1 / 9

Downloading the bitstream

Downloading the bitstream. Connect parallel port to PC. Downloading the bitstream. Connect power supply to XC40-10XL Board Connect Pin 52 to GND Connect Pin 54 to 3.3 V Connect Pin 2 to 5 V Set Bios to ECP Install the XSTOOLs software utility. Downloading the bitstream.

Download Presentation

Downloading the bitstream

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Downloading the bitstream • Connect parallel port to PC

  2. Downloading the bitstream • Connect power supply to XC40-10XL Board • Connect Pin 52 to GND • Connect Pin 54 to 3.3 V • Connect Pin 2 to 5 V • Set Bios to ECP • Install the XSTOOLs software utility

  3. Downloading the bitstream • Type “xssetclk xs40-010xl 100” in DOS

  4. Downloading the bitstream • Place a shunt on the jumper 12(turn off power supply first) • Process downloading • Turn off Power supply and remove the shunt from the jumper 12

  5. Downloading the bitstream

  6. Downloading the bitstream • Use the XS Board Test Utility to test this board • Choose XS40-010XL+ • Set port to LPT1

  7. Downloading the bitstream • The 7-segment LED displays “0”and passed the test

  8. Downloading the bitstream • Drag and Drop the bit stream file on the GXSLOAD program

  9. Downloading the bitstream • Test your design

More Related