1 / 5

How CI Foot Valve Regulates The Fluid Flow?

A CI foot valve is a necessary device that helps to hold the backward water flow into the sump. Most foot valves usually come outfitted with an inlet strainer. The strainer filters the water entered in it, preventing debris & trash in the water of the well from getting into the pipe and obstructing the valve, clogging it in the open position. Visit: http://www.ranjitmarketing.com/Plumbing-Valves/ci-foot-valves

Download Presentation

How CI Foot Valve Regulates The Fluid Flow?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HOW CI FOOT VALVE REGULATES THE FLUID FLOW?

  2. INTRODUCTION A CI foot valve is a necessary device that helps to hold the backward water flow into the sump. Most foot valves usually come outfitted with an inlet strainer. The strainer filters the water entered in it, preventing debris & trash in the water of the well from getting into the pipe and obstructing the valve, clogging it in the open position.

  3. THE NEED FOR CI FOOT VALVE In the process involving pulling of water from ground level, or in pumping fluid up from the sumps on the ground to the water storages over the multi-storied buildings, powerful electronic pump motors are employed. These electronic motors normally work by generating a suction that pulls the water up with the help of the water pipe at the needed height, where it is collected or stored for further distribution. 

  4. HOW CI FOOT VALVE FUNCTION? A CI foot valve also identified as a GM check valve. Check valve is a one-way valve, that is, it opens in only one direction. It enables only a unidirectional flow and closes off when the direction of flow changes backward.  Most CI foot valve is spring-loaded. So when the pulling power is removed, the springs in it pull it to shut tightly, making sure that the pipe is entirely sealed off, efficiently preventing any backward flow of water back into the ground well when the pump is switched off.

  5. CONTACT US We are an ISO 9001 company, established in March 2012. Ranjit Marketing resell and trade different types of valves & fire fighting extinguishers. Visit: Ranjit Marketing ADDRESS DELHI OFFICE: B-73, Fateh Nagar, Jail Road, New Delhi-110018 8506905100, 7838241205

More Related