1 / 26

NNAI – practice L2

NNAI – practice L2. BJT differential amplifier. Main parameters of used transistors: NPN: Is = 2.10 -16 A = 100 Output characteristic slope in active region = 0.5 μ A/V at Ic=30uA (V E =60V) PNP: Is = 2.10 -16 A  = 50

amberwhite
Download Presentation

NNAI – practice L2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. NNAI – practice L2 BJT differential amplifier

  2. Main parameters of used transistors: NPN: Is = 2.10-16 A • = 100 Output characteristic slope in active region = 0.5 μA/V at Ic=30uA (VE=60V) PNP: Is = 2.10-16 A  = 50 Output characteristic slope in active region 1 μA/V při Ic=30uA (VE=30V) Nore: precise VTforT=300K is25.851241 mV Spice models can be find at http://www.umel.feec.vutbr.cz/~prokop/MNAI/MNAI.htm

  3. Need of matching !!!!! Variance of the „hipo“ R over process and temperature in AMIS CMOS07: Rhipotyp = 2000 Ω/□ Rhipomin = 1600 Ω/□ Rhipomax= 2400 Ω/□ tc1 = -21.10-4 tc2 = 5.10-6 Variance Rhipo [Ω/□] pro t = (0-90)°C

  4. Design bipolar differential stage with transconductance gm: 1

  5. 1

  6. Determine input voltage asymmetry of the BJT differential stage knowing that due to the lithography variance the ratio of the BJT emitter areas is 1,1.  means: Is1 = 1.1 Is2 Make sure the input offset is not ISS dependent… 2

  7. 2

  8. Design differential output amplifier and gain A=10 Its quiescent current consumption is 40μA. VC = 5V -suppose Vbe = 0.65V 3

  9. To satisfy demand of current consumption For voltage GAIN: Simulation  PSpice 3

  10. 4

  11. 4

  12. 5

  13. 5

  14. 6

  15. 6

  16. 6

  17. 6

  18. 7

  19. 7

  20. 8

  21. 9

  22. 9

  23. 9

  24. 9

  25. 9

  26. BG oblouček 9

More Related