plant design for biofuel production using microalgae n.
Download
Skip this Video
Loading SlideShow in 5 Seconds..
PLANT DESIGN FOR BIOFUEL PRODUCTION USING MICROALGAE PowerPoint Presentation
Download Presentation
PLANT DESIGN FOR BIOFUEL PRODUCTION USING MICROALGAE

Loading in 2 Seconds...

play fullscreen
1 / 60

PLANT DESIGN FOR BIOFUEL PRODUCTION USING MICROALGAE - PowerPoint PPT Presentation


  • 288 Views
  • Uploaded on

PLANT DESIGN FOR BIOFUEL PRODUCTION USING MICROALGAE. FANTASTIC FOUR. Hemavathi Krishnan Loh Yin Chyuan Nur Fardihah Tan Boon Yee. INTRODUCTION Biomass can be converted to energy by biological or thermochemical methods. - direct combustion - indirect processes

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PLANT DESIGN FOR BIOFUEL PRODUCTION USING MICROALGAE


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
    Presentation Transcript
    1. PLANT DESIGN FOR BIOFUEL PRODUCTION USING MICROALGAE

    2. FANTASTIC FOUR Hemavathi Krishnan Loh Yin Chyuan NurFardihah Tan Boon Yee

    3. INTRODUCTION Biomass can be converted to energy by biological or thermochemical methods. - direct combustion - indirect processes Microalgae - most promising renewable feedstock for biofuel production and biorefineries. Choice of biomass depends on: 1. Social 2. Environmental 3.Industrial factors

    4. Microalgae (3rd generation feedstock) i) does not compete for arable land and portable water. ii) reduce freshwater consumption. iii) low lignin content (high fermentable sugar). iv) their saccharification is much easier. v) being a more promising and sustainable biomass sources for bioethanol production (Harunet al., 2010; Ho et al., 2012).

    5. List of microalgaes • C. vulgaris (CCAP 211/11B) • C. vulgaris (P12) • C. reinhardtii UTEX 90 • C. reinhardtii • Tetraselmissubcordiformis • S. obliquusCNW-N • C. vulgaris • C. vulgaris FSP-E

    6. Comparison of the carbohydrate production performance of different microalgae • C. vulgaris FSP-E can achieve the highest carbohydrates productivity • Information concerning the composition of carbohydrates produced by microalgae is also crucial for future applications of microalgae feedstock.

    7. Comparison of biomass productivity and carbohydrate productivity of microalgae strains

    8. Types of biofuels from microalgae 1)Biodiesel • After extraction process, the resulting microalgal oil can be converted into biodiesel through a process called transesterification. • Transesterification– reaction consist of transforming triglycerides into fatty acid alkaly esters in the presence of an alcohol , catalyst and glycerol as a by product (Vasudevan, 2008). • Microalgal oil contains a high degree of polyunsaturated fatty acid compared to vegetable oils, which makes it susceptible to oxidation in storage and therefore reduces its acceptibility for use in biodiesel ( Dragone et al., 2010).

    9. 2) Bioethanol • Current interest in producing bioethanol are focusing on microalgae as a feedstock for fermentation process. • Microalgae provide carbohydrates and protein as a carbon sources for fermentation. • Result showed a maximum bioethanol concentration of 3.83g/L obtained from 10g/L of lipid-extracted microalgae debris (Harun et al., 2010). • Fermentation process requires less consumption of energy and simplified process compared to biodiesel production system. • Carbon dioxide produced as by-product from fermentation process can be recycled as carbon sources to microalgae in cultivation process.

    10. 3) Biogas • Produced naturally from break down of organic material. • Microalgae can form biogas because of its high sugar content. • Biogas can be burned directly in an engine or a cooker or upgraded for use in car engines or for generating electricity . • Methane gas is the main ingredient of biogas which can be used as fuel. • An anaerobe micro-organisms is used to breakdown the microalgae without oxygen.

    11. Current Technologies 1)Cultivation System Open air System • The classical open-air cultivation system comprise lakes and natural ponds, circular ponds, raceway ponds and inclined system (Dragone et al., 2010). • These system are easier and less expensive to build, operate more durably and have a larger production capacity compare to closed system. • They can utilize sunlight and nutrients can be provided through runoff water from nearby land area (Carlssonet al., 2007).

    12. Generally ponds are susceptive to weather conditions, not allowing control of water temperature, evaporation and lighting, which make these system dependent on the prevailing regional climate conditions. • Natural and artificial ponds i)only viable when a series of conditions are met. ii)the existence of favorable climatic conditions and sufficient nutrients in order to grow the microalgae. • Inclined system i)the only open-air system which achieves high sustainable cell densities (up to 10 g/L). ii)very well suitable for algae such as Chlorella, which can tolerate repeated pumping ( Borowitzka, 2005).

    13. iii) Turbulence is created by gravity cause the culture suspension flowing from the top to the bottom of a sloping surface. • Raceway ponds i) Typically made of a closed loop, oval shaped recirculation channels, with mixing and circulation required to stabilize algae growth and productivity. ii) Algae broth and nutrients are introduced in front of the paddlewheel and circulated through the loop to the harvest extraction point. iii) The paddlewheel is in continuous operation to prevent sedimentation.

    14. Figure 1 Raceway ConfigurationSource: http://pubs.ext.vt.edu/442-880/ (accessed November 4, 2008).

    15. 2) Photobioreactors (PBRs) • reduced contamination risk, no carbon dioxide losses, reproducible cultivation conditions, controllable hydrodynamic and temperature, and flexible technical design (Pulz, 2001). • Tubular photobioreactor a) can be horizontal, vertical, incline and conical shaped (Molina et al., 2001). b) microalgae can be circulated through the tubes by a pump, or preferably with airlift technology. c) relatively cheap, have a large illumination surface area and have fairly good biomass productivities. • Flat photobioreactors a) a thin layer of a very dense culture is mixed or flown across a flat transparent panel, which allows radiation absorbance in the first few millimeter thickness.

    16. b) Suitable for mass cultures of microalgae due to the low accumulation of dissolved oxygen and high photosynthesis efficiency (Brennan et al., 2010). • Column photobioreactor a) Column PBRs are occasionally stirred tank reactor ( Sodczuket al., 2006), but more often bubble column (Chiniet al., 2006), or airlifts (Krichnavaruket al., 2007). b) Offer the most efficient mixing, highest volumetric gas transfer rates and the best controllable growth conditions. c) Vertical bubble columns and airlift cylinders can attain substantially increased radial movement of fluid that is necessary for improved light–dark cycling.

    17. Source: Giulianoet al., 2010 Table 1 Advantages And Limitation Of Microalgae Culture System

    18. BLOCK FLOW DIAGRAM

    19. Processing Steps CO2 sunlight oxygen Algae

    20. Processing Steps CO2 sunlight oxygen Algae liquid dlute slurry Concentration

    21. Processing Steps CO2 sunlight oxygen Algae liquid dlute slurry Concentration concentrated slurry acid Hydrolysis heat

    22. Processing Steps CO2 sunlight oxygen Algae liquid dlute slurry Concentration concentrated slurry acid alkali Hydrolysis Fermentation heat cooling yeast

    23. Processing Steps CO2 sunlight oxygen Algae liquid dlute slurry ethanol Distillation Concentration concentrated slurry “beer” acid alkali Hydrolysis Fermentation heat cooling yeast

    24. Processing Steps CO2 sunlight oxygen Microbial Cultivation System Algae liquid dlute slurry distillage ethanol Distillation Concentration concentrated slurry “beer” acid alkali Hydrolysis Fermentation heat cooling yeast

    25. Processing Steps biogas CO2 sunlight oxygen Microbial Cultivation System liquid digestate Algae liquid dlute slurry stillage ethanol Distillation Concentration concentrated slurry “beer” acid alkali Hydrolysis Fermentation heat cooling yeast

    26. Processing Steps biogas CO2 sunlight oxygen Microbial Cultivation System liquid digestate Algae liquid dlute slurry stillage ethanol Distillation Concentration concentrated slurry “beer” acid alkali Hydrolysis Fermentation heat cooling yeast

    27. Processing Steps biogas CO2 sunlight oxygen Microbial Cultivation System liquid digestate Algae liquid dlute slurry stillage ethanol CO2 Distillation Concentration CO2 concentrated slurry “beer” acid alkali CO2 Hydrolysis Fermentation heat cooling yeast

    28. UPSTREAM PROCESSING

    29. UPSTREAM PROCESSING

    30. UPSTREAM PROCESSING

    31. UPSTREAM PROCESSING

    32. UPSTREAM PROCESSING

    33. UPSTREAM PROCESSING

    34. UPSTREAM PROCESSING (Starch Liquefaction) Liquefaction – transforms starchy raw material into a fermentable mash

    35. Saccharification Enzymatic Chemical Involving higher temperature, pressure, and addition of acid and alkali Short hydrolysis time required Resulting in production of inhibitors (furfural and 5-hydroxymethylfurfural) which repress biofuels production and also require costly downstream treatment of waste • Involving the use of cellulases, amylases and glucoamylases • Lower equipment cost (conducted at mild conditions) • Higher glucose yields without sugar-degradation products or toxic by-product which may affect fermentation

    36. ENZYMATIC SACCHARIFICATION Cellulose Starch

    37. SSF Simultaneous saccharification and fermentation • Process of enzymatic hydrolysis occurs at the same time as fermentation in the same vessel Other available fermentation techniques: • Separate hydrolysis and fermentation (SHF), but not cost effective • Simultaneous saccharification and co-fermentation (SSCF), but not for this case.

    38. SSF Glucoamylase Glucosidase Glucanase CO2 Fermenter Carbohydrate Fermenter Bioethanol Inoculum 72 hours

    39. SSF Hydrolysis of starch (polysaccharides) into sugars by enzymatic activity and fermentation into ethanol Co2 generated can recycle to be used for microalga cultivation

    40. SSF Glucose consumed by yeast during the fermentation

    41. Downstream Process

    42. Downstream process DistillationDistillation is a process of separating ethanol from mixture through vaporisation and condensation based on different volatility.

    43. Dehydration Ethanol vapor under pressure passes through a bed of molecular sieve beads. The bead's pores are sized to allow absorption of water while excluding ethanol.

    44. Centrifugation • Centrifuge is used to separate distillage from distillation of previous step into solid and liquid state. • Solid state distillage can be digested for methane production to recover the remaining energy through an anaerobic digestion process. • Solid state distillage can be used as Animal feed.

    45. Microalgae cultivation system • Liquid state distillage (Wastewater) that produced will be used to cultivate microalgae. • Microalgae have the ability to remove toxic compounds from the wastewater. • Microalgae play a major role in aerobic treatment of waste in the secondary treatment process.

    46. Self flocculation • This stage is to aggregate microalgalcells from cultivation • system of previous step to increase the size. • Addition of flocculants neutralises or reduces the negative • surface charge that carried by microalgae itself. • Ferric chloride, aluminiumsulphateand ferric sulphate.

    47. Sedimentation • Sedimentation of the flocculated algae cell to recover • the microalgae biomass. • This step is to prepare high concentrated algae cell for • further process.

    48. Environmental factors affecting microalgae carbohydrate production • To enhance the economic feasibility of using algal carbohydrates for biofuels production, productivity needs to be improved. • Carbohydrate content of microalgae could be enhanced by the use of cultivation strategies, for instance: i) Irradiance (A.Sukenik, 1991) ii) Nitrogen depletion (D’Sauzaet al., 2000) iii) Temperature variation (De Oliveira et al., 1999) iv) pH shift (Khalil et al., 2010) v) Carbon dioxide supplement (Aroujo and Garcia, 2005)

    49. Irradiance • For autotrophic growth of microalgae – energy can be stored in form of carbohydrates or lipids in microalgal biomass. • Configuration of microalgae cultivation should be designed to provide uniform and sufficient irradiance to the cells. • Light intensity also found to affect carbohydrates accumulation in microalgae. • Illumination can offer light energy that is further stored in the form of carbohydrates or lipids in the microalgalbiomass • Increase light intensity (30-400umol/m2s) could slightly increase the accumulation of carbohydrates(Carvalhoet al., 2009). • Accumulation of carbohydrates not only depends on light intensity, but also on other environmental parameter.

    50. Nitrogen Depletion • Nitrogen - an essential nutritional component for growth of microalgae (Turpin, 1991) • Variety of nitrogen sources can be utilized by microalgae, while different nitrogen source may influence their biochemical composition. • Microalgal strains could transform protein or peptides to lipids or carbohydrates as energy reserve component when it under nitrogen-depletion condition. • There was a competition between carbohydrates synthetic and lipids because of the metabolic pathway associated with synthesis and degradation of energy-rich compound are closely linked (Ho et al., 2012; RismaniYazdiet al., 2011; Y.Chisti 2007).