1 / 73

Ag engineering PE review: Exam prep, I-C economics and statistics

Ag engineering PE review: Exam prep, I-C economics and statistics. Marybeth Lima, Ph.D., P.E. Cliff & Nancy Spanier Alumni Professor Biological & Agricultural Engineering E-mail: mlima1@lsu.edu. Overview. Exam preparation Statistics Economic analysis Throughout :

bridie
Download Presentation

Ag engineering PE review: Exam prep, I-C economics and statistics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Ag engineering PE review: Exam prep, I-C economics and statistics Marybeth Lima, Ph.D., P.E. Cliff & Nancy Spanier Alumni Professor Biological & Agricultural Engineering E-mail: mlima1@lsu.edu

  2. Overview • Exam preparation • Statistics • Economic analysis • Throughout: • You will be doing PE style problems (have your references and calculators ready!) • Ask questions

  3. Part 1: Exam preparation • References (must have) • Time (in preparing for exam and during exam) • Strategies (preparation and test taking)

  4. References • Are an absolutely critical part of your preparation; you will not pass the exam without the proper references • There is a comprehensive list of references at http://www.asabe.org/membership/career-resourcespe-licensure/pei.aspx • Some references are more useful than others

  5. References I used for 80% of the exam problems (must haves) • A Guide to Professional Licensure for Agricultural, Food, and Biological Systems Engineers (see online material) • The notes from this on-line review course (bound) • ASABE Standards (I used the 2000 edition for the 2005 exam and was fine) • The Civil Engineering Reference Manual for the PE exam (soil and water, wastewater, pumps, econ tables, INDEX) • The Mechanical Engineering Reference Manual for the PE exam (HVAC, machine systems, econ tables, fans, INDEX) • You don’t have to bring both PE manuals but have one; I’d recommend civil over mechanical because of broad coverage of topics. If you pick the civil manual, bring ASHRAE Fundamentals or another strong HVAC book.

  6. Other references I used • Wastewater Engineering, Metcalf and Eddy (used 3rd edition) • Henderson, Perry and Young, Principles of Process Engineering • Wood Engineering, Gurfinkel (any wood engineering book will do; you need the tables at the back; you may find in civil vs. ag parts of library) • A soil physics book • MWPS-1: Structures and Environment Handbook (op) • Schwab et al. Soil and water conservation engineering (4th edition)

  7. References I brought and did not use • Irrigation Systems • NRCS handbook parts 650 and 651 • Goering and Hansen, Engine and tractor power • Shuler and Kargi, Bioprocess Engineering Basic Concepts • Salvendy, Handbook of Human Factors • MWPS-8, Swine Housing and Equipment Handbook

  8. Time: preparing for the exam • Get your references and get used to using them (tab Standards) • Make an index of where specific information is located so that you don’t have to search during the exam • Do and re-do all the problems you are given in the on-line course • Do problems in your reference books • Focus your time: general ag engineering knowledge, your expertise area, your secondary knowledge areas • Don’t spend time on what you KNOW you won’t touch (there is something you won’t) • The week before the test, do a sample test using the 8 hr exam format (road test caffeine issues, etc.)

  9. Time during the exam • The exam is designed such that each question takes an average of six minutes • There are 1 minute problems and 15-20 minute problems • Go through the test and answer questions in the following order: • The quick, easy ones that you know you can do • The ones you know that you can do that take a little more time • Guess (with gusto!) at the ones that are beyond your scope • Guess the same letter every time • Go back and do the ones that you think you can do that are time consuming • If there’s time, go back and check your answers; also go to the ones that are bugging you (if there are any)

  10. Strategies • You need to develop problem recognition • You need to develop flexible thinking • Pick what you will not answer and guess with pleasure (I guessed at 10% of the questions on the exam) • Many times you can eliminate two of the four choices easily (even with areas you know nothing about) • Knowing fundamental knowledge is critical (the PE reference manuals in civil and mechanical were invaluable)

  11. Strategies • You need to answer ~60% of the problems correctly to pass • Having a strong base in general agricultural engineering knowledge will “take you over the top” • My experience: for the various expertise areas, about 60% of the problems were solvable without expert knowledge in the area (as long as you had good references and knew where to look for info) • The other 40% of the expertise questions were expert knowledge level, involved problems (I skipped P&M, irrigation, and structures/environment expert problems)

  12. 1-C: Economics and statistics • A broad area with applications “across the board” (5% of exam questions) • Statistics is commonly used because you need descriptive information to help interpret data • Economics is commonly used for making engineering decisions • My suggestion for stats and econ: use the CE or ME PE reference book (Lindeburg) • Chapter on statistics • Table at the back (z-chart) • Get a t-chart as well!! • Chapter on engineering economic analysis • Full interest tables at the back

  13. Statistics basics • Measures of central tendency • Mean, median, mode • Measures of dispersion • Standard deviation, variance, range, coefficient of variance • For PE: have equations to determine measures of central tendency and dispersion • There are slight differences in equations depending on if you are working with a population or a sample

  14. Statistics: Distributions • A number of distributions can be used to describe various data sets or can be used to solve engineering problems in relation to these data sets • Sampling distributions involving means: • Normal (aka Gaussian): our focus • Student t distribution • Sampling distributions involving variance: • F distribution • Chi-Square

  15. Normal distribution: review • Symmetrical distribution with mean m and standard deviation s • Area under curve represents 100% of possibilities • 50% to the right of the mean • 50% to the left of the mean • A value is higher than the mean for this distribution to the right of the mean, lower to the left of the mean • x represents where you are in the distribution; z is the number of standard deviations away from the mean that you are • z is positive to right of mean • z is negative to left of mean

  16. Reading the z-chart

  17. Typical PE style problems • The population mean for college students’ heights is 67 inches, and the population standard deviation is and 4 inches. These data are normally distributed. • What percentage of college students have heights less than 71 inches?

  18. Solution

  19. In what range would you find the middle 70% of the data? (pick closest z value, do not interpolate)

  20. Solution

  21. You try this one: • 90% of college students have heights greater than what value?

  22. Solution

  23. Sampling • We almost never work with populations • We take samples and try to draw conclusions about a population based on a sample • Use z chart for large samples (n>30) • Use t chart for small samples • Your statistical equations change a little to reflect the fact that you have a sample

  24. Confidence intervals • Commonly used in research and process control • 95% confidence intervals are common • For example, what is the 95% confidence interval of a set of 50 data points; the mean of this data set is 150 and the standard deviation is 15.

  25. Solution

  26. Hypothesis testing • Used to compare means values to each other to determine if they’re significantly different • Considerations • What kind of hypothesis test is it? • Sample mean (large or small) compared to a standard • Sample mean (large or small) compared to another sample mean (large or small) • Will you use a t chart or a z chart? • Is the test one tailed (where directionality matters) or two tailed (when only difference between values matters)

  27. Steps to hypothesis testing • Ask, “what am I trying to show?” • this is the alternate hypothesis • The null hypothesis contains all the other possibilities • Construct the acceptance and rejection region for the hypothesis • Calculate the test statistic • Determine whether to accept or reject the null hypothesis (you always test the null)

  28. Reading a t chart

  29. Example, hypothesis testing • A biodiesel plant has a standard daily production rate that is normally distributed with a mean of 880 tons/day. Sampling the plant once a day for 35 days yielded a mean output of 870 tons/day with a standard deviation of 20 tons per day. Do the data present sufficient evidence to show that the output is less than the standard?

  30. 1. Construct alternate and null hypotheses • Problem statement: show output is less than standard • Ha: m < 880 • Null is every other possibility: Ho: m ≥ 880 • From this statement, we can see that directionality (< or >) matters: one-tailed test • If directionality doesn’t matter (show that the means are different): two-tailed test

  31. 2. Construct acceptance/rejection region • Start by drawing the standard that your sample is being compared to • You need to know four things: • Which side of the mean your sample mean falls on (to right/left of mean) • What is alpha? (standard = 0.05) • One-tailed or two tailed test • Will you use the t-chart or z-chart?

  32. The four things: • Sample mean is 870, which is less than 880, so you’re to the left of the mean • Alpha is not given, assume 0.05 • Directionality matters, (<), one-tailed • n = 35, >30, use the z chart

  33. Acceptance/rejection region

  34. Calculate the test statistic

  35. Draw the conclusion: accept or reject the null hypothesis • z-crit = -1.645 • z-calc = -2.95 • If you draw z-calc on your acceptance/rejection region, it falls into the portion of the curve in which the null is rejected • Thus, reject the null and conclude that Ha is true: yes, sufficient evidence exists for showing that the mean output of the plant is less than 880

  36. Drawing

  37. Statistics summary • General Tips: • Get a general reference with equations and make sure you have a z chart and a t chart • get z from A, and A from z • Know confidence intervals • Look at process control (2 and 3 sigma limits)

  38. Statistics summary, hypothesis testing • Very cookbook approach • When you draw the acceptance/rejection region, draw the mean that you are comparing your sample to first • When comparing two small samples, arbitrarily choose one and make sure you keep the means properly situated from a numerical standpoint • Also remember that sample size is POOLED or added, so df= n1 + n2 - 2 • Remember that you always test the null hypothesis, which leads to a conclusion about the alternate

  39. 1-C: Engineering economic analysis • Typically easy questions on the exam if you know how to use factor tables (slang, interest tables) • Tabulated in the ME reference manual, A-132-150 or CE manual A-112-130 • Types of problems in engineering economic analysis • Decision making: you have a material you’re trying to choose, or a part, or a machine. Compare which is most economical given present cost, maintenance costs, etc. • Replacement/retirement analysis (when should you replace or retire a product?) • Rate of return problem (to find percentage return on an investment) • Break even point on an investment • Loan repayment (how long will it take) • Economic life analysis (life cycle costs) • Benefit/cost analysis (do the benefits outweigh the costs)

  40. Engineering econ • Almost all engineering econ problems will involve cashflows; it is like a material balance using money instead of mass. • Types of cash flows: • Single payment cash flows (P or F) • P = present value of money • F = future value of money • Uniform series cash flow (A) • An amount that is the same every month, like a house or car payment • Gradient series cash flow (not used much) (G) • A value that goes up or down the same amount every time period • You use types of cash flows to compare alternatives and solve econ problems

  41. Engineering econ • Cash flow problems can be calculated using equations or are tabulated for fast problem solving

  42. Example • If you put $1,000 into a savings account and the annual interest rate on the account was 6%, how much money would be in the account after 5 years? • The equation to convert a present value to a future value is

  43. Engineering econ • (1 + i)n is called the single payment compound amount factor, and is tabulated for various combinations of i (interest rate) and n (time period) • The notation (symbol) for the single payment compound factor is (F/P, i%, n) • This notation indicates that F (future $ amount) is unknown, that you have P (the present value), and given the interest rate (i) in percent and the time period (n), you can find F.

  44. Engineering econ • Back to our example: If you put $1000 into a savings account and the annual interest rate on the account was 6%, how much money would be in the account after 5 years? • Solve by equation: F = 1000(1 + 0.06)5 = $1338.23 • Solve by interest table

  45. Engineering econ

  46. Engineering econ • Example solve by interest table: • Go to F/P column with n = 5, for table with i = 6%: Factor = 1.3382 • F = ($1000) 1.3382 = $1338.2

  47. Engineering econ • Biggest thing to keep in mind: make sure that your UNITS match; interest rate, n, and dollar amounts may be given on a different basis • You try: How much should you put into a 10% effective annual rate savings account in order to have $10,000 in four years? (10% interest table included on next page)

  48. Engineering econ

  49. Engineering econ • You are given a future amount of money (F) and ask to solve for a present amount of money • Solve using the i = 10% interest table, with n = 4 years; (P/F, 10%, 4) = 0.6830 • P = F (P/F, 10%, 4) = $10,000*0.6830 = $6,830 • Notice that n is given in years and i is given as an annual interest rate (per year); units match

  50. Engineering econ • Maintenance costs for a machine are $250/year. What is the present worth of these maintenance costs over a 12 year period if the annual interest rate is 10%? • Given: • Find:

More Related