishESB/glassfish/domains/domain1/logs/server.log Domain domain1 is ready to receive client requests. Additional services are being started in background. Domain [domain1] is running [Sun GlassFish Enterprise Server v2.1 (9.1.1) (build b60e-fcs)] with its configuration and logs at: [/nhin/GlassFishESB/glassfish/domains]. Admin Console is available at [http://localhost:4848]. Use the same port [4848] for "asadmin" commands. User web applications are available at these URLs: [http://localhost:8080 https://localhost:8181 ]. Following web-contexts are available: [/web1 /__wstx-services ]. Standard JMX Clients (like JConsole) can connect to JMXServiceURL: [service:jmx:rmi:///jndi/rmi://dnocc7201.mtse.dev:8686/jmxrmi] for domain management purposes. Domain listens on at least following ports for connections: [8080 8181 4848 3100 3820 3920 8686 ]. Domain does not support application server clusters and other standalone instances.

  38. Configure mySQL Users [glassfish@dnocc7201:~]$ connect-gateway/modules.sh deploy Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. Command deploy executed successfully. [glassfish@dnocc7201:~]$ exit logout Connection to dnocc7201 closed. [jsanch07@sustd3540:~/nhin/linuxinstall]$ exit

  39. Testing Using SOAPUI 39 • Get the Internal Self-Test Package for UNIX and Internal Self-Test Setup Instructions from: http://www.connectopensource.org/display/NHINR22/SoapUI+Tests • Copy the Self-Test Package into /nhin • Unzip Self-Test Package and SOAPUI • Copy files from SelfTest/InternalSelfTest/: • mysql-connector-java-5.0.8-bin.jar into soapui-2.5.1/bin/ext/ • mpi.xml into GlassFishESB/glassfish/domains/domain1/config/ • reidentification.xml into GlassFishESB/glassfish/domains/domain1/config/nhin/

  40. Testing Using SOAPUI • Setup NHINC user in mySQL database • Load test document data into mySQL • Setup symbolic link to support test package paths • Edit InternalSelfTest.properties • Run Internal Self Tests 40

  41. Testing Using SOAPUI [jsanch07@sustd3540:~/nhin/linuxinstall]$ ssh glassfish@dnocc7201 glassfish@dnocc7201's password: Last login: Wed Nov 4 14:49:43 2009 from sustd3540.gs.myharris.net [glassfish@dnocc7201:~]$ unzip NHIN_CONNECT_Release_2_2_A020_Demonstration_Scripts_Internal_Self_Test_UNIX_092709.zip Archive: NHIN_CONNECT_Release_2_2_A020_Demonstration_Scripts_Internal_Self_Test_UNIX_092709.zip SelfTest\InternalSelfTest\document.sql: mismatching "local" filename (SelfTest/InternalSelfTest/document.sql), continuing with "central" filename version warning: NHIN_CONNECT_Release_2_2_A020_Demonstration_Scripts_Internal_Self_Test_UNIX_092709.zip appears to use backslashes as path separators inflating: SelfTest/InternalSelfTest/document.sql SelfTest\InternalSelfTest\mpi.xml: mismatching "local" filename (SelfTest/InternalSelfTest/mpi.xml), continuing with "central" filename version inflating: SelfTest/InternalSelfTest/mpi.xml SelfTest\InternalSelfTest\mysql-connector-java-5.0.8-bin.jar: mismatching "local" filename (SelfTest/InternalSelfTest/mysql-connector-java-5.0.8-bin.jar), continuing with "central" filename version inflating: SelfTest/InternalSelfTest/mysql-connector-java-5.0.8-bin.jar SelfTest\InternalSelfTest\reidentification.xml: mismatching "local" filename (SelfTest/InternalSelfTest/reidentification.xml), continuing with "central" filename version inflating: SelfTest/InternalSelfTest/reidentification.xml SelfTest\InternalSelfTest\InternalSelfTest.properties: mismatching "local" filename (SelfTest/InternalSelfTest/InternalSelfTest.properties), continuing with "central" filename version inflating: SelfTest/InternalSelfTest/InternalSelfTest.properties SelfTest\InternalSelfTest\InternalSelfTest-soapui-project.xml: mismatching "local" filename (SelfTest/InternalSelfTest/InternalSelfTest-soapui-project.xml), continuing with "central" filename version inflating: SelfTest/InternalSelfTest/InternalSelfTest-soapui-project.xml [glassfish@dnocc7201:~]$ unzip connect-thirdpartytools/soapui-2.5.1-bin.zip Archive: soapui-2.5.1-bin.zip creating: soapui-2.5.1/ creating: soapui-2.5.1/bin/ . . .

  42. Testing Using SOAPUI . . . inflating: soapui-2.5.1/Tutorials/WSDL-WADL/NewsSearchResponse.xsd inflating: soapui-2.5.1/Tutorials/WSDL-WADL/sample-service.wsdl inflating: soapui-2.5.1/Tutorials/WSDL-WADL/YahooSearch.wadl [glassfish@dnocc7201:~]$ cp SelfTest/InternalSelfTest/mysql-connector-java-5.0.8-bin.jar soapui-2.5.1/bin/ext/ [glassfish@dnocc7201:~]$ cp SelfTest/InternalSelfTest/mpi.xml GlassFishESB/glassfish/domains/domain1/config/ [glassfish@dnocc7201:~]$ cp SelfTest/InternalSelfTest/reidentification.xml GlassFishESB/glassfish/domains/domain1/config/nhin/ [glassfish@dnocc7201:~]$ mysql -uroot -pNHIE-Gateway Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 263 Server version: 5.0.77 Source distribution Type 'help;' or '\h' for help. Type '\c' to clear the buffer. mysql> GRANT ALL PRIVILEGES ON *.* TO 'nhincuser'@'localhost' IDENTIFIED BY 'nhincpass' WITH GRANT OPTION; Query OK, 0 rows affected (0.00 sec) mysql> GRANT ALL PRIVILEGES ON *.* TO 'nhincuser'@'dnocc7201' IDENTIFIED BY 'nhincpass' WITH GRANT OPTION; Query OK, 0 rows affected (0.00 sec) mysql> FLUSH PRIVILEGES; Query OK, 0 rows affected (0.00 sec) mysql> exit Bye

  43. Testing Using SOAPUI [glassfish@dnocc7201:~]$ mysql -uroot -pNHIE-Gateway docrepository < SelfTest/InternalSelfTest/document.sql [glassfish@dnocc7201:~]$ ln -s /nhin \$HOME [glassfish@dnocc7201:~]$ perl -p -i -e 's/<Gateway-IP>/dnocc7201/; s/=1\.1\r?$/=DNOCC7201/' SelfTest/InternalSelfTest/InternalSelfTest.properties [glassfish@dnocc7201:~]$ sh soapui-2.5.1/bin/testrunner.sh -r SelfTest/InternalSelfTest/InternalSelfTest-soapui-project.xml ================================ = = SOAPUI_HOME = /nhin/soapui-2.5.1 = ================================ soapUI 2.5.1 TestCase Runner 15:28:12,824 INFO [SoapUI] Added [file:/nhin/soapui-2.5.1/bin/ext/mysql-connector-java-5.0.8-bin.jar] to classpath 15:28:13,758 INFO [DefaultSoapUICore] initialized soapui-settings from [/nhin/soapui-2.5.1/soapui-settings.xml] 15:28:15,793 INFO [WsdlProject] Loaded project from [file:/nhin/SelfTest/InternalSelfTest/InternalSelfTest-soapui-project.xml] 15:28:18,116 INFO [SoapUITestCaseRunner] Running soapUI tests in project [InternalSelfTest] . . . 15:29:49,170 INFO [SoapUITestCaseRunner] Finished running soapUI testcase [Revoke], time taken: 12605ms, status: FINISHED 15:29:49,171 INFO [SoapUITestCaseRunner] soapUI suite [InternalSelfTest TestSuite] finished in 90952ms SoapUI 2.5.1 TestCaseRunner Summary ----------------------------- Time Taken: 91053ms Total TestSuites: 1 Total TestCases: 9 (0 failed) Total TestSteps: 59 Total Request Assertions: 30 Total Failed Assertions: 0 Total Exported Results: 0 [glassfish@dnocc7201:~]$ exit logout Connection to dnocc7201 closed.

  44. Questions? Thank you for joining.