1 / 26

Day 1

Day 1. Sritrusta Sukaridhoto. UTP 5e cable/patch. Straight-through. Crossed-over. Tools. Step-by-step (1). Skin off the jacket Un-twist each pair Place the order Recheck use diagram. Step-by-step (2). Hold the grouped Cut straight all of the wires. Step-by-step (3).

belita
Download Presentation

Day 1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Day 1 Sritrusta Sukaridhoto

  2. UTP 5e cable/patch

  3. Straight-through

  4. Crossed-over

  5. Tools

  6. Step-by-step (1) • Skin off the jacket • Un-twist each pair • Place the order • Recheck use diagram

  7. Step-by-step (2) • Hold the grouped • Cut straight all of the wires

  8. Step-by-step (3) • Insert the wires into connector (pin facing up)

  9. Step-by-step (4) • Push moderately hard to assure that all of the wires have reached the end of the connector

  10. Step-by-step (5) • Place the connector into crimp tool, and squeeze hard so that the handle reaches it’s full swing

  11. Step-by-step (6) • Now go and test it !

  12. Wire map

  13. Cisco Cable system

  14. X21 • X21

  15. V35 • V35

  16. RS232

  17. Connecting Router to ISP (WAN)

  18. Console Cable • Plug it into console port

  19. Plug Console Cable • Serial Cable into Computer at Serial Port • UTP Cable into Console Port at Router

  20. Plug the FO

  21. Prepare the FO Cable • Plug it into Router and Switch

  22. Dial-UP

  23. Plug Modem into PC using Serial Cable • Plug RJ11 Cable into modem and PABX • Use Adaptor as AC-power

  24. How-to Dial UP • Use Gnome-ppp (Linux), Dialup networking (Windows) • Username : goodle • Password : goodle • Number to dial : 101

  25. Wireless-LAN

  26. Turn-on WIFI • Get ESSID : “eepishotspot” • Get IP • Access Internet

More Related