1 / 23

Status and Plans of UK Undulator Prototyping R&D

Status and Plans of UK Undulator Prototyping R&D. Yury Ivanyushenkov for HeLiCal Collaboration. ILC Positron source meeting 27 th - 29 th September 2006 RAL. HeLiCal Collaboration. CCLRC Technology Rutherford Appleton Laboratory:

buck
Download Presentation

Status and Plans of UK Undulator Prototyping R&D

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Status and Plans of UK Undulator Prototyping R&D Yury Ivanyushenkov for HeLiCal Collaboration ILC Positron source meeting 27th - 29th September 2006 RAL

  2. HeLiCal Collaboration CCLRC Technology Rutherford Appleton Laboratory: D.E. Baynham, T.W. Bradshaw, A.J. Brummitt, F.S. Carr, Y. Ivanyushenkov, A.J. Lintern,J.H. Rochford CCLRC ASTeC Daresbury Laboratory and Cockcroft Institute: A. Birch, J.A. Clarke, O.B. Malyshev, D.J. Scott University of Liverpool and Cockcroft Institute: I.R. Bailey, P. Cooke, J.B. Dainton, L.J. Jenner, L.I. Malysheva University of Durham, CERN and Cockcroft Institute : G.A. Moortgat-Pick DESY: D.P. Barber, P. Schmid

  3. Scope • ILC Undulator specification • Working technical specification • Undulator prototyping R&D programme • Full scale undulator module • Plans

  4. ILC Undulator specification Electron energy: 150 GeV Undulator period: 10 mm Field on axis: Kx=Ky = 1 or 10 MeV photon in first harmonic ?

  5. Working specification • Undulator period: as close as possible to 10 mm • Field on axis: to produce 10 MeV photons (first harmonic) • Field homogeneity: ≤1% • Vacuum bore: to have beam stay clear of 4 mm => about 5 mm for vacuum bore and about 6 mm for magnetic bore • Superconductor (NbTi) working point : about 80% of short sample critical current. • Module length: 4 m

  6. Undulator prototyping R&D goal • Develop reliable magnetic modelling technique • Develop undulator manufacturing technique • Manufacture and test first full scale undulator module

  7. Magnetic modelling with Opera 2d and 3d • Winding aspect ratio: the highest field on axis is achieved with a rectangular winding with the smallest radial height – to- length ratio (flat conductor). However, taking into consideration the peak field in the conductor, a square shape was found to be optimal. • Winding current: to produce 0.8 T-field on axis a 1000 A/mm2 current density is required (winding - 4mm * 4 mm ; winding internal diameter - 6 mm; period - 14 mm); • (Note: What is the optimal current distribution in the conductor ?) • Field on axis: can be enhanced by the former poles made of magnetic material. The inclusion of magnetic material outside the winding also increases the field on axis. • Peak field: is about twice the field on the axis • for the above configuration, even higher for undulator with iron poles and iron yoke. • (Room for improvement: Nb3Sn ?) • Tolerance effects on central field value: winding radius variation of 0.1 mm leads to 4.2 % change in the on axis field value, the changes induced by changing the winding period by 0.1 mm are at the level of 3%. Region with the highest peak field

  8. Magnetic modelling predictions Conclusion so far: Period of 10 mm means very small bore -unpractical! Realistic figures: Beam stay clear – 4 mm Vacuum bore - 5 mm Winding bore - 6 mm Period - 11.5 mm

  9. Prototypes matrix

  10. Prototypes family Please join us for Undulator R&D Facility Tour on Friday to learn more on manufacture technique

  11. Prototype I results Very successful prototype: Never quenched; Reaches the design field; Quite good field profile

  12. Prototype II results Field on axis varies by -2% for 100 μm increase in winding bore → +/- 1% variation in the field translates into +/- 50 μm precision in winding borefor pitch 14 mm

  13. Prototype III results Period 12 mm Winding bore 6.35 mm 7-Wire Ribbon 8 Layers Wire Cu:Sc = 1.35:1 Measured field = 0.533 T (+/- 0.4% St.Dev., +/- 0.8% max)

  14. Prototype IV results Measured field: 0.91 T +/- 1.6% St.Dev Former: Iron Pitch: 12 mm Winding bore: 6.35 mm Bore: 4.5 mm Winding: 7 wires x 8 layers

  15. Prototypes III and IV: effect of iron Samples 1-3: 080A16 Bright steel (BS970) Sample 4: unknown mild steel Undulator geometry: Period: 12 mm Winding bore: 6.35 mm Winding: 8 layers of 7-wire ribbon Wire current: 200A

  16. Technology status • Former manufacturing - developed techniques for machining formers in aluminium and iron               - accurate gun drilling of bore               - machining of iron spring configuration        - assembly procedure which can be extended to 2m coil module fabrication • Coil winding technology                 - winding based on ribbon technique - winding machine                 - coil terminations                 - coil impregnation with epoxy • Magnet testing and field measurements                 - field measurements - Hall probe movement and positioning at 4K                 - LabVIEW logging software

  17. Short prototypes summary

  18. Undulator 4m module The main features of the undulator module are: • The module will be made up of a magnet ( two sections), helium bath, thermal shield and a cryostat. • The former which is 11.5mm pitch with a 6.35 DIA winding bore. • The former will give 1747mm of magnet length. • The overall length of the cryostat is 4m. • The turret for the services will be in the centre of the cryostat. • Cold mass is cooled by a cryocooler mounted in the tarret. • Thermal shield is pre-cooled by liquid nitrogen to reduce overall cooling time

  19. Undulator 4m module: Layout He bath vessel Thermal shield Two sections of the undulator magnet

  20. Undulator 4m module: Cold mass Undulator magnet assembly

  21. Undulator 4m module: More details Cryostat wall – Thermal shield - He vessel - Magnet connection Turret region

  22. Plans • Complete the Helical Undulator R & D Programme by November 2006 • Design, Manufacture and Test a 4m long Helical Undulator Module by end July 2007: • Complete conceptual design by October 2006 • First 2m-long magnet tested by March 2007 • Second magnet and cryostat manufactured by May 2007 • Module assembly and cold test completed by end July 2007 Note: we are not planning to build a field measurement system for 4-m module -> a proposal by ANL to build such a system looks very attractive and necessary -> a formal collaboration with Argonne should probably start.

  23. Plans (2) • Beam test of 4-m undulator module at Daresbury Lab – fall 2007. • Pre-production prototype – 2008-09. Funds are requested, awaiting decision.

More Related