1 / 5

Computer Display Problems: How to Troubleshoot It?

Burnaby Computer Repair is probably the best company to service your computer software and hardware in Burnaby. Friendly and knowledgeable computer technicians are ready for any computer problem, any challenge, big or small. We are often available after hours and on a short notice. We value all our clients who supported us for well over a decade.

Download Presentation

Computer Display Problems: How to Troubleshoot It?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Computer Display Problems: How to Troubleshoot It?

  2. Most often, our computers are usually reliable, but there is always a possibility available when something can go wrong. If for instance, you have turned on your computer and nothing is displaying on the monitor. This is one of the most common computer problems that we face in our daily day life. During display problems, your data is most likely safe and this type of computer repair is something that you can either fix by yourself or going to need help from professionals who offer computer troubleshooting services. The Most Common Reasons of Display Problems Power Supply Your monitor is obviously not going to turn on, if it has no power. Make sure that your monitor is plugged in to the main power supply properly and check the monitor is switched on or not.

  3. Defective Monitor If you have done the above step, and you are seeing a little blue/green light on your monitor, which indicates that your monitor is receiving power. If you are not, jiggle the power cord of the monitor once or twice. If the monitor suddenly comes to life, most probably you have a faulty monitor power cord, or the connector on your monitor is defective. Replace the monitor coed and see if that resolves the issue. If you still face the same problem, then you might need to repair or replace your monitor. Loose Video cable Your computer CPU and monitor are connected via a cable, called a video cable. If this cable is loose, then your monitor is show nothing in it. Most probably, your display will show something like “NO SIGNAL” in this these types of cases. Check the cable properly, is it tightly connected to the both end or not? For a good measure, disconnect the cable from both end and reconnect it once again to try.

  4. Hardware Problem If none of the above solutions have helped you, then you may now very well have a problem with your system. Most of the steps beyond this are out of knowledge for average computer users. They need computer trouble shooting services to solve this. However we list them here in the hope that some of us may find it useful. • Reinstall the video card drivers. • Reinstall the motherboard chipset drivers. • Remove and then re-insert the graphic card. • Check the graphic drivers. • Use a different set of computer RAM and try. Trying the basic steps to repair display problems is OK. If it is hardware related issue, then you really should call a computer trouble shooting service to help you. We at Burnaby Computer Repair serve whole Burnaby and its nearby areas with computer trouble shooting services. No matter, it is residential or commercial; if you need computer troubleshooting services for Burnaby, just contact us. We are 24/7 available for your help.

  5. 4664 Lougheed Hwy City/Town-Burnaby State-British Columbia Phone: 604-438-4357 Vancouver, Canada. Web: http://www.burnabycomputerrepair.com/ Thank You

More Related