1 / 34

Petroleum Engineering 406

Petroleum Engineering 406. Introduction. Introduction. Introduction to course Class hours Grading Textbooks Schedule Introduction to Well Control. Introduction. Description: (3-0). Credit 3. II

deanne
Download Presentation

Petroleum Engineering 406

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Petroleum Engineering 406 Introduction

  2. Introduction • Introduction to course • Class hours • Grading • Textbooks • Schedule • Introduction to Well Control

  3. Introduction • Description: (3-0). Credit 3. II • Well control; underbalanced drilling; offshore drilling; horizontal, extended, reach, multi-lateral drilling; and fishing operations • Prerequisite: PETE 411 • Classes: 8:00 – 8:50 a.m. MWF • Richardson: 313

  4. Introduction • Instructor: Jerome J. Schubert, PE • Office: 501K Richardson • Hours: 9:00 - 11:00 a.m. TR • Phone: 979/862-1195 • e-mail: schubert@spindletop.tamu.edu • Notes: http://pumpjack.tamu.edu/~schubert

  5. Grading • QuizA: 20% • Quiz B: 20% • Final: 20% • Hmwk: 20% • Project: 20%

  6. Textbooks • Applied Drilling Engineering • Bourgoyne, Chenevert, Millheim, Young • Well Control Manual • Schubert • Handouts, Technical papers, etc.

  7. Course Content • Well Control • Kicks • Blowouts • Terminology • Basic Well Control Calculations • Causes of Kicks • Kick Detection • Shut-In Procedures

  8. Course Content • Well Kill Procedures • Equivalent Mud Weights • Casing Seat Tests • Kick Tolerances • Gas Kicks • Abnormal Pressure • Casing Seat Selection

  9. Course Content • Well Control Equipment • Unusual Well Control Operations • Shallow Gas • Subsea Well Control

  10. Course Content • Underbalanced Drilling, UBD • Introduciton to UBD • UBD techniques • Benefits • Equipment • Selecting candidates • UBD engineering

  11. Course Content • Offshore Drilling • Platform Rigs • Jackup rigs • Floating Drilling

  12. Course Content • Dual Gradient Drilling • Introduction to DGD • U-tube concepts • Pressure profiles • DGD well control

  13. Petroleum Engineering 406 Lesson 1 Well Control

  14. Well Control • Kick • “an unscheduled entry of formation fluids into the wellbore, of sufficient Quantity to require shutting in the well. • Blowout • Loss of control of a kick

  15. Blowout

  16. Blowouts

  17. Well Control • Blowout • Surface • Underground • Blowouts caused by • equipment failure • human error

  18. Well Control • Engineers in office can aid in well control by: • Provide pressure profiles for all pending wells • Provide offset information such as logs, bit records, mud reports, drilling records. • Provide support and assistance personnel on location.

  19. Well Control Terminology • Hydrostatic pressure = .052 x MW x TVD

  20. Hydrostatic Pressure • Derive HSP equation • Calculate the HSP for each of the following: • 10,000’ of 12.0 ppg mud • 12,000’ of 10.5 ppg mud • 5,000’ of 11.2 ppg mud on top of 6,000’ of 16.5 ppg mud

  21. Hydrostatic Pressure A • Derive HSP equation • Area = A, sq.ft. • Height = h, ft. • Density = MW, ppg • Weight of fluid = • A*h (ft3)*62.4 lb/ ft3 *MW/8.33 • =62.4/8.33*MW*A*h h MW

  22. Hydrostatic Pressure • This weight is equally distributed over an area of A sq.ft or 144*A sq. in. • Pressure = Weight (force)/area • = 62.4*MW*A*h • 8.33*144*A • P=.052*MW*h where h=TVD

  23. Terminology • Pressure Gradient • psi/ft = .052 x MW • ppg equivalent • Formation Pressure • Normal pressure • Abnormal pressure • Subnormal pressure

  24. Terminology • Overburden pressure • function of rock and fluid above zone of interest • Fracture pressure

  25. Terminology • Pump pressure or system pressure loss

  26. Terminology • Slow Pump Pressure • Taken: • every tour by each driller • pumps repaired or liners changed • mud properties change • every 500’ of hole • change in BHA • bit nozzles changed

  27. Terminology • Surge pressure • Swab pressure

  28. Terminology • Shut-in drillpipe pressure - SIDPP • FP = HSPdp + SIDPP • Shut-in casing pressure - SICP • FP = HSPcsg mud + HSPinflux + SICP • Bottom-hole pressure - BHP • BHP = HSP + SIP + Friction + Surge - Swab

  29. U-Tube Concept

  30. Basic Calculations • Dia, in - cap, bbl/ft

  31. Basic Calculations • Pump Output • Duplex Pump • Triplex Pump

  32. Basic Calculations

  33. Basic Calculations • Kill Weight Mud • KWM = SIDPP/(0.052 x TVD) + OWM • KWM = FP/(0.052 x TVD)

  34. Weight material to add to increase density

More Related