1 / 8

Construction Safety Unit V Assignment – Electrical Hazards

Construction Safety Unit V Assignment – Electrical Hazards. Student Name: Date: Instructions: Each of the following slides contains a construction site photo that depicts one or more electrical hazards. There is also an electrical theory math slide following the photo slides.

annettea
Download Presentation

Construction Safety Unit V Assignment – Electrical Hazards

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Construction SafetyUnit V Assignment – Electrical Hazards • Student Name: • Date: • Instructions: • Each of the following slides contains a construction site photo that depicts one or more electrical hazards. There is also an electrical theory math slide following the photo slides. • Examine each photo, and answer the questions in the notes section of each slide. Make sure to also move the red arrow (provided in the bottom left corner of each slide) to point toward the location of the hazard. Also, provide an answer in the notes section of the electrical theory math slide. Show your work for the calculation that you are asked to perform. • Save the completed presentation, and upload it to Blackboard. • Be sure to put your name at the top of this first slide!

  2. Figure 1 (Occupational Safety and Health Administration [OSHA], n.d.-a)

  3. Figure 2 • (OSHA, n.d.-b)

  4. Figure 3 • (OSHA, n.d.-c)

  5. Figure 4 • (OSHA, n.d.-d)

  6. Figure 5 • (OSHA, n.d.-e)

  7. Circuit #1: Series Electrical Theory Math Quiz Calculate the current (in amperes) flowing through the following two circuits given the following: Voltage = 125 R1 = 15 Ohms R2 = 20 Ohms R3 = 5 Ohms Be sure to show your work! Hint: You will find guidance on how to complete this calculation in the unit lesson. Circuit #2: Parallel

  8. Reference Occupational Safety and Health Administration. (n.d.-a). Figure 1 [Image]. From Recognize any hazard(s)? [PowerPoint presentation]. Retrieved from https://www.osha.gov/dte/outreach/construction/focus_four/electrocution/electr_hazrec.ppt Occupational Safety and Health Administration. (n.d.-b). Figure 2 [Image]. From Recognize any hazard(s)? [PowerPoint presentation]. Retrieved from https://www.osha.gov/dte/outreach/construction/focus_four/electrocution/electr_hazrec.ppt Occupational Safety and Health Administration. (n.d.-c). Figure 3 [Image]. From Recognize any hazard(s)? [PowerPoint presentation]. Retrieved from https://www.osha.gov/dte/outreach/construction/focus_four/electrocution/electr_hazrec.ppt Occupational Safety and Health Administration. (n.d.-d). Figure 4 [Image]. From Recognize any hazard(s)? [PowerPoint presentation]. Retrieved from https://www.osha.gov/dte/outreach/construction/focus_four/electrocution/electr_hazrec.ppt Occupational Safety and Health Administration. (n.d.-e). Figure 5 [Image]. From Recognize any hazard(s)? [PowerPoint presentation]. Retrieved from https://www.osha.gov/dte/outreach/construction/focus_four/electrocution/electr_hazrec.ppt

More Related