1 / 13

Agenda

Agenda. Review from last class Aside: application of chirped optical pulses EM waves in a waveguide: telecommunications Real optical communications systems Detector technology Optical design – question 5b). M.E.: 16.6 “Lasers” Siegman. Aside: Problem set 2 -Tuesday.

alton
Download Presentation

Agenda

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Agenda • Review from last class • Aside: application of chirped optical pulses • EM waves in a waveguide: telecommunications • Real optical communications systems • Detector technology • Optical design – question 5b) M.E.: 16.6 “Lasers” Siegman Aside: Problem set 2 -Tuesday. MIDTERM: 26 October 2004 7PM-8:30PM Location: Stirling412A and 412B Laser Optics – Phys460

  2. z 1. Review: chirped pulses Gaussian pulse duration Dispersion length Instantaneous frequency Peak of envelope: I should have been more careful: E() does change as a function of z. but frequency content CONSTANT (i.e., Abs[E()] constant) Laser Optics – Phys460

  3. Heme group with C0 attached to iron Energy vibrational levels Interatomic distance between C and O 2. Aside: application of chirped pulses • Unconventional control in a biological system Fe Laser Optics – Phys460

  4. 2. Aside, cont.: the experiment “unchirped” optical pulse HbCO IR pump IR probe Spectrometer Laser Optics – Phys460

  5. s43 s32 s21 s10 2. Aside, cont.: results  [wavenumber] 3E10cm/s =  [Hz] What absorption do I have due to 3->4 transition if: -no population in levels 3 and 4? -level 3 populated and no population in 4? Laser Optics – Phys460

  6. 3. Real world telecom: WDM Each channel a different “colour” INPUT time Real world: wavelength division multiplexing Coarse WDM: 20nm spacing Dense WDM: 100GHz spacing nm Laser Optics – Phys460

  7. 3. Telecom, detection WDM makes detection much easier: Passive wavelength selective filter time time time Laser Optics – Phys460

  8. 3. Telecom, detection • General detector technology • photovoltaic (photodiode, avalanche photodiode) • photomultiplier • photoconductor • thermal detectors (far infrared) • Issues for detection • “Dark” signal (noise equivalent power) • Quantum efficiency • Responsivity • Linearity • Speed • Ease of use 200nm-15m 200nm-1100nm 2-10m >1m Laser Optics – Phys460

  9.  z z z<0 z=0 4. Optical design – question 5b) • Each different “beam” has its own z coordinate system, with beam propagating in +z direction • Negative radius of curvature of a beam means a converging beam • Determine question requirements: • beam waist at 100m • small spot size z=0 z<0 Laser Optics – Phys460

  10. 4. Optical design: break down the problem • What do you know? balloon Unknown optical system Laser: 500nm 100m Divergence angle: 0.5mrad Spot size: 2mm Sets q input! Need biggest possible optics at output of optical system! AND R=-100m Laser Optics – Phys460

  11. 4. Optical design, cont. • Pick final optic! Unknown optical system Laser: 500nm R=Rin w=2mm R=-100m w=[optic diameter]/4 d1 d2 Laser Optics – Phys460

  12. 4. Optical design, cont. • If you can use ray optics, use ray optics (have to make sure z>>z0) • All rays transform by the same ABCD matrix. The most convenient ray to consider is the ray positioned w from the z-axis, since we can easily write its slope from R. • Can easily “convert” back to q parameter if we need to model as a Gaussian beam r’ R w R z r’=w/R assuming z>z0 Laser Optics – Phys460

  13. 4. Optical design, cont. • Check that z>>z0 throughout system Laser: 500nm R=Rin w=2mm R=-100m w=[optic diameter]/4 d1 d2 Laser Optics – Phys460

More Related