1 / 50

CHAPTER 13

CHAPTER 13. Quality Assurance in Film/Screen Mammography. PURPOSE OF QUALITY ASSURANCE. … to attempt to improve and stabilize the entire process of patient care, to avoid, or at least minimize, issues that may occur. PURPOSE OF QUALITY ASSURANCE. Quality assurance Quality images

brianjames
Download Presentation

CHAPTER 13

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHAPTER 13 Quality Assurance in Film/Screen Mammography

  2. PURPOSE OF QUALITY ASSURANCE … to attempt to improve and stabilize the entire process of patient care, to avoid, or at least minimize, issues that may occur

  3. PURPOSE OF QUALITY ASSURANCE • Quality assurance • Quality images • Qualified reader • Excellent quality of equipment and supplies • Provide top-quality results to the patient and her physician • Quality control – highlight inconsistencies, diagnose problems, resolve quickly

  4. HISTORY OF QA IN MAMMOGRAPHY • Before 1992, at discretion of each facility • 1987, effort to standardize by ACR • ACR MAP – included examination of equipment, films and processing, image quality, and facility personnel • 1992, ACR published guidelines • Updated several times with change in technology • SBBAP • BUAP • BICOE

  5. MQSA AND FDA • Major breakthrough in standardizing the quality of mammography • FDA – all facilities must first be certified by FDA to perform mammograms • Approved accreditation bodies: ACR, SAR, SIA, STX • Annual inspections • Final regulations are national quality standards; based on MQSA of 1992 and MQSA Reauthorization of 1998

  6. ESTABLISHING A QA PROGRAM Must address certain standards: • Equipment • Compatibility • Purchase specifications • Monitoring and maintenance • Standards for image quality • Technical evaluation procedures

  7. ESTABLISHING A QA PROGRAM • Personnel • Assignment of responsibility • Training • Policy and corrective measures • Record keeping • Manuals • Communication channels • Review

  8. DOCUMENTATION SCHEDULE

  9. BI-RADS ASSESSMENT CATEGORIES • Category 0: Need additional imaging evaluation and/or prior mammogram • Category 1: Negative • Category 2: Benign finding(s) • Category 3: Benign finding – Initial short-interval follow-up suggested

  10. BI-RADS ASSESSMENT CATEGORIES • Category 4: Suspicious abnormality – Biopsy should be considered • Category 5: Highly suggestive of malignancy – Appropriate action should be taken • Category 6: Known biopsy-proven malignancy– Appropriate action should be taken

  11. COMPONENTS OF A QA PROGRAM • Standards of performance • Equipment testing • Documentation of personnel training and continuing education • Review of the facility’s quality

  12. TESTING SCHEDULE

  13. EQUIPMENT TESTING • Most time consuming • All QC tests performed by physicist and the technologist • Reviewed quarterly by radiologist • Some equipment requires more frequent testing • The larger the facility, the more time involved • Each test has a purpose

  14. TECHNOLOGIST’S TESTS • Sensitometry • Darkroom cleanliness • Viewboxes • Phantom imaging • Visual checklist • Fixer retention • Repeat/reject analysis • Compression check • Screen/film contact • Darkroom integrity and fog test

  15. SENSITOMETRY • Processor QC • Ensures that delicate chemical balance used for processing remains consistent

  16. SENSITOMETRY

  17. SENSITOMETRY

  18. DARKROOM CLEANLINESS • Not mandatory “test” but should be performed and documented daily • Cleanliness will reduce artifacts • Use black lights to help identify problematic areas • Thoroughly clean darkroom weekly

  19. VIEWBOXES • Clean weekly to remove smudges, dust, grease pencil marks, etc. • Test bulbs with light meter • Use same type of bulb throughout facility • Vacuum inside box to remove dust

  20. PHANTOM IMAGING • The Phantom – square acrylic block with wax insert containing simulated masses, fibrils, and calcium specks of varying sizes, approximately 4.5 cm thick

  21. PHANTOM IMAGING • Radiographic image obtained of phantom • Scored according to what is “seen” • The higher the scores of the phantom image, the better the imaging system • 4-mm thick disk included to determine density difference

  22. PHANTOM IMAGING

  23. PHANTOM IMAGING • Technique • Always use same cassette and photocell placement • Always use same technique used for patients • Document consistency of unit • Manufacturer service personnel can use data to determine problem

  24. PHANTOM IMAGING • Analysis • As per MQSA, reading at center must be at least 1.20 OD • OD should not vary by more than ± 0.20 OD • Must achieve the minimum score established by facility’s accrediting body and the FDA • Compare readings with previous scores

  25. VISUAL CHECKLIST • Indicator lights • Locks • Detents • Ensure mechanically stable • Properly working • Report any malfunctioning equipment immediately

  26. FIXER RETENTION • Quantity of fixer indicates how long film will keep its image quality • Performed on clear or unexposed area of processed film • MQSA – no more than 5 µg/cm2 of fixer should remain • Ensure recommended rates are used

  27. FIXER RETENTION

  28. REPEAT/REJECT ANALYSIS • Evaluate the reason films are repeated or thrown out • Log number of rejected films by categories • Determine length of time • Can help to pinpoint problem areas in department • Once area of inefficiency is located, take steps to correct • May be equipment or personnel

  29. COMPRESSION CHECK • Image QA test • Safety test • Check pressure applied to breast during compression

  30. SCREEN/FILM CONTACT • Very critical in mammography • Obtain image of fine-mesh test-object

  31. SCREEN/FILM CONTACT

  32. DARKROOM INTEGRITY AND FOG TEST • Need to assure fogging not occurring from white light • Turn off all lights • Look for leaks in ceiling, around doors, seals around equipment • Personnel wearing clothing, jewelry, Band-Aids with luminescent or phosphorescent qualities • Often due to deteriorated safelight filter or position of safelight

  33. PHYSICIST’S TESTS • Automatic Exposure Control Performance • Kilovolt peak Accuracy and Reproducibility • Focal Spot Condition • Beam Quality Assessment (Half-Value Layer) • AEC Reproducibility and Breast Entrance Air Kerma • Dosimetry (Average Glandular Dose) • X-ray Field/Light Field/Image Receptor/Compression Paddle Alignment • Uniformity of Screen Speed • System Artifacts • Radiation Output • Decompression

  34. AUTOMATIC EXPOSURE CONTROL PERFORMANCE • Ensures exposures have consistently reproducible quality at varied breast thicknesses and kilovolt peaks • Determines percentage of density change between density control settings • Physicist takes a number of exposures using phantom material, compare OD

  35. KILOVOLT PEAK, ACCURACY AND REPRODUCIBILITY • To determine if kilovolt peak indicated on unit is the kilovolt peak produced by the unit • Needs to be consistently reproducible • Kilovolt peak meter • Must be accurate within ±5% of set value • Cannot vary more than the standards set by MQSA

  36. FOCAL SPOT CONDITION • Determined by obtaining a bar-pattern image on film/screen combination that is used clinically • Bar pattern placed in certain position relative to anode-cathode axis • Must meet specified standards set by MQSA

  37. BEAM QUALITY ASSESSMENT (HALF-VALUE LAYER) • Determines beam quality • Must be adequate to minimize the dose of radiation given to the patient • Determined by making x-ray exposure with and without an attenuator in the path of x-ray beam • Each kilovolt peak measured must be ≥kVp/100

  38. AEC REPRODUCIBILITY AND BREAST ENTRANCE AIR KERMA • Measures breast-entrance exposure or entrance skin exposure, in exposures taken with AEC on average patient • Represents amount of energy deposited per unit mass or air • Determines if unit consistently and reproducibly delivers the same dose over several exposures • Variations must measure less than 0.05

  39. DOSIMETRY (AVERAGE GLANDULAR DOSE) • Calculation derived from measured HVL and breast-entrance exposure obtained from two preceding tests • Represents amount of energy absorbed by glandular tissue in breast of average size and tissue composition from single x-ray exposure • MQSA specifies may not exceed 3.0 mGy, 0.3 rad, or 300 mrad per exposure

  40. X-RAY FIELD/LIGHT FIELD/IMAGE RECEPTOR/COMPRESSION PADDLE ALIGNMENT • Verifies: • That as much breast tissue as possible is shown on each patient’s films • That technologist can accurately determine location of radiation field • That the field of radiation is aligned with image receptor • That the patient does not receive unnecessary radiation exposure • Components must be aligned to each other • MSQA allows little tolerance in deviation of alignment

  41. UNIFORMITY OF SCREEN SPEED • Ensures all screens in cassettes provide same amount of density to all images • Obtain identical exposures on all cassettes • Calculate density to determine optical density range • MQSA states optical density range cannot exceed 0.30 OD

  42. SYSTEM ARTIFACTS • Use same cassettes as used for patients • Obtain 2 images of homogenous density • Feed films into processor, one length-wise, one width-wise • Analyze all films • Once it is determined that artifacts exist, identify cause and correct problem

  43. RADIATION OUTPUT • Measurement of x-ray tube’s efficiency • Ensures unit produces consistent, homogenous, uniform beam and has enough energy to produce quality image • MQSA requires minimum output of 7.00 mGy per second (800 mR/sec) • Must be able to maintain the minimum output averaged during a 3-second long exposure

  44. DECOMPRESSION • Mechanical safety check • Ensure automatic decompression device will engage after each exposure or when power is interrupted • Test to confirm override is operational • Confirm manual override is operational • Equipment without decompression system is not acceptable for obtaining patient examinations

  45. RADIOLOGIST INVOLVEMENT • Not responsible for performing equipment testing • Responsible for reviewing QA program • Rely on technologists and physicists • Responsible for: • Reviewing Medical Outcomes Audit annually • Documenting dates and results of audit • Informing other radiologists in facility of results • Documenting follow-up to audit

  46. MEDICAL OUTCOMES AUDIT

  47. MEDICAL OUTCOMES AUDIT

  48. MEDICAL OUTCOMES AUDIT

  49. MEDICAL OUTCOMES AUDIT

  50. MEDICAL OUTCOMES AUDIT

More Related