1 / 9

Static Friction

Static Friction. Holding in Place. Objects on an incline will often stay put. There must be a force that holds the object in place. Static friction is from the contact of resting objects. Force holds up to a certain point Force is based on the type of contact (rough, smooth)

Download Presentation

Static Friction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Static Friction

  2. Holding in Place • Objects on an incline will often stay put. • There must be a force that holds the object in place. • Static friction is from the contact of resting objects. • Force holds up to a certain point • Force is based on the type of contact (rough, smooth) • Maximum force is proportional to the pressing force of the object (normal force)

  3. Inequality • The approximate formula for static friction is: ms is the coefficient of static friction • This is an inequality. • The force of static friction is generally less than the coefficient times the normal force

  4. m q Starting Motion • If Ffr < msFN = msmg cosq, then the block will hold. • At equality the block just begins to move.

  5. Use a pulley and vary the weight to see when movement begins. Forces balance on mass 1 Tension is equal on the rope Forces balance on mass 2 m1 m2 Measuring Friction: Pulley FT Frope FT Frope

  6. The pulley determines the coefficient of friction through the ratio of masses. m1 m2 Coefficient of Friction: Pulley

  7. Use an incline and vary the angle to see when movement begins. One component of gravity balances the normal force The other component of gravity balances friction m q Measuring Friction: Incline

  8. The incline determines the coefficient of friction through the tangent of the angle. m q Coefficient of Friction: Incline

  9. Normal Force and Friction • Static friction depends on both the normal force and on the coefficient of friction. • To reduce friction requires reducing one of those factors. • Reduce normal force by lightening the load • Reduce normal force by adding additional upward force • Add a lubricant to reduce the coefficient of friction next

More Related