1 / 26

KAT-7/MeerKAT Commissioning

KAT-7/MeerKAT Commissioning. SPT and Commissioning teams * http://public.ska.ac.za/kat-7/kat-7-operations.

akio
Download Presentation

KAT-7/MeerKAT Commissioning

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. KAT-7/MeerKAT Commissioning SPT and Commissioning teams * http://public.ska.ac.za/kat-7/kat-7-operations * Bennett, T., Blose, S., Booth, R., de Villiers, M., Dikgale, A., Foley, T., Frank, B., Goedhart, S., Hess, K., Horrell, J., Lucero, D., Magnus, L., Mauch, T., Nemalili, T., Oozeer, N., Passmoor, S., Ratcliffe, S., Richter, L., Schwardt, L., Smirnov, O., Spann, R., Williams, L., Wilson, S., Wolleben, M., Zwart, J.,

  2. The commissioning plan The Single-dish Continuum Analysis PackagE SCAPE Work done so far Science verification process Overview

  3. High priority early in the project to document procedures that will be repeated often. PnP mentality Verification procedures will be built upon the foundations of previous procedures. Multiple commissioning teams will be implemented. Operations will be handled by a distinct set of personnel who then become responsible for operations and maintenance. Industrial commissioning

  4. 2014 - install test and commission 6 antennas 2015 - 29 antenna at about 3 per month 2016 - 29 in 8 months at about 4 per month Basic rule ... don't' panic MeerKAT rollout

  5. Surface accuracy Spectral modes Pointing calibration Primary beam Gain calibration Polarisation Search for unpolarized and polarized, but stable standard sources RFI System linearity Single dish

  6. Fringes confirmed Antenna location (delay) calibration Cross antenna coupling Measure common-mode phase errors Measure independent phase errors Cross correlation RFI Single baseline

  7. Dynamic fringes Phase Closure Measure cross-correlation phase stability Amplitude closure Measure interferometric gain stability Baseline calibration Baseline specific errors Band pass calibration and stability Absolute flux calibration Interferometric polarisation and calibration Imaging array

  8. Track commissioning parameters with time Imaging tests with a range of spectral resolutions, source complexity, brightness, in single-field interferometric mode, Dynamic range, Reproducibility, Noise level Mosaicing Polarization Fine tune observation procedures Calibrator surveys Spectral mode imaging, beamformer and VLBI still to be confirmed Science verification

  9. In-house suite of reduction software that is used to commission either a single dish or single baseline developed by L Schwardt Functionality includes basic h5 data extraction, simple data plotting including time series, spectra, spectrograms, beam fits, noise diode based temperature calibrations, fringe plotting, baseline fitting (position and delay), pointing model determination, basic RFI detection, source catalogues, as well as a whole suite of mathematical tools packaged together for ease of use. SCAPE

  10. Mosaicing - Maik Wolleben Mosaicing observation planning and reduction confirmed Primary beam correction Polarization - Maik Wolleben Confirmation of polarization calibration Off axis polarization performance Spectral lines - Sharmila Goedhart, Brad Frank NGC 3109 HI HI absorption MASERS Continuum observations - Nadeem Oozeer El Gordo Target of opportunity - Tony Foley (TAC) ATEL #3694 Science verification overview

  11. The next three slides show the work done to firstly plan mosaicing observations and second to reduce the data with the required calibration and corrections applied. Mosaicing • Left: KAT-7 Mosaic consisting of 49 Fields, 1.9 GHz • 10 hours total observing time (including calibrators) • Right: NVSS at 1.4 GHz shown for comparison

  12. Mosaicing • 1225 fields • observed during 3 consecutive nights • size: 10 x 10 deg in Galactic coordinates • integration time of each field: 30 s • RMS in the final image: 35 mJy/beam in Stokes I, 20 mJy/beam in polarized intensity. Probably due to ground radiation. Supernova Remnant SN 1006. (Type 1A observed in 1006 AD.)

  13. Spectral modes http://public.ska.ac.za/kat-7 Velocities are referenced to HI

  14. HI Velocity Field of NGC 3109 Observed using the wbc8k mode (10km/s spectral resolution for HI). The wbc8k mode was made available to commissioning to start testing observation and reduction strategies for the narrow band modes while the other modes are being developed. It illustrates the power of the ROACH design as the time from conception to first deployment was one day.

  15. PKS1814-637 absorption This was a short (10 min on source) observation to confirm the presence of the absorption structure The expected absorption line is at 1334 MHz.

  16. Single channel MASERNGC6334

  17. Images (line maps) at 1665 and 1667 MHz respectively

  18. Overlay of the narrow band contours on the continuum image

  19. Compared with ATCA at 1.6 GHz

  20. El Gordo (ACT-CL J0102-4915) Aim for observation • check for diffuse synchrotron emission • check polarization • derive spectral index and look for break in spectrum (derive/confirm physical parameters) • if no detection: may get only an upper limit • check expected rms using long integration.

  21. Comparison with SUMMS These sources are just above the detection limit of SUMSS but well detected with KAT-7

  22. radio relics

  23. PKS 1510-089 - ATEL-3694 Appart from monitoring the source PKS 1510-089 for the ATEL, the regular observations have been used to test the auto-delay (fringe stopping) functionality and to test interferometric pointing.

  24. PKS 1510-089 - auto_delay OFF ra: 15:12:50.6 Dec: -09.05.56.12 Bmaj: 2.97' Bmin: 2.86' rms of residual image: 13 mJy Fig: PKS1510-089 observed on 24-Feb 2012 with auto_delay OFF with 6 antennas (ant4 OUT).

  25. PKS 1510-089 - auto_delay testing ra: 15:12:49.9 Dec: -09.06.05.10 Bmaj: 5.52' Bmin: 2.94' rms of residual image: 40 mJy Fig: PKS1510-089 observed on 20-April 2012 with auto_delay ON with 5 antennas (ant2 and ant7 OUT).

  26. Summary • The industrial commissioning plan is being fine tuned • The software tools are in place to characterize the system • The operations and commissioning teams are getting valuable experience in using KAT-7 • We are already doing some continuum/transient science

More Related